{"title":"Black Friday Deals","description":"\u003cp\u003eBlack Friday Deals start NOW!\u003c\/p\u003e","products":[{"product_id":"steeda-focus-rs-cold-air-intake-2016","title":"Steeda Focus RS Cold Air Intake (2016+)","description":"\u003cp\u003eThe new 2016 MK3 Ford Focus RS is a fantastic performance platform that while already very good, can still be taken to the next level. Take the intake system of your 2.3L EcoBoost Focus RS to the next level with our in-house designed, tested, and manufactured Steeda Focus RS Cold Air Intake.\u003c\/p\u003e\n\u003cp\u003eThis Steeda Focus RS Cold Air Intake for the 2016 Focus RS does not require any ECM tuning making it an easy direct bolt-on. With peak to peak gains of 10 horsepower at the wheels and max gains of up to 16 horsepower, these are performance gains you will definitely feel. Our system incorporates a roto-molded thermoplastic airbox with a thermoplastic velocity stack, a high-flow serviceable air filter, and a silicone intake tube.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBetter intake temperatures.\u003c\/span\u003e The Steeda cold air intake gives your Mk3 Focus RS better intake air temperatures, this results in better performance and improved fuel economy. The lower IATs are a result of the design of the airbox, high flow filter, and the precision-molded thermoplastic velocity stack. The airbox was designed to utilize the cold air feed coming from the grille while sealing directly to the hood liner to ensure a cool, dense air charge to the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFederal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n\u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n\u003cli\u003eUtilizes the factory cold air feed duct from the grille\u003c\/li\u003e\n\u003cli\u003ePrecision-molded thermoplastic velocity stack\u003c\/li\u003e\n\u003cli\u003eDoes not require any engine tuning\u003c\/li\u003e\n\u003cli\u003eGreatly increased intake resonance\u003c\/li\u003e\n\u003cli\u003eLooks great under the hood\u003c\/li\u003e\n\u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788254679179,"sku":"555-3213","price":540.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/3213__83680.jpg?v=1792261723"},{"product_id":"sto-n-sho-2021-2024-ford-mach-e-gt","title":"Sto N Sho 2021-2025 Ford Mach-E GT","description":"\u003cp\u003e\u003cspan\u003eThis Sto-N-Sho license plate bracket is the perfect upgrade for your Mach-E GT and offers a couple of benefits. First, you can mount a front license plate without drilling visible holes into your front bumper. Second, the plate is removable, so when you are parked at a show and want a simple and clean look, just pull a pin and remove the plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eDiscreet mounting.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eWith Sto-N-Sho, you do not have to drill into the front of your bumper. Instead, the kit mounts to the bottom of your Mach-E, where mounting holes and such are not visible. This means you keep your front bumper looking good.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eQuick removal.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eA pin holds the mount in place and can be removed or reinstalled in seconds. This means that there is no hassle unscrewing or unbolting anything at a show. Park, pull the pin, and tuck the bracket away. When you are ready to go, put the bracket in, reinstall the pin, then head to your next destination.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFeatures \u0026amp; Benefits:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDurable construction\u003c\/li\u003e\n\u003cli\u003eWelded and anodized\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eMounts to underside of your car\u003c\/li\u003e\n\u003cli\u003ePrevents drilling visible holes\u003c\/li\u003e\n\u003cli\u003eEasily removable\u003c\/li\u003e\n\u003cli\u003eLow-profile mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788259823755,"sku":"SNS279a","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/sto-n-sho-front-license-plate-mount-v2__86110.jpg?v=1792261786"},{"product_id":"steeda-s650-ford-mustang-clutch-spring-assist-35-lb-in-2024","title":"Steeda S650 Ford Mustang Clutch Spring Assist 35 lb\/in (2024+)","description":"\u003cp\u003eYour 2024+ Mustang comes with a 130 lb\/in clutch assist spring installed from the factory. This high-rate spring is what causes such a vague and disconnected clutch pedal feel. The clutch pedal travels in a circular arc, with the spring assist in the middle of that clutch pedal travel. The middle of that motion compresses the spring initially and then allows it to extend after the first 30 degrees of travel. The combination of a high-rate assist spring and motion of the pedal during engagement causes a non-linear and sometimes confusing pedal feel. Having a non-linear pedal feel makes it difficult to modulate the clutch on your Mustang GT\/Dark Horse.\u003c\/p\u003e\n\u003cp\u003eMany new Mustang owners have found that taking out the stock spring will give you somewhat similar results, but realistically the clutch becomes far too heavy especially if your Mustang is daily driven. Most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By negating your factory clutch assist spring you will notice chatter\/NVH from your clutch pedal. Your clutch pedal will never fully return to stock position without any assist spring, and over time your slave cylinder may begin leaking due to constant pressure on its seals from the clutch pedal not returning to the stock position. Avoid these problems in the future by installing our Steeda Ford Mustang Clutch Spring Assist 35 lb\/in into your GT\/Dark Horse.\u003c\/p\u003e\n\u003cp\u003eOur Steeda S650 Mustang Clutch Assist Spring 35 lb\/in completely replaces the factory 130 lb\/in assist spring. Our engineers have honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in a Mustang. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. With the addition of our clutch assist spring, you will notice a much more linear feeling clutch - the reason being is that we take out much of the influence involved in your clutch pedal motion caused by the assist spring, allowing you to feel exactly what is happening with your clutch engagement.\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda S650 Mustang Clutch Assist Spring 35 lb\/in for your 2024+ Mustang GT\/Dark Horse at Steeda Autosports today!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eImprove clutch pedal engagement feel\u003c\/li\u003e\n\u003cli\u003eModulate your clutch engagement with ease\u003c\/li\u003e\n\u003cli\u003ePiano wire construction with high tensile strength and high elastic qualities\u003c\/li\u003e\n\u003cli\u003eConsistent spring rate and minimal sag even after repeated use\u003c\/li\u003e\n\u003cli\u003eMore linear clutch feel\u003c\/li\u003e\n\u003cli\u003eComplete replacement of factory 130 lb\/in clutch assist spring\u003c\/li\u003e\n\u003cli\u003eAvoid slave cylinder damage due to removal of stock clutch spring\u003c\/li\u003e\n\u003cli\u003eSteeda quality, backed by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788261953675,"sku":"555-7033","price":52.62,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-7033-v1-1__01006_0502721f-5e9c-4d81-8988-4561423aa65c.jpg?v=1792261807"},{"product_id":"steeda-mustang-gt-dark-horse-s650-with-filters-proflow-cold-air-intake-2024","title":"Steeda Mustang GT\/Dark Horse. S650 (With Filters) ProFlow Cold Air Intake (2024+)","description":"\u003cp\u003eSteeda's ProFlow Cold Air Intake for the S650 Mustang opens up the intake system to let the 4th Generation Coyote V8 breathe. With massive CNC-machined mass air meters and custom molded silicone tubes, this intake will impress. Our proven CNC-machined billet mass air meter delivers a clean signal to your mass air sensor for excellent response and driveability when getting off and on the throttle. This kit can utilize the factory airbox lids to retain the ram air effect of the stock airboxes, or the lids can be removed for an open intake that makes a statement at any show you go to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for peak performance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilizing decades of experience in tuning, designing cold air intakes, and racing Steeda has engineered this cold air intake to perform. It starts with our high-flow oiled air filters that reduce restriction. The CNC-machined mass air meter is massive at over 4.25\" ID and allows for unrestricted airflow. Our custom-made 4-ply silicone intake tube starts at 4.75\" ID and necks down to 95mm to increase velocity and also allow for throttle body upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested and proven.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSteeda has tested this intake with different driving styles and situations to ensure compatibility with the factory programming. The result is an intake system that improves performance when installed, will not negatively affect drivability, and is ready to provide additional performance improvements when tuning becomes available.\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda ProFlow Mustang 5.0L Cold Air Intake for 2024+ S650 at Steeda Autosports today!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOver 25% larger velocity intake tubes than the competition\u003c\/li\u003e\n\u003cli\u003eOver 6% larger mass air meter than the competition\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eTested on the street and track\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum mass air meters, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eSuperior MAF sensor signal\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum PCV line fitting, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eMaintains use of factory air boxes for ram air effect\u003c\/li\u003e\n\u003cli\u003eLower intake temps than competitors open air CAIs\u003c\/li\u003e\n\u003cli\u003eCan be run in a closed or open lid configuration\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish on machined parts\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eCustom-made 4-ply silicone hoses\u003c\/li\u003e\n\u003cli\u003eReusable oiled air filters\u003c\/li\u003e\n\u003cli\u003e+13 peak hp, +11 peak tq over the leading competitor\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFederal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788262019211,"sku":"555-3234","price":932.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/STA09440__88018.jpg?v=1792261811"},{"product_id":"steeda-mustang-gt-dark-horse-proflow-cold-air-intake-w-o-filters-2024","title":"Steeda Mustang GT\/Dark Horse S650 ProFlow Cold Air Intake w\/o Filters (2024+)","description":"\u003cp\u003eSteeda's ProFlow Cold Air Intake for the S650 Mustang opens up the intake system to let the 4th Generation Coyote V8 breathe. With massive CNC-machined mass air meters and custom molded silicone tubes, this intake will impress. Our proven CNC-machined billet mass air meter delivers a clean signal to your mass air sensor for excellent response and driveability when getting off and on the throttle. This kit can utilize the factory airbox lids to retain the ram air effect of the stock airboxes, or the lids can be removed for an open intake that makes a statement at any show you go to.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for peak performance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUtilizing decades of experience in tuning, designing cold air intakes, and racing Steeda has engineered this cold air intake to perform. The CNC-machined mass air meter is massive at over 4.25\" ID and allows for unrestricted airflow. Our custom-made 4-ply silicone intake tube starts at 4.75\" ID and necks down to 95mm to increase velocity and also allow for throttle body upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTested and proven.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSteeda has tested this intake with different driving styles and situations to ensure compatibility with the factory programming. The result is an intake system that improves performance when installed, will not negatively affect drivability, and is ready to provide additional performance improvements when tuning becomes available.\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda ProFlow Mustang 5.0L Cold Air Intake for 2024+ S650 at Steeda Autosports today!\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOver 25% larger velocity intake tubes than the competition\u003c\/li\u003e\n\u003cli\u003eOver 6% larger mass air meter than the competition\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eTested on the street and track\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum mass air meters, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eSuperior MAF sensor signal\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum PCV line fitting, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eMaintains use of factory air boxes for ram air effect\u003c\/li\u003e\n\u003cli\u003eLower intake temps than competitors open air CAIs\u003c\/li\u003e\n\u003cli\u003eCan be run in a closed or open lid configuration\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish on machined parts\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eCustom-made 4-ply silicone hoses\u003c\/li\u003e\n\u003cli\u003e+13 peak hp, +11 peak tq over the leading competitor\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFederal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\n\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788262183051,"sku":"555-3235","price":788.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/STA09402__77887.jpg?v=1792261810"},{"product_id":"steeda-explorer-rear-differential-brace-2020-2023","title":"Steeda Explorer Rear Differential Brace (2020-2025)","description":"\u003cp\u003e\u003cb\u003eProduct Benefits:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual bushing support\u003c\/li\u003e\n\u003cli\u003eCompatible with single and dual differential bushing designs from the factory\u003c\/li\u003e\n\u003cli\u003eEasily change diff fluid without removing the brace\u003c\/li\u003e\n\u003cli\u003eCNC-machined in in-house in the USA\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 and 12.9 hardware included\u003c\/li\u003e\n\u003cli\u003eZinc plated washers and spacers\u003c\/li\u003e\n\u003cli\u003eBillet steel locating sleeves increase strength and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePut the power down with this billet aluminum differential brace from Steeda! During testing, Steeda found that the differential bushings were being stretched to their limit with hard launches, so Steeda set out to disperse the load and minimize rear differential movement.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBillet construction.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTo keep the part lightweight yet ultra-strong, Steeda CNC machines this brace from 6061 billet aluminum at their Valdosta, GA location.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBetter performance.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWith 50% more attachment points than the competition and a dual bushing design, you can be confident this brace will out perform. An optional stiffer durometer bushing set can be added to the kit for those that are looking for maximum performance at the track and do not mind minor NVH.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePractical design.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eRetain great functionality when you upgrade with the differential brace. An access hole is machined into the brace to retain easy diff fluid changes. No need to remove or uninstall the Steeda brace.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788263886987,"sku":"555-8141","price":780.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/Brace.jpg?v=1792261825"},{"product_id":"steeda-focus-short-throw-shifter-late-02-11-all","title":"Steeda Focus Short Throw Shifter (Late 02-11 All)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduce shifting throw\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAccepts factory or aftermarket shifter knobs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved shift feel and accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThe Steeda Focus Short Throw Shifter for late 2002-2011 Focus was built for performance without compromising comfort. Rather than just chopping down the stick like the 'other' short throw shifters, we decided to re-engineer the entire shift mechanism with an improved pivot ratio and a more natural knob height. This results in shorter throws without making you bend over to reach the shifter. It's the best of both worlds in a CNC-machined billet steel package that a do-it-yourselfer can install in about an hour. This is the slickest shifting Tri-Ax yet!\u003c\/p\u003e\n\u003cp\u003ePurchase your Steeda Focus Short Throw Shifter for your late 2002-2011 Focus at Steeda Autosports today!\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788287611019,"sku":"555-7224","price":219.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-focus-short-throw-shifter-late-02-11-all-555-7224-0.jpg?v=1792262107"},{"product_id":"2015-2017-ford-mustang-with-track-pack-performance-pack-and-2015-50th-anniversary-edition-sns62a","title":"2015-2017 Ford Mustang with Track Pack (performance pack) and 2015 50th Anniversary Edition (SNS62a)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstructed of 5052 and 6061 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2015-2017 Ford Mustang GT with Performance Pack \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan\u003e2015 Ford Mustang 50th Anniversary Edition \u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: This bracket does NOT fit the 2015 Mustang with the 50th Anniversary\u003cstrong\u003e appearance package\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n  \u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eShow off your Ford Mustang's beautiful bumper with a \u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e quick release front license plate bracket!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever get a ticket for not having a front license plate again! Simply \u003cstrong\u003eSTO\u003c\/strong\u003e your front license plate when you want to \u003cstrong\u003eSHO\u003c\/strong\u003e the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/store-try8i50ooe.mybigcommerce.com\/content\/Installation%20Instructions\/License%20Plate%20Instructions%20SNS%2062a%20Center%20Only%202015%20Mustang%20Annivesary%20and%20GT%20Track%20Pak%205.0.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eINSTALLATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBig Mike’s Performance Parts’ \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ is a patented two-piece quick release front license plate bracket consisting of a front license plate holder and a base mounting plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNever requires holes to be drilled into the front of your bumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade to fit your car, which means the base plate is virtually undetectable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake off and put back on in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e quick release front license plate bracket is manufactured in the USA using quality materials and parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConstructed of 5052 and 6061 aluminums\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis Big Mike’s Performance Parts’ \u003cem data-mce-fragment=\"1\"\u003eSTO N SHO\u003c\/em\u003e™ requires no holes to be drilled on the underside of the vehicle for installation.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788288069771,"sku":"SNS62A","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS401bracket_2.webp?v=1792366723"},{"product_id":"steeda-mustang-alignment-kit-for-the-s550-rear-subframe-for-bmr-cb005-sr-kit-2015-2022","title":"Steeda Mustang Alignment Kit for the S550 Rear Subframe for BMR CB005 \/ SR Kit (2015-2022)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrectly align the rear end\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAligns rear ends with BMR CB005 Kit \u0026amp; SR Performance IRS Tie Down Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo increase in NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eYou asked and Steeda listened! The team here at Steeda went hard to work when we started fielding calls of the rear subframe being misaligned from the factory and there being no solution with the BMR CB005 \/ SR Performance IRS Tie Down kits. So here you have it, Steeda's new S550 IRS subframe alignment kit for the BMR CB005 \/ SR Performance IRS Tie Down kits!\u003c\/p\u003e\n\u003cp\u003eThe S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1\/2\" left to right. The Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other like the competition, preventing corrosion. Delrin is also less weight then aluminum or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory.\u003c\/p\u003e\n\u003cp\u003eOur Steeda S550 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary alignments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNote: An alignment is needed upon initial installation, due to the fact it could have been mis-aligned from the factory and with it now being squared in the chassis, some adjustments might need to be made. This part is designed to fit with BMR CB005 \u0026amp; SR Performance IRS Tie Down Kits. Purchase your Steeda Alignment Kit for the S550 Rear Subframe for BMR CB005 \/ SR Performance for your 2015+ Mustang at Steeda Autosports today\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288168075,"sku":"555-4447","price":87.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-s550-mustang-alignment-kit-rear-subframe-for-bmr-cb05-555-4447-01_1.jpg?v=1792262115"},{"product_id":"front-license-plate-for-2021-ford-mustang-mach-1-without-handling-pack","title":"Front License Plate For 2021-2023 Ford Mustang Mach 1 WITHOUT Handling Pack","description":"\u003cul\u003e\n\u003cli\u003ePrevent drilling your front bumper to mount your front\u003c\/li\u003e\n\u003cli\u003eEasily detachable for car shows or track days\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eLifetime Sto N Sho Warranty\u003c\/li\u003e\n\u003cli\u003eSto N Sho quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eShow off your Ford Mustang Mach 1's beautiful bumper with a \u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e quick release front license plate!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis DOES NOT fit with the handling pack.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever get a ticket for not having a front license plate again! Simply \u003cstrong\u003eSTO\u003c\/strong\u003e your front license plate when you want to \u003cstrong\u003eSHO\u003c\/strong\u003e the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/span\u003e\u003ca href=\"https:\/\/store-try8i50ooe.mybigcommerce.com\/content\/Installation%20Instructions\/License%20Plate%20Instructions%20SNS%20280%202021%20Mustang%20Mach%201%20WO%20Handling%20Package.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ is a patented two-piece quick release front license plate bracket consisting of a front license plate holder and a base mounting plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNever requires holes to be drilled into the \u003cstrong\u003efront\u003c\/strong\u003e of your bumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade to fit your car, which means the base plate is virtually undetectable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake off and put back on in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e quick release front license plate bracket is manufactured in the USA using quality materials and parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConstructed of 5052 and 6061 aluminums\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ requires no holes to be drilled on the underside of the vehicle for installation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2021-23 Ford Mustang Mach 1\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll parts required for installation included, however, tools are required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Actual bracket may vary from picture based on model\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788288200843,"sku":"SNS280","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS280_bracket_w1w__15421.1637704621.jpg?v=1792262116"},{"product_id":"steeda-mustang-strut-tower-cutting-tool-2015-2022","title":"Steeda Mustang Strut Tower Cutting Tool (2015-2022)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSelf-centering design for the cleanest cut possible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMetal cutting specific blade for cleanest and fastest cut\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAllows for extreme alignment specs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStrut removal not required in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSteeda's strut tower cutting tool allows you to take full advantage of your Steeda camber plates and dial in extreme negative camber without hacking up your strut towers and having to remove your struts!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDial-in Impressive angles\u003c\/span\u003e. Even after installing a Steeda camber plate, you might not be able to get the alignment specs you need due to interference between the strut nut and strut tower. In this instance, opening up the hole diameter in your strut tower is mandatory to achieve the handling performance you desire without compromise. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean stock appearance.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSteeda's tool design uses a premium grade metal cutting hole saw to produce a perfectly concentric hole centered on the factory original rather than notching the strut tower with a cut off wheel or die grinder. Using the outer diameter of the Delrin guide plug, the cutting teeth produce a clean cut that can be deburred with fine sandpaper to prevent finger cuts when making alignment adjustments. The Morse hole saw Steeda uses in their kit is specifically designed to cut metal not wood and provides the fastest and cleanest cut possible. The raw metal edge can be sanded smooth and finished with either regular paint or touch up paint matching your body color for a near-identical appearance to stock.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo hassle mod.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUntil now no other product allowed you to enlarge your strut tower hole without removing your struts and having to take your car in for realignment. Steeda designed their tool with a clearance hole in the Delrin guide plug that fits over OE and most aftermarket most strut nuts. Furthermore, the Steeda design does not use a drill bushing that relies on the 1\/4\" pilot bit to center the hole. The smooth Delrin bushing provides perfect self-alignment and cannot snap like a 1\/4\" pilot bit in the middle of the hole cutting operation. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with most hole saw arbors.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe 2-3\/4\" hole saw Steeda uses is universally compatible with most hole saw arbors with a threaded 5\/8\"-18 threaded inner diameter regardless of pilot bit  since our design eliminates the need for a 1\/4\" pilot drill bit. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNon-returnable, no warranty part.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe hole saw included with this kit is a consumable item meaning it will become dull after multiple uses and teeth can chip off due to operator error at excessive drill speed. The Delrin pilot plug may also become worn due to the sacrificial nature of it's precise self centering design. Using slow drill RPM, moderate pressure and cutting oil on both the Delrin plug and Bi-metal cutting teeth will maximize the life of this tool. We believe your Mustang is an investment that justifies the expense of doing the job correctly with this tool and will maintain the value of your car. \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288495755,"sku":"555-8920","price":105.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8920-2.jpg?v=1792262121"},{"product_id":"steeda-mustang-rear-lower-control-arm-bushings-2015-2022","title":"Steeda Mustang Rear Lower Control Arm Bushings (2015-2024)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReplacement and upgrade\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess bushing deflection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRestores handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eThis rear LCA bushing kit replaces the inner, front bushing of the rear lower control arm. This replaces a worn factory bushing to correct uneven tire wear, unpredictable handling, and poor braking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eReplace and upgrade.\u003c\/span\u003e A worn bushing can negatively impact performance, tire life, braking, and other important aspects of driving. Restore the handling and functionality by replacing the bushing with this upgraded polyurethane one. The polyurethane will have a longer life in addition to less deflection.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788289249419,"sku":"555-4047","price":70.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/W63498-s550_thumbnail.jpg?v=1792262137"},{"product_id":"steeda-escape-rear-sway-bar-2020-2022","title":"Steeda Escape\/Maverick AWD Rear Sway Bar (2020-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNeutral and flat handling\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003cli\u003eMore control with heavy loads\u003c\/li\u003e\n\u003cli\u003eLess trailer sway when towing\u003c\/li\u003e\n\u003cli\u003eMaintains a comfortable ride\u003c\/li\u003e\n\u003cli\u003e1.00\" tubular steel sway bar\u003c\/li\u003e\n\u003cli\u003e3-way adjustable\u003c\/li\u003e\n\u003cli\u003e280lb, 350lb, and 450lb rates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's Escape\/Maverick AWD adjustable rear sway bar gives you control of your Ford's handling. The sway bar reduces body roll for more neutral handling helping you take corners better. The sway bar offers a comfortable ride for your CUV but keeps things level through corners.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStability and control.\u003c\/span\u003e Distributing the weight of your Escape or Maverick between the rear wheels when turning, the sway bar helps to keep your Ford level in corners and planted to the road. Trailer sway is reduced when towing and control is better with heavy payloads, so you can drive with confidence.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrong construction.\u003c\/span\u003e Steeda's sway bar is designed, engineered, and manufactured in the USA and is made from 1-inch tubular Chromoly steel tubing for long-lasting performance and durability. CNC-machined billet steel ends offer greater strength than the coined ends on other bars. The bar is powder-coated Steeda blue for protection from the elements and to let people know your Escape is equipped with Steeda parts.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eSporty feel.\u003c\/span\u003e The flat and level handling that the sway bar provides makes driving more exciting and enjoyable. Get tight handling like a sports car with the upgraded sway bar. 3-way adjustability lets you fine-tune the sway bar stiffness to meet your needs and provide the control you want. At its softest, the bar is 280lb per inch and at its stiffest, the bar is 450lb per inch, a lot stiffer than your factory 270lb per inch sway bar. It is recommended that you start at the middle adjustment hole for the first setup.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788292460683,"sku":"555-1031","price":324.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-1031-1.jpg?v=1792262193"},{"product_id":"steeda-escape-bronco-sport-strut-tower-brace-2020-2022","title":"Steeda Escape\/Bronco Sport\/Maverick Strut Tower Brace - Black (2020-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSporty look\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter steering response\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreater stability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSimple to install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTextured black powder coat finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDoes not fit hybrid models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eIf you are looking to add a custom look to your engine bay and want better steering response, the Steeda strut tower brace is the perfect upgrade. This brace adds a custom touch while blending with the factory trim for a clean and stylish look when you pop the hood. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eTextured finish.\u003c\/span\u003e The brace has a seamless look with the rest of your engine bay. A textured black finish is applied to the brace and gives the brace a similar look to the factory trim and pieces.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePredictable handling.\u003c\/span\u003e Stiffening and supporting the strut towers will help reduce flex and improve the response of your vehicle when turning. This is a great way to get a more exciting feel and better handling from your Ford. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eNote:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eWill not fit hybrid models.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788292493451,"sku":"555-5736","price":210.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-5736-v1-1.jpg?v=1792262194"},{"product_id":"steeda-mustang-gt350-mach-1-irs-subframe-bushing-support-system-2016-2022","title":"Steeda Mustang GT350\/Mach 1 IRS Subframe Bushing Support System (2016-2023)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncreases traction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced road-feel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade from billet aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC machined\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLifetime warranty\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSame patented design as the 10-piece kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eMaintain control of your GT350 or Mach 1 and prevent it from losing traction due to wheel hop with this IRS bushing support system from Steeda. This is one of the first and most simple steps that should be taken to eliminate wheel hop. It is recommended that you also install the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/s550-irs-subframe-aligment-kit-555-4438\"\u003eSteeda subframe alignment kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eat this time because you will already be working in that area. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEliminate subframe movement.\u003c\/span\u003e The Steeda IRS subframe bushing support system eliminates the rear subframe movement that is notorious in the S550 Mustang platform. Stiffening the subframe and preventing movement is the way to reduce and eliminate the troublesome wheel hop that plagues the Mustang when launching or taking tight corners. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEnhanced road-feel.\u003c\/span\u003e Installing the Steeda bushing support kit gives the driver a better feel for the road, letting the driver feel connected to the car. This makes spirited and track driving more enjoyable and more responsive. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo Increase in NVH.\u003c\/span\u003e Drive comfortably on the street with the Steeda bushing support kit. The bushing supports add no NVH to your Mustang so that your highway cruising and in-town commute are as comfortable as they were on your stock Mustang. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eQuality construction.\u003c\/span\u003e CNC machined in Steeda's Valdosta, GA facility from T6061 aircraft grade billet aluminum for the highest quality construction. \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788294787211,"sku":"555-4449","price":184.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-4449-v1-1_1.jpg?v=1792262258"},{"product_id":"steeda-explorer-strut-tower-brace-2020-2021","title":"Steeda Explorer Strut Tower Brace (2020-2025)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncreased front rigidity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved response\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDresses up the engine bay\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDurable construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWrinkle black powder-coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThe Explorer ST offers improved handling and better performance over the other trim levels, but you may be after more. Get even better handling and dress up the engine bay with the Steeda strut tower brace. \u003cbr\u003e\u003cbr\u003eIncreased rigidity. A stamped steel strut tower brace comes standard on the Explorer ST but it may not offer the greatest performance. The Steeda strut tower brace features strong steel tubing and sturdy mounting plates to ensure great strength.\u003cbr\u003e\u003cbr\u003eCustom look. The Steeda brace is an eye-catching upgrade over the stamped steel piece. This brace is a great way to give your SUV a unique look at meets and shows. The wrinkle black powder coat finish matches the factory trim and looks great in the engine bay. \u003cbr\u003e\u003cbr\u003eEasy installation. Only basic hand tools are needed to install the strut tower brace and installation can be completed at home in a garage or driveway. Upgrading the strut tower brace should only take a couple of minutes. \u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788295049355,"sku":"555-5734","price":280.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-5734-v1-1.jpg?v=1792262265"},{"product_id":"steeda-mustang-clutch-assist-spring-and-perch-upgrade-kit-2011-2014","title":"Steeda Mustang Clutch Assist Spring and Perch Upgrade Kit (2011-2014)","description":"\u003cul\u003e\n \u003cli\u003eImprove clutch pedal engagement feel Modulate your clutch engagement with ease\u003c\/li\u003e\n \u003cli\u003ePiano wire construction with high tensile strength and high elastic qualities Consistent spring rate and minimal sag even after repeated use\u003c\/li\u003e\n \u003cli\u003eMore linear clutch feel Complete replacement of factory 200 lb\/in clutch assist spring\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c!-- split --\u003e\n \u003cp\u003e\u003cspan\u003eSteeda's ever so popular S197 Clutch Spring Assist is now available with a Heavy Duty Spring Perch assembly, therefore eliminating the worry of you breaking the factory one upon installation or removal.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYour 2011-2014 Mustang comes with a 200 lb\/in clutch assist spring installed from the factory. This high-rate spring is what causes such a vague and disconnected clutch pedal feel. The clutch pedal travels in a circular arc, with the spring assist in the middle of that clutch pedal travel. The middle of that motion compresses the spring initially and then allows it to extend after the first 30 degrees of travel. The combination of a high-rate assist spring and motion of the pedal during engagement causes a non-linear and sometimes confusing pedal feel. Having a non-linear pedal feel makes it hard to modulate the clutch on your S197 Mustang.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMany Mustang GT, V6 or Boss owners have found that taking out the stock OE spring will give you somewhat similar results, but realistically the clutch becomes far too heavy especially if your Mustang is daily driven. Most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By negating your factory clutch assist spring you will notice chatter\/NVH from your clutch pedal. Your clutch pedal will never fully return to stock position without any assist spring, and over time your slave cylinder may begin leaking due to constant pressure on its seals from the clutch pedal not returning to the stock position. Avoid these problems in the future by installing our Steeda S197 Mustang Clutch Assist Spring 95 lb\/in into your GT, V6 or Boss.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOur Steeda S197 Mustang Clutch Assist Spring 95 lb\/in completely replaces the factory 200 lb\/in assist spring. Our engineers have honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in a Mustang. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. With the addition of our clutch assist spring, you will notice a much more linear feeling clutch - the reason being is that we take out much of the influence involved in your clutch pedal motion caused by the assist spring, allowing you to feel exactly what is happening with your clutch engagement.\u003c\/span\u003e\u003c\/p\u003e\n \u003c!-- split --\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788295278731,"sku":"555-7030","price":140.34,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5557030-A.jpg?v=1792262271"},{"product_id":"steeda-pro-action-mustang-shocks-and-struts-non-adjustable-2015-2021","title":"Steeda Pro-Action Mustang Shocks and Struts - Non-Adjustable (2015-2023)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter handling with exceptional ride quality\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProperly valved for your Mustang\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreat for street and track action!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eLooking for a cost effective alternative to adjustable shocks and struts? Here is the answer. Steeda's new Pro-Action fixed valve shocks and struts for the S550 Mustang GT, V6 and EcoBoost. Steeda's Pro-Action shocks and struts were engineered by Steeda and manufactured to provide the ultimate in ride quality and handling while exceeding OE standards for durability and build quality. Pro Action shocks and struts come with a limited lifetime warranty against manufacturing defects and are perfect for daily street driving or open track use.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788295344267,"sku":"555-8150","price":859.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8150_d8823bd9-a2f1-40bf-9898-d6d72e940471.jpg?v=1792262272"},{"product_id":"steeda-mustang-coupe-full-length-jacking-rails-2015-2021","title":"Steeda Mustang Coupe Full-Length Jacking Rails (2015-2024)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e25% lighter than the competition, only 11.6 lbs!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAllows you to jack up your S550\/S650 anywhere along the jacking rail, preventing damage to your factory pinch welds\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWill work with Steeda's popular IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePowdercoated for a sleek and durable finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFull-length design for greater stability and additional jacking point options\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes all necessary mounting hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProvides extra room for jacks and stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*Please note: This item is considered an oversized item and may require additional shipping, feel free to contact us\u003c\/strong\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThe team at Steeda was asked to come up with a full-length version of our incredibly popular Ultra-Lite Low-Profile Chassis Jacking Rails for your 2015+ S550 Mustang Fastback and we delivered! Made from the best steel tubing we have used to keep Fox Mustangs from flexing for 25+ years, Steeda's new Full-Length, Ultra-Lite, Low-Profile Chassis Jacking Rails are CAD-designed to exact specifications for impeccable fitment. The full-length design has more surface area for jacks and jack stands which help make installing your other Steeda parts a breeze!\u003cbr\u003e\u003cbr\u003ePowdercoated wrinkle black for a low key, yet durable finish, these will last a lifetime under your S550\/S650 Mustang. Steeda also includes all of the necessary hardware for a simple bolt-in design that can be removed at any time. And best of all, these still work with Steeda's IRS Subframe Support Braces without interference! Steeda's new Full-Length, Ultra-Lite, Low-Profile Chassis Jacking Rails add convenience and function to your S550 Mustang.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788295540875,"sku":"555-5212","price":254.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/download_4.jpg?v=1792262275"},{"product_id":"coyote-wheel-spacers-1-5-inch-set-of-2-94-14-mustang","title":"Coyote Wheel Spacers (1.5 inch) set of 2 (94-14 Mustang)","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers\u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Refunds\u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Thread\" class=\"col data\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eHex\u003c\/th\u003e\n\u003ctd data-th=\"Hex\" class=\"col data\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Bolt Pattern\" class=\"col data\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd data-th=\"Wheel Bolt Pattern\" class=\"col data\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd data-th=\"Stud Thread\" class=\"col data\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd data-th=\"ID (Vehicle Side)\" class=\"col data\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd data-th=\"OD (Wheel Side)\" class=\"col data\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd data-th=\"Adapter Diameter\" class=\"col data\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eThickness\u003c\/th\u003e\n\u003ctd data-th=\"Thickness\" class=\"col data\"\u003e1.50 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eFinish\u003c\/th\u003e\n\u003ctd data-th=\"Finish\" class=\"col data\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eIncluded\u003c\/th\u003e\n\u003ctd data-th=\"Included\" class=\"col data\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eType\u003c\/th\u003e\n\u003ctd data-th=\"Type\" class=\"col data\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788296327307,"sku":"5450-5450-C","price":123.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-c_1_d63f892c-9967-4e2a-a7b7-3a94824cbd14.jpg?v=1792262288"},{"product_id":"coyote-wheel-spacers-1-25-inch-set-of-2-94-14-mustang","title":"Coyote Wheel Spacers (1.25 inch) set of 2 (94-14 Mustang)","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers \u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Refunds \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Thread\" data-mce-fragment=\"1\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eHex\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Hex\" data-mce-fragment=\"1\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Bolt Pattern\" data-mce-fragment=\"1\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Wheel Bolt Pattern\" data-mce-fragment=\"1\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Stud Thread\" data-mce-fragment=\"1\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"ID (Vehicle Side)\" data-mce-fragment=\"1\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"OD (Wheel Side)\" data-mce-fragment=\"1\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Adapter Diameter\" data-mce-fragment=\"1\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Material\" data-mce-fragment=\"1\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eThickness\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Thickness\" data-mce-fragment=\"1\"\u003e1.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Finish\" data-mce-fragment=\"1\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eIncluded\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Included\" data-mce-fragment=\"1\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eType\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Type\" data-mce-fragment=\"1\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788296360075,"sku":"5450-5450-B","price":78.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-a_1_ff3378f7-72fe-419d-8b5f-9154cf7838e2.jpg?v=1792262290"},{"product_id":"coyote-wheel-spacers-1-inch-set-of-2-94-14-mustang","title":"Coyote Wheel Spacers (1 inch) set of 2 (94-14 Mustang)","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers\u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Refunds \u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Thread\" data-mce-fragment=\"1\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eHex\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Hex\" data-mce-fragment=\"1\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Bolt Pattern\" data-mce-fragment=\"1\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Wheel Bolt Pattern\" data-mce-fragment=\"1\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Stud Thread\" data-mce-fragment=\"1\"\u003e1\/2 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"ID (Vehicle Side)\" data-mce-fragment=\"1\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"OD (Wheel Side)\" data-mce-fragment=\"1\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Adapter Diameter\" data-mce-fragment=\"1\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Material\" data-mce-fragment=\"1\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eThickness\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Thickness\" data-mce-fragment=\"1\"\u003e1.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Finish\" data-mce-fragment=\"1\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eIncluded\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Included\" data-mce-fragment=\"1\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth class=\"col label\" scope=\"row\" data-mce-fragment=\"1\"\u003eType\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Type\" data-mce-fragment=\"1\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788296392843,"sku":"5450-5450-A","price":78.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-a_1_f82da6e2-0fca-4c2c-8bff-6a86f48060ed.jpg?v=1792262290"},{"product_id":"steeda-s550-mustang-billet-rear-shock-mount-12mm-2015-2021","title":"Steeda S550\/S650 Mustang Billet Rear Shock Mount - 12mm (2015-2024)","description":"\u003cul\u003e\n\u003cli\u003eBetter rear shock control\u003c\/li\u003e\n\u003cli\u003eCompatible with adjustable shocks\u003c\/li\u003e\n\u003cli\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eSteeda also designed this kit to provide 1\/4\" more clearance for wide rear tires!\u003c\/li\u003e\n\u003cli\u003eMade to fit any aftermarket shocks with a 12MM thread size diameter\u003c\/li\u003e\n\u003cli\u003eDoes not fit magneride suspension applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOnce the aftermarket shocks started coming out for the S550 (2015+) Mustang people all across the country ran into issues breaking the factory rear shock mount. Whether it was drag racing or road racing with very stiff shocks, customers were having all sorts of issues. That's when the team at Steeda got together to come up with a solution.\u003cbr\u003e\u003cbr\u003eMade from billet 6061 aluminum, these mounts are designed to replace the weak cast factory units. Unlike the factory mounts that have a rubber bushing that binds and will deteriorate over time on lowered cars or cars with aggressive shock settings, these units feature a Steeda spec stainless steel spherical Teflon lined bearing for optimum performance and control. Unlike other aftermarket mounts, these mounts are compatible with adjustable shocks that utilize a top-mounted adjuster. Steeda also designed this kit to provide 1\/4\" more clearance for wide rear tires on S550 Mustangs.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788296458379,"sku":"555-8152","price":403.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8160-4_7502f55c-1e5d-4c41-ba7a-32ba6735fbf9.jpg?v=1792262293"},{"product_id":"steeda-s550-mustang-billet-rear-shock-mount-10mm-2015-2021","title":"Steeda S550\/S650 Mustang Billet Rear Shock Mount - 10mm (2015-2024)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter rear shock control\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with adjustable shocks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBolt-in installation\u003c\/li\u003e\n\u003cli\u003eSteeda also designed this kit to provide 1\/4\" more clearance for wide rear tires!\u003c\/li\u003e\n\u003cli\u003eMade to fit the factory shock thread diameter or any aftermarket shock 10MM\u003c\/li\u003e\n\u003cli\u003eDoes not fit magneride suspension applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOnce the aftermarket shocks started coming out for the S550 (2015+) Mustang people all across the country ran into issues breaking the factory rear shock mount. Whether it was drag racing or road racing with very stiff shocks, customers were having all sorts of issues. That's when the team at Steeda got together to come up with a solution.\u003cbr\u003e\u003cbr\u003eMade from billet 6061 aluminum, these mounts are designed to replace the weak cast factory units. Unlike the factory mounts that have a rubber bushing that binds and will deteriorate over time on lowered cars or cars with aggressive shock settings, these units feature a Steeda spec stainless steel spherical Teflon lined bearing for optimum performance and control. Unlike other aftermarket mounts, these mounts are compatible with adjustable shocks that utilize a top-mounted adjuster. Steeda also designed this kit to provide 1\/4\" more clearance for wide rear tires on S550 Mustangs.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788296491147,"sku":"555-8151","price":464.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8160-4.jpg?v=1792262294"},{"product_id":"2015-2020-ford-mustang-shelby-gt350-gt350r-license-plate-bracket","title":"2020-2022 Ford Mustang Shelby GT500 License Plate Bracket","description":"\u003cul\u003e\n\u003cli\u003ePrevent drilling your front bumper to mount your front\u003c\/li\u003e\n\u003cli\u003eEasily detachable for car shows or track days\u003c\/li\u003e\n\u003cli\u003eBuilt from high-quality aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation\u003c\/li\u003e\n\u003cli\u003eLifetime Sto N Sho Warranty\u003c\/li\u003e\n\u003cli\u003eSto N Sho quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eNever get a ticket for not having a front license plate again! Simply STO your front license plate when you want to SHO the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788296556683,"sku":"SNS234","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS234_bracket_w1w__74897.1613585976.jpg?v=1792262296"},{"product_id":"steeda-hardcore-mustang-gt-proflow-closed-cold-air-intake-2015-2021","title":"Steeda HARDCORE Mustang GT ProFlow Closed Cold Air Intake (2015-2023)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCAD designed air box lid and tube [sealed]\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLargest mass air meter on the market (121mm) for most airflow possible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoolest intake air temperatures (IATs) on the market for consistent performance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e25HP increase more then stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e30HP increase over stock at mid-range [max gains]\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFits all 2015+ S550 Mustang GTs, including 2018 and newer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes our washable Steeda S550 Mustang Oiled Air Filter ( #555-3221)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eQuick and easy install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e***TUNE REQUIRED***\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRetains all factory vacuum lines with optional sound tube delete\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUtilizes the factory grille duct\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo turbulence due to placement of factory hood vents on 2018\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eHorsepower per dollar, Steeda's S550 Mustang GT ProFlow Closed Cold Air Intake is the best choice for stock intake manifold 2015+ Coyote powered Mustangs. Steeda ProFlow Mustang Cold Air Intake for your S550 opens up the induction system of Ford's 5.0 powerplant and allows it to breathe much more freely than the stock intake system allows, taking your S550 Mustang GT to the highest level of performance. The system comes with an oiled reusable high flow panel filter and a high flow dry filter is available separately.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788296654987,"sku":"555-3220","price":789.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-3220-main.jpg?v=1792262297"},{"product_id":"s550-coyote-wheel-spacers-20mm-set-of-2","title":"Ford Mustang S550\/S650\/Explorer 2015-2026 Coyote Wheel Spacers (20MM) set of 2","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTorque Wheels \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTorque Spacers \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Returns Or Refunds \u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Thread\" class=\"col data\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eHex\u003c\/th\u003e\n\u003ctd data-th=\"Hex\" class=\"col data\"\u003e21mm (13\/16\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Bolt Pattern\" class=\"col data\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd data-th=\"Wheel Bolt Pattern\" class=\"col data\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd data-th=\"Stud Thread\" class=\"col data\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd data-th=\"ID (Vehicle Side)\" class=\"col data\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd data-th=\"OD (Wheel Side)\" class=\"col data\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd data-th=\"Adapter Diameter\" class=\"col data\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eThickness\u003c\/th\u003e\n\u003ctd data-th=\"Thickness\" class=\"col data\"\u003e20mm (0.79\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col label\"\u003eType\u003c\/th\u003e\n\u003ctd data-th=\"Type\" class=\"col data\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788297146507,"sku":"5450-5450H-AA705-14","price":88.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-aa_5.jpg?v=1792262310"},{"product_id":"steeda-explorer-3-5l-ecoboost-throttle-body-spacer-2013-2019","title":"Steeda Explorer 3.5L EcoBoost Throttle Body Spacer (2013-2019)","description":"\u003cul\u003e\n\u003cli\u003eIncreased horsepower and torque\u003c\/li\u003e\n\u003cli\u003eIncreased fuel economy\u003c\/li\u003e\n\u003cli\u003eCNC billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eSimple bolt on design\u003c\/li\u003e\n\u003cli\u003eExact fitment for 3.5L TT Explorer\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's billet aluminum throttle body spacer is an easy to bolt on designed specifically for the 2013+ 3.5L Ecoboost twin turbo Explorer Sport. This high quality piece is made from CNC machined 6061 billet aluminum and is designed to give you more plenum volume for increased horsepower. The patented swirl design helps promote airflow by breaking the surface tension of the incoming air. This throttle body spacer will increase horsepower and fuel mileage for a better driving experience. The top surface features CNC machined Steeda lettering along with the our signature Steeda Sidewinder. Kit includes easy to follow instructions and serviceable O-ring gasket. This product is covered with Steeda's no hassle lifetime warranty.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788297801867,"sku":"555-3226","price":122.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/46-33018a16001530809075_thumbnail.jpg?v=1792262321"},{"product_id":"steeda-strut-nut-socket-22mm","title":"Steeda Strut Nut Socket - 22mm","description":"\u003cspan data-mce-fragment=\"1\"\u003eSteeda likes to make installs as easy as we can on our customers, and the right tools make jobs so much easier. And the Steeda Strut Nut Sockets do just that! The cutout area of the socket allows for access to the shock or strut shaft. This allows for an allen key or box wrench to hold the shaft while the nut is torqued to the correct specification.\u003c\/span\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788298653835,"sku":"555-8914","price":35.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555891401.jpg?v=1792262329"},{"product_id":"steeda-strut-nut-socket-21mm","title":"Steeda Strut Nut Socket - 21mm","description":"\u003cspan data-mce-fragment=\"1\"\u003eSteeda likes to make installs as easy as we can on our customers, and the right tools make jobs so much easier. And the Steeda Strut Nut Sockets do just that! The cutout area of the socket allows for access to the shock or strut shaft. This allows for an allen key or box wrench to hold the shaft while the nut is torqued to the correct specification.\u003c\/span\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788298686603,"sku":"555-8913","price":35.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555891301.jpg?v=1792262330"},{"product_id":"steeda-s550-mustang-gt-drag-springs-linear-2015-2020","title":"Steeda S550\/S650 Mustang GT Drag Springs - Linear (2015-2024)","description":"\u003cul\u003e\n\u003cli\u003eBetter weight transfer and traction on launch\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but maintains outstanding street-able ride\u003c\/li\u003e\n\u003cli\u003eSteeda collaborates with the best motorsport spring engineers in the industry to provide you the best products possible\u003c\/li\u003e\n\u003cli\u003eSteeda springs are developed using advanced proprietary CAD data, and our exclusive 3D modeling setting us apart from the others\u003c\/li\u003e\n\u003cli\u003eLIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003eLooking for competition proven performance for your S550 Mustang while maintaining the ability to drive it on the street? Steeda has the springs for you! Our experience and expertise in high-performance street and racing suspension systems is second to none, and the team here at Steeda has put that to work for you. Designed for ALL street and drag racing applications, Steeda's Drag springs are perfect for the drag racer that likes to drive his car to the track. These springs help with weight transfer and planting the rear wheels for maximum traction on launch. The Steeda Drag springs lower your S550 Mustang 1.25\" in the front and 0.5\" in the rear while maintaining optimal rates of 150lb\/in. in the front and 800lb\/in. in the rear. Pair these with our Pro-Action shocks and struts as well as other Steeda suspension products to make your S550 Mustang a winner!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788300062859,"sku":"555-8231","price":535.08,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/ezgif.com-gif-maker_5.jpg?v=1792262362"},{"product_id":"s550-coyote-wheel-spacers-1-25-inch-set-of-3","title":"Ford Mustang S550\/S650\/Explorer 2015-2026 Coyote Wheel Spacers (1.25 inch) set of 2","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers \u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Returns \u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"data-table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"first odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eHex\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eThickness\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e1.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eIncluded\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eType\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788301045899,"sku":"5450-5450-B14","price":78.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-a_1_d58ffd5e-bcf8-4807-9b1f-821d6bf9cfd0.jpg?v=1792262371"},{"product_id":"s550-mustang-ultralite-2-point-g-trac-brace-ecoboost-automatic-gt500-2018-2020","title":"S550 Mustang Ultralite 2-Point G-Trac Brace Ecoboost Automatic\/GT500 (2018-2024)","description":"\u003cul\u003e\n\u003cli\u003eImproves chassis stiffness and suspension compliance\u003c\/li\u003e\n\u003cli\u003eWeighs in at a mere 5.5 lbs, over 50% lighter than the competition\u003c\/li\u003e\n\u003cli\u003eExtremely compatible with other aftermarket components (headers, etc.)\u003c\/li\u003e\n\u003cli\u003eImproves vehicle response and predictability Installs in minutes\u003c\/li\u003e\n\u003cli\u003eMade in the USA, lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSteeda's G-Trac Brace is designed specifically for 2018 and newer Mustangs produced with a 2.3L Ecoboost and 10 speed automatic 10R80 transmission combination as well as the new GT500. Based off our battle proven S550 design, our newest G-Trac brace has addittional clearance with the same chassis stiffening strength of the original.\u003c\/p\u003e\n\u003cp\u003eInstall is simple procedure involving a couple of nuts, bolts and Steeda's clever design spacers. Corrossion resistant powder coating and plated fasters ensure life long service. The high strength tubular design prevents chassis flex for improved handling, ride, and steering control.\u003c\/p\u003e\n\u003cp\u003eGive yourself the competitive advantage with a more responsive turn in, faster lap times, and a more predictable handling experience with Steeda's S550 Ultralight 2-Point G-Trac Brace today!\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788301242507,"sku":"555-5535","price":192.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-5534-1.jpg?v=1792262378"},{"product_id":"2018-2020-ford-mustang-without-performance-pack-front-license-plate-mount","title":"2018-2023 Ford Mustang without Performance Pack Front license plate mount","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNever requires holes to be drilled into the front of your bumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMade to fit your car, which means the base plate is virtually undetectable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTake off and put back on in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstructed of 5052 and 6061 aluminums\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2018-2021 Ford Mustang without performance pack \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShow off your Ford Mustang's beautiful bumper with a \u003cem data-mce-fragment=\"1\"\u003eSTO N SHO\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e quick release front license plate bracket!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNever get a ticket for not having a front license plate again! Simply \u003cstrong data-mce-fragment=\"1\"\u003eSTO\u003c\/strong\u003e your front license plate when you want to \u003cstrong data-mce-fragment=\"1\"\u003eSHO\u003c\/strong\u003e the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBig Mike’s Performance Parts’ \u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ is a patented two-piece quick release front license plate bracket consisting of a front license plate holder and a base mounting plate\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis Big Mike’s Performance Parts’ \u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ requires 1 hole to be drilled on the underside of the vehicle for installation. This hole is not visible, and in no way, detracts from the look of your car.\u003c\/span\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788301275275,"sku":"SNS135","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS135a_bracket_1w__15544.1519167849_57800d44-dfaa-4e9a-90c2-c760566bb884.jpg?v=1792262379"},{"product_id":"2018-2019-ford-mustang-gt-with-performance-pack-2","title":"2018-2021 Ford Mustang GT with Performance Pack 2","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNever requires holes to be drilled into the front of your bumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade to fit your car, which means the base plate is virtually undetectable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake off and put back on in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConstructed of 5052 and 6061 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2018-2021 Ford Mustang GT with Performance Pack 2\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eShow off your Ford Mustang GT with Performance Pack 2's beautiful bumper with a \u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e quick release front license plate!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Big Mike’s Performance Parts’ \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ requires no holes to be drilled on the underside of the vehicle for installation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever get a ticket for not having a front license plate again! Simply \u003cstrong\u003eSTO\u003c\/strong\u003e your front license plate when you want to \u003cstrong\u003eSHO\u003c\/strong\u003e the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBig Mike’s Performance Parts’ \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ is a patented two-piece quick release front license plate bracket consisting of a front license plate holder and a base mounting plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Actual bracket may vary from picture based on model\u003c\/span\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788301308043,"sku":"SNS135C","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS135a_bracket_1w__15544.1519167849_1b943f2a-cf9e-4209-965e-b0f57cc2e623.jpg?v=1792262380"},{"product_id":"2015-2017-ford-mustang-2-3l-gt-v6","title":"2015-2017 Ford Mustang 2.3L\/GT\/V6 front license plate bracket","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstructed of 5052 and 6061 aluminum\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e2015-2017 Ford Mustang V6, GT and ecoboost \u003c\/span\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNOTE: This bracket fits the 2015 Mustang with the 50th Anniversary\u003cstrong data-mce-fragment=\"1\"\u003e appearance package\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis Big Mike’s Performance Parts’ \u003cem data-mce-fragment=\"1\"\u003eSTO N SHO\u003c\/em\u003e™ requires no holes to be drilled on the underside of the vehicle for installation.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788301340811,"sku":"SNS62","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS135a_bracket_1w__15544.1519167849_9e23c59f-942d-4c5b-9a58-dcd929a84c04.jpg?v=1792262381"},{"product_id":"steeda-explorer-adjustable-rear-sway-bar-2011-2019","title":"Steeda Explorer Adjustable Rear Sway Bar (2011-2019)","description":"\u003cul\u003e\n \u003cli\u003eAdjustable stiffness\u003c\/li\u003e\n \u003cli\u003eImproves vehicle handling\u003c\/li\u003e\n \u003cli\u003eReduces understeer\u003c\/li\u003e\n \u003cli\u003eReduces body roll\u003c\/li\u003e\n \u003cli\u003eIncludes bushings and brackets\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003c!-- split --\u003e\n \u003cp\u003e\u003cspan\u003eSteeda has the track-proven sway bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package on the market. Steeda's Explorer Adjustable Rear Sway Bar for 2011-2019 Ford Explorer are in house designed and manufactured to allow for adjustable roll stiffness. This increase in stiffness improves vehicle handling performance by greatly reducing understeer and also reducing overall vehicle body roll. The adjustability of the kit allows for you to adjust to the situation you are in, whether that be daily driving or towing your favorite toy to the track (like our Steeda Silver Bullet). Steeda's rear sway bar is 1-1\/8\" solid in diameter versus 22mm for the stock rear bar. This gives an incremental stiffness increase of 110% to 175% more than the OE stabilizer bar. This Steeda sway bar kit includes replacement polyurethane bushings, bushing brackets and installation instructions.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788301373579,"sku":"555-1025","price":350.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/download_1_07d64e54-5fae-4786-971e-5fa50d14a0b9.jpg?v=1792262382"},{"product_id":"copy-of-s550-coyote-wheel-spacers-1-5-inch","title":"Ford Mustang S550\/S650\/Explorer 2015-2026 Coyote Wheel Spacers (1.5 inch) set of 2","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers \u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Refunds \u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"data-table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"first odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eHex\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eThickness\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e1.50 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eIncluded\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eType\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788301668491,"sku":"5450-5450-C14","price":114.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-c_1.jpg?v=1792262389"},{"product_id":"s550-coyote-wheel-spacers-1-inch","title":"Ford Mustang S550\/S650\/Explorer 2015-2026 Coyote Wheel Spacers (1 inch) set of 2","description":"\u003cul\u003e\n\u003cli\u003eHub centric Wheel Spacers with Wheel-Centric Lip, fit perfectly over your vehicle's hub to reduce vibration. Perfect for creating an aggressive stance or fixing minor clearance issues!\u003c\/li\u003e\n\u003cli\u003eHeavy Duty 6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eMove wheels further from the hub for a powerful stance and better handling characteristics whether you're on the track or off-road!\u003c\/li\u003e\n\u003cli\u003eDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance \u0026amp; allows for better handling characteristics\u003c\/li\u003e\n\u003cli\u003eTorque Spacers \u003c\/li\u003e\n\u003cli\u003eTorque Wheels \u003c\/li\u003e\n\u003cli\u003eNo Returns Or Refunds\u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"data-table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"first odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eHex\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e19mm (3\/4\") Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eVehicle Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eWheel Bolt Pattern\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e5 x 114.3mm (5 x 4.50)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eStud Thread\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eM14x1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eID (Vehicle Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eOD (Wheel Side)\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e70.50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eAdapter Diameter\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eThickness\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003e1.00 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eIncluded\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eOE Lug Bulge Acorn Lug Nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003cth class=\"label\"\u003eType\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eSingle Drill - Hub Centric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"even\"\u003e\n\u003cth class=\"label\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd class=\"data last\"\u003eEA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Coyote Accessories","offers":[{"title":"Default Title","offer_id":50788301701259,"sku":"5450-5450-A14","price":87.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5450h-a_1.jpg?v=1792262390"},{"product_id":"steeda-focus-cold-air-intake-08-11-all","title":"Steeda Focus Cold Air Intake (08-11 All)","description":"\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n \u003cul\u003e\n \u003cli\u003eDoes not get heat soaked like factory air box\u003c\/li\u003e\n \u003cli\u003eCools to ambient temperature range significantly faster than the stock unit while producing more power\u003c\/li\u003e\n \u003cli\u003eImpressive horsepower and torque gains\u003c\/li\u003e\n \u003cli\u003eCost effective induction solution\u003c\/li\u003e\n \u003cli\u003eEasy to install\u003c\/li\u003e\n \u003cli\u003eSteeda has been building Cold Air Intakes for Ford performance vehicles longer than any other company!\u003c\/li\u003e\n \u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788301766795,"sku":"555-3143","price":125.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/sda-555-3143_w.jpg?v=1792262392"},{"product_id":"mustang-billet-aluminum-vertical-links-polyurethane-bushings","title":"Mustang Billet Aluminum Vertical Links Polyurethane bushings","description":"\u003cul\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eInstalls easily, with basic hand tools\u003c\/li\u003e\n\u003cli\u003eProvides better handling characteristics\u003c\/li\u003e\n\u003cli\u003eWill not flex under load\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThese Steeda S550 Mustang Billet Aluminum Vertical Links for 2015-2016 Mustang GT, EcoBoost, and V6 are made from 6061, aircraft grade aluminum. They feature CNC machined delrin bushings, and billet steel bushing sleeves and spacers, providing less deflection than the rubber bushings in the stock vertical links, yet does not add any NVH. These Steeda S550 Mustang Billet Aluminum Vertical Links for 2015-2016 Mustang GT, EcoBoost, and V6 will not flex under load like the stock links, and will give a better feel of the rear suspension, which helps the rest of the suspension assembly perform as it should.\u003c\/p\u003e\n\u003cp\u003eThe Install for Steeda's S550 Mustang Billet Aluminum Vertical Links for 2015-2016 Mustang GT, EcoBoost, and V6 is simple, and includes all necessary hardware.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788302454923,"sku":"555-4129","price":377.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/749549639_555-4121-1_e072785a-965b-426b-8a77-a22fd2f1804c.jpg?v=1792262407"},{"product_id":"mustang-v8-lowering-coil-springs-79-04","title":"Mustang V8 Lowering Coil Springs (79-04)","description":"\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eImproves Handling and Appearance\u003c\/li\u003e\n\u003cli\u003eLowers Front and Rear Approximately 1.5\"\u003c\/li\u003e\n\u003cli\u003eRetains Good Ride Quality, Making them Great for Street Driving\u003c\/li\u003e\n\u003cli\u003eClears Stock \u0026amp; Many Aftermarket Wheels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cb\u003eIncreases Handling Performance\u003c\/b\u003e\u003cbr\u003eBBK progressive rate 1979-2004 Mustang lowering springs are specifically designed to improve handling while retaining a comfortable, street friendly ride. These springs will lower your Mustang approximately 1.50\", improving performance and adding an aggressive stance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003cbr\u003eThe BBK Mustang lowering kit includes two front and two rear springs and can be installed with basic tools by most home mechanics. For best results we recommend the use of BBK caster camber plates to correct alignment for proper handling and to prevent premature tire wear.\u003c\/p\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BBK Performance","offers":[{"title":"Default Title","offer_id":50788303044747,"sku":"2501","price":339.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/2501_1.jpg?v=1792262412"},{"product_id":"steeda-s550-mustang-gt-5-0l-coyote-304-stainless-resonator-delete-h-pipe-2018-2020","title":"Steeda S550\/S650 Mustang GT 5.0L Coyote 304 Stainless Resonator Delete H-Pipe (2018-2026)","description":"\u003cul\u003e\n\u003cli\u003eImproves low-end torque over factory resonator\u003c\/li\u003e\n\u003cli\u003eTraditional deep muscle car exhaust note\u003c\/li\u003e\n\u003cli\u003e304SS will not rust like inferior 409SS or aluminized steel pipes\u003c\/li\u003e\n\u003cli\u003eSheds up to 6.5 lbs. weight\u003c\/li\u003e\n\u003cli\u003eDoes not require tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOur 304-Stainless Steel Resonator Delete H-Pipe for your iconic American made 5.0L Coyote Mustang GT is the best way to improve sound and increase performance at minimal cost while losing up to 6.5 pounds of weight. The H design increases torque at lower RPM and delivers a traditional mean deep muscle car exhaust tone.\u003c\/p\u003e\n\u003cp\u003eWith mandrel bent 2.5\" diameter tubing, the H-pipe easily installs between the factory catalytic converters and the factory mufflers. It is also compatible with virtually all aftermarket axle back exhaust kits. The 304 stainless steel mandrel bent tubing will not develop surface rust typical with 409 stainless or rust completely through like aluminized mild steel. The flush fit exhaust clamps allow for shortening the H-pipe if needed and prevent exhaust leaks common with expanded end kits.\u003c\/p\u003e\n\u003cp\u003eApplications: 2018-2026 Mustang GT 5.0L Ti-VCT DOHC 32V\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788304879755,"sku":"555-3619","price":412.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-3611_5dd7d964-06c2-4d5b-8b5c-7e6e0df2c657.jpg?v=1792262435"},{"product_id":"s550-mustang-stop-the-hop-starter-kit","title":"Steeda Mustang 'Stop the Hop' Street Starter Kit (2015-2026)","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop while also staying on a tight budget. This is where the Stop the Hop Starter Kit comes in. Our team of engineers got together and came up with the best 3 parts for eliminating unwanted wheel hop in the new S550\/S650 Mustang. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the Mustang chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.steeda.com\/which-stop-the-hop-is-best-for-you\" target=\"_blank\"\u003eWhich \"Stop the Hop\" Kit is for you?\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003cbr\u003e\u003cbr\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of it's kind in the performance aftermarket and so innovative and popular we patented it's design! Made in house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. It's job is to prevent up and down movements of the subframe.\u003cbr\u003e\u003cbr\u003eThe 3rd and final piece to this kit is the strongest support brace for the S550\/S650 IRS on the market!! Made in house from chrome moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt in design this brace ties the subframe to the chassis in the best possible way.\u003cbr\u003e\u003cbr\u003eThe best part about this kit, is the price. These 3 parts were the first of their kind for the S550 Mustang and nothing will prevent unwanted subframe movement or wheel hop better than this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Steeda IRS Subframe support braces will not fit convertible\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-rear-irs-subframe-brace-2015-coupe-555-5754.html\"\u003e\u003cstrong\u003e555-5754\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-sub-frame-bushing-support-system-2015-555-4437.html\"\u003e\u003cstrong\u003e555-4437\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438.html\"\u003e\u003cstrong\u003e555-4438\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEliminate wheel hop while not increasing NVH\u003c\/li\u003e\n\u003cli\u003eEliminate subframe movement\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003cli\u003eSquares subframe to the chassis\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFind out\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.steeda.com\/which-stop-the-hop-is-best-for-you\" target=\"_blank\"\u003ewhich Stop The Hop Kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eis best for you!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"670\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/CD0WiPBCY5g\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788306616459,"sku":"555-4455","price":807.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/stopthehop.jpg?v=1792262447"},{"product_id":"steeda-s550-mustang-adjustable-bumpstop-kit-2015-2020","title":"Steeda S550\/S650 Mustang Adjustable Bumpstop Kit (2015-2024)","description":"\u003cul\u003e\n \u003cli\u003ePrevents damage and fatigue to the shocks\u003c\/li\u003e\n \u003cli\u003eAdaptable for various vehicle ride heights\u003c\/li\u003e\n \u003cli\u003eDirect replacement of stock components\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003cp\u003eThese bumpstops are made from high-impact polyurethane which makes them stiffer than factory and prevent damage to the shocks, and other suspension components. The adjustable feature gives the customer the ability to use the kit on a stock or lowered ride height vehicle. This means no trimming of the factory bumpstops in order to maintain a safe and quality ride on lowered vehicles.\u003c\/p\u003e\n \u003cp\u003eWorks with all stock shocks and struts EXCEPT GT350 MagnaRide (NOTE: The shocks on the Performance Pack (PP) models has a smaller diameter shaft. Our bumpstops will work, but they will not fit as tight.) Retains stock boots.\u003c\/p\u003e\n \u003cp\u003eFor Steeda Springs 555-8208, 555-8209. 555-8210, and 555-8212 : Both are to be used at SHORT height\u003c\/p\u003e\n \u003cp\u003eFor Steeda Springs 555-8214,555-8222, 555-8211, and 555-8213 : Both are to be used at SHORT height\u003c\/p\u003e\n \u003cp\u003eFits ALL Steeda and Koni shocks and struts. Vogtland, KW, and Roush Front will work, rears are under testing.\u003c\/p\u003e\n \u003cp\u003e\u003ciframe width=\"670\" height=\"300\" src=\"https:\/\/www.youtube.com\/embed\/-vF5RK9djUM\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788306845835,"sku":"555-4445","price":96.48,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-4445.jpg?v=1792262451"},{"product_id":"steeda-focus-st-rs-clutch-spring-assist-and-spring-perch-kit","title":"Steeda Focus ST\/RS Clutch Spring Assist and Spring Perch Kit","description":"\u003cul\u003e\n\u003cli\u003eImprove clutch pedal engagement feel\u003c\/li\u003e\n\u003cli\u003eConsistent spring rate and minimal sag even after repeated use\u003c\/li\u003e\n\u003cli\u003eMore linear clutch feel\u003c\/li\u003e\n\u003cli\u003eAvoid slave cylinder damage due to removal of stock clutch spring\u003c\/li\u003e\n\u003cli\u003ePiano wire construction with high tensile strength and high elastic qualities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/V6Jd79HYSGE\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThe OE high-rate spring in your Focus ST or RS is what causes such a vague and disconnected clutch pedal feel. The spring causes a non-linear and confusing pedal feel, making it difficult to modulate the clutch on your Focus ST or RS. Many Focus owners have found that taking out the stock OE spring will give you somewhat similar results, but most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By eliminating the clutch spring, your clutch pedal will never fully return to stock position and over time your slave cylinder may begin leaking due to constant pressure on its seals. But don't worry! Steeda has your back. Our Steeda Focus ST\/RS Clutch Spring Kit completely replaces the factory spring and is honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in your Focus. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. The Steeda Focus Clutch Spring Kit allows you to feel exactly when clutch engages and disengages, making shifting a breeze.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788308025483,"sku":"555-7031","price":131.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/perch1.jpg?v=1792262468"},{"product_id":"steeda-s550-mustang-magneride-sport-lowering-springs-2015-2022","title":"Steeda S550\/S650 Mustang MagneRide Sport Lowering Springs (2015-2024)","description":"\u003cul\u003e\n\u003cli\u003eLowers your 2015-2024 Mustang 1\" on all 4 corners\u003c\/li\u003e\n\u003cli\u003eGreat ride quality, improved aerodynamics and improved vehicle stance\u003c\/li\u003e\n\u003cli\u003eSharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive\u003c\/li\u003e\n\u003cli\u003eFits coupe and convertible\u003c\/li\u003e\n\u003cli\u003eComes with a LIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e \u003cspan\u003eSprings are the foundation of good handling and ride quality. So start with the best springs for your 2015-2022 Mustang, built by the company that specializes in vehicle dynamics and your Mustang!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOur experience and expertise in high-performance street and racing suspension systems is second to none - Put that experience to work for you. Steeda springs are all in-house engineered and custom made to our exact specifications.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThey optimize the center of gravity and suspension geometry creating a huge improvement in handling with a noticeable reduction in nose-dive, launch squat, and body roll, while still maintaining an outstanding ride quality for daily driving. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSteeda springs provide the best combination of handling and ride quality available! \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e *Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788312219787,"sku":"555-8242","price":473.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/thumbnail_3.jpg?v=1792262503"},{"product_id":"steeda-s550-subframe-alignment-and-support-kit-2015-2019","title":"Steeda S550\/S650 Subframe Alignment and Support kit (2015-2024)","description":"\u003cul\u003e\n\u003cli\u003eOur IRS Subframe Bushing Support system fills in all factory voids in order to eliminate movement of the IRS subframe\u003c\/li\u003e\n\u003cli\u003eUtilizes all 4 factory mounting locations, which completely restricts shifting or rotation (Competitors only support 2 locations)\u003c\/li\u003e\n\u003cli\u003ePractically no added weight to the vehicle\u003c\/li\u003e\n\u003cli\u003eUses precision machined Delrin sleeves which adds no NVH and limits vibration to the vehicle\u003c\/li\u003e\n\u003cli\u003eCNC Machined parts for a precision fit unlike welded and stamped parts with slotted holes\u003c\/li\u003e\n\u003cli\u003eAligns AND holds the subframe in place, in all 4 mounting locations\u003c\/li\u003e\n\u003cli\u003eEasy installation, can be done in under 2 hours\u003c\/li\u003e\n\u003cli\u003eMore cost effective than others on the market to control wheel hop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eWe combined our ever so popular\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/s550-irs-subframe-aligment-kit-555-4438\"\u003e555 4438\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-irs-subframe-bushing-support-system-555-4437\"\u003e555 4437\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ekits into a money savings combo kit where you the customer benefits! The S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1\/2\" left to right. The Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other, preventing corrosion. Delrin is also less weight than aluminum or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory therefore eliminating any movement. Our Steeda S550 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary subframe alignments.\u003c\/p\u003e\n\u003cp\u003eThese Steeda S550 Mustang IRS Subframe Bushing Support System for your 2015-2017 Mustang GT, EcoBoost, and V6 gives the rear end a much more solid feel with no increase in NVH at all. The Steeda IRS Subframe bushings eliminate rear subframe movement notorious in the 2015-2019 Mustang GT, EcoBoost, and V6. A stiffened subframe allows the car to increase traction to the rear wheels and is the first step towards eliminating wheel hop. The Steeda S550 Mustang IRS Subframe Bushing Support System for your 2015-2019 Mustang GT, EcoBoost, and V6 are easy to install, with basic hand tools. The Steeda IRS bushing kit also does not require any permanent modifications to the car.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788312547467,"sku":"555-4450","price":368.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/thumbnail_1_d3e28f3d-e119-4d6e-ad17-7f7f4296677f.jpg?v=1792262511"},{"product_id":"2018-2019-ford-mustang-gt-with-performance-pack-2019-bullitt-2019-ca-special-sns135a","title":"2018-2023 Ford Mustang GT with Performance Pack\/2019-2021 Bullitt\/2019-2023 CA Special","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eShow off your Ford Mustang's beautiful bumper with a \u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e quick release front license plate!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNever get a ticket for not having a front license plate again! Simply \u003cstrong\u003eSTO\u003c\/strong\u003e your front license plate when you want to \u003cstrong\u003eSHO\u003c\/strong\u003e the beauty of your modern muscle, high performance or luxury car. Then slip your license plate back on when you're ready to roll.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBig Mike’s Performance Parts’ \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ is a patented two-piece quick release front license plate bracket consisting of a front license plate holder and a base mounting plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eNever requires holes to be drilled into the front of your bumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade to fit your car, which means the base plate is virtually undetectable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTake off and put back on in seconds\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan\u003e™\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e quick release front license plate bracket is manufactured in the USA using quality materials and parts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eConstructed of 5052 and 6061 aluminums\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWelded and anodized black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBuilt to last and comes with a limited life time warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis Big Mike’s Performance Parts’ \u003cstrong\u003e\u003cem\u003eSTO N SHO\u003c\/em\u003e\u003c\/strong\u003e™ requires 1 hole to be drilled on the underside of the vehicle for installation. This hole is not visible, and in no way, detract from the look of your car.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2018-2023 Ford Mustang GT with \u003cstrong\u003eperformance pack ONLY\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2019-2021 Ford Mustang Bullitt\u003c\/li\u003e\n\u003cli\u003e2019-2023 Ford Mustang California Special \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll parts required for installation included, however, tools are required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Actual bracket may vary from picture based on model\u003c\/span\u003e\u003c\/p\u003e","brand":"Sto n Sho","offers":[{"title":"Default Title","offer_id":50788312776843,"sku":"SNS135A","price":127.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SNS135a_bracket_1w__15544.1519167849.jpg?v=1792262516"},{"product_id":"steeda-s550-mustang-magneride-dual-rate-ultimate-handling-lowering-springs-2015-2022","title":"Steeda S550\/S650 Mustang MagneRide Dual Rate Ultimate Handling Lowering Springs (2015-2024)","description":"\u003cul\u003e\n\u003cli\u003eLowers the vehicle .750\" at all 4 corners\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but maintains outstanding street-able ride\u003c\/li\u003e\n\u003cli\u003eHighest spring rate for dramatic improvement in handling and reduction of nosedive\u003c\/li\u003e\n\u003cli\u003eSteeda collaborates with the best motorsport spring engineers in the industry to provide you the best products possible\u003c\/li\u003e\n\u003cli\u003eSteeda springs are developed using advanced proprietary CAD data, and our exclusive 3D modeling setting us apart from the others\u003c\/li\u003e\n\u003cli\u003eRace-proven in NASA and SCCA events\u003c\/li\u003e\n\u003cli\u003eLIFETIME warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eAre you looking for competition-proven handling performance for your 2015-2022 S550 Ford Mustang while still maintaining street drivability? Our Steeda Dual Rate Ultimate Handling Springs are now available for your MagneRide equipped S550 Mustang! Our experience and expertise in high-performance street and racing suspension systems is second to none, and the team here at Steeda has put that experience to work for you. Designed for ALL street and road racing applications, Steeda's Competition springs have the highest rates on the market but still maintain a comfortable and enjoyable ride when put on the street.\u003c\/p\u003e\n\u003cp\u003eCompetition-proven in both NASA and SCCA events, these springs greatly reduce nosedive and keep body roll to a minimum for the ultimate in performance handling. By lowering your S550 Mustang .750\" all around, these springs provide an optimized center of gravity and an aggressive stance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788313006219,"sku":"555-8243","price":614.03,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8243.jpg?v=1792262522"}],"url":"https:\/\/www.steeda.ca\/collections\/black-friday-deals.oembed?page=4","provider":"Steeda Canada","version":"1.0","type":"link"}