{"title":"Large Item Shipping","description":null,"products":[{"product_id":"borla-explorer-st-s-type-cat-back-exhaust-black-chrome-tips-2020-2021-explorer","title":"Borla S-Type - 2020-2026 Ford Explorer ST\/ 2020-2026 Lincoln Aviator Cat-Back Exhaust System - Black Tips","description":"\u003cp\u003eGive your 3.0L twin-turbo V6 a fuller, sportier exhaust note with the \u003cstrong\u003eBorla 140820BC S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The true-dual layout brings out a deeper growl under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.25-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with two 4-inch black chrome tips. The bolt-on cat-back connects to the factory exhaust and keeps the original catalytic converters in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Ford Explorer ST and Lincoln Aviator with the 3.0L twin-turbo V6, AWD, and automatic transmission. Contact us to confirm Explorer Platinum 3.0L or RWD fitment before ordering.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit vehicles equipped with a gasoline particulate filter (GPF).\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Sporty Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e True-dual 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on cat-back that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788289020043,"sku":"140820BC","price":2549.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140821BC-main-1-large_fd6a0786-19d5-4755-a62d-37a5678d5294.jpg?v=1792262131"},{"product_id":"velgen-wheels-vf9-wheel-20x10-2005-2022","title":"2020+ Ford Explorer ST Velgen VF9 Wheel Set (Set of 4) - 22x10.5","description":"\u003cp\u003eIf you're a true enthusiast, you know that the first thing you need to do to make your ride stand out is to customize it, and the Velgen VF9 wheel is a wheel designed to meet the needs of those who want a multi-spoke wheel with a sleek design. The VF9 features a 9-spoke, split-spoke design with a slight concave to make for the perfect look on your ride. With this intricate design, you'll get unique styling and enough space to show off those big brake sets.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe concave of this wheel is offered in mild, medium, and super deep options to get your vehicle looking more aggressive than ever. This setup also allows you to pick and choose the perfect look for a front and rear set with a mild offset in the front while running a deeper concave in the rear. \u003c\/span\u003eThis wheel is finished off with a detail-oriented Velgen center cap that is color-matched to your specific wheel.\u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22x10.5\u003c\/td\u003e\n\u003ctd\u003e22x10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003ctd\u003e67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32lbs\u003c\/td\u003e\n\u003ctd\u003e32lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e875kg\u003c\/td\u003e\n\u003ctd\u003e875kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black","offer_id":50788290789515,"sku":"VFMesh92210.5GB1143070.5","price":4499.99,"currency_code":"CAD","in_stock":true},{"title":"Satin Black","offer_id":50788290822283,"sku":"VFMesh92210.5SB1143070.5","price":4499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/Velgen_VF9_SatinBlack_1_720x_88643820-b95f-495b-9f68-ad24ebcdfcca.webp?v=1794715066"},{"product_id":"velgen-wheels-vf9-wheel-20x11-2005-2022","title":"2015+ Ford Mustang Velgen VF9 Wheel Set (Set of 4) - 20x10\/20x11","description":"\u003cp\u003eIf you're a true enthusiast, you know that the first thing you need to do to make your ride stand out is to customize it, and the Velgen VF9 wheel is a wheel designed to meet the needs of those who want a multi-spoke wheel with a sleek design. The VF9 features a 9-spoke, split-spoke design with a slight concave to make for the perfect look on your ride. With this intricate design, you'll get unique styling and enough space to show off those big brake sets.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe concave of this wheel is offered in mild, medium, and super deep options to get your vehicle looking more aggressive than ever. This setup also allows you to pick and choose the perfect look for a front and rear set with a mild offset in the front while running a deeper concave in the rear. \u003c\/span\u003eThis wheel is finished off with a detail-oriented Velgen center cap that is color-matched. \u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20x10\u003c\/td\u003e\n\u003ctd\u003e20x11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26lbs\u003c\/td\u003e\n\u003ctd\u003e26lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black","offer_id":50788291018891,"sku":"VFMesh920102011GB114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Satin Black","offer_id":50788291051659,"sku":"VFMesh920102011SB114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Gunmetal","offer_id":50788291084427,"sku":"VFMesh92011GGM1145270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Bronze","offer_id":50788291117195,"sku":"VFMesh920102011GBRZ114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Silver","offer_id":50788291149963,"sku":"VFMesh920102011GS114345270.5","price":1082.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/pf-ccd0b155--velgenvf5glossblackmetallic1.jpg?v=1792262169"},{"product_id":"velgen-wheels-vf5-wheel-20x10-2005-2022","title":"2015+ Ford Mustang Velgen VF5 Wheel Set (Set of 4) - 19x10\/19x11","description":"\u003cp\u003eIf you're a true enthusiast, you understand the importance of customizing your ride to make it stand out, and the Velgen VF5 Lightweight Series wheels are the ultimate choice for enhancing style and appearance. The concave profile of the VF5 starts out mild and becomes more aggressive with the increase in wheel width.\u003c\/p\u003e\n\u003cp\u003eAs a predecessor to our popular VMB5 wheels, the Velgen VF5 wheels are a customer favorite in our Lightweight Series. While the overall framework closely resembles that of the VMB5, the spokes have been slimmed down and reconfigured to achieve a more aggressive look. Featuring a split-spoke design with a total of 10 slender spokes grouped in pairs, it exudes a sporty yet contemporary aesthetic. The stepped spokes follow a concave style, extending to the edge of the wheel face for a performance-oriented appearance. To add a finishing touch, the VF5 wheel comes complete with a meticulously crafted Velgen center cap, color-matched to your specific wheel.\u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19x10\u003c\/td\u003e\n\u003ctd\u003e19x11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25lbs\u003c\/td\u003e\n\u003ctd\u003e26.5 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black","offer_id":50788291379339,"sku":"VF519101911GB114345270.5","price":3349.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Gunmetal","offer_id":50788291444875,"sku":"VF51910GGM1143470.5","price":3349.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Silver","offer_id":50788291510411,"sku":"VF519101911GS1143470.5","price":3349.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/velgen-vf5-gloss-black-metallic_1_9d348b08-e99d-49a7-aed1-b36a5d9dd0a3.jpg?v=1792262171"},{"product_id":"velgen-wheels-classic5-v2-wheel-20x11-2005-2022","title":"2015+ Ford Mustang Velgen Wheel Classic5 V2 Wheel Set - 20X10 and 20x11","description":"\u003cp\u003eIf you're a Mustang enthusiast, you know that the first thing you need to do to make your ride stand out is to customize it, and the Velgen Classic5 V2 Lightweight Series wheels are the ideal choice to take the style and appearance to the next level! The concave on the \u003cspan\u003eClassic5 V2\u003c\/span\u003e starts out mild and gets more concave with the increase in wheel width.\u003c\/p\u003e\n\u003cp\u003eAs a predecessor to our popular \u003cspan\u003eClassic5 \u003c\/span\u003ewheels, the \u003cspan\u003eClassic5 V2\u003c\/span\u003e wheels are the popular choice in our Lightweight Series of wheels. The overall design of the \u003cspan\u003eClassic5 V2\u003c\/span\u003e closely resembles the original \u003cspan\u003eClassic5\u003c\/span\u003e framework, \u003cspan\u003ebut the spokes have been widened a bit and redesigned for a more aggressive look\u003c\/span\u003e. The\u003cspan\u003e Classic5 V2 still retains the tried and TRUE 5-spoke look, but instead of getting really thin at the edge of the wheel, we opted for the spoke to have a less aggressive taper to the edge of the wheel. \u003c\/span\u003eThis wheel is finished off with a detail-oriented Velgen center cap that is color-matched to your specific wheel.\u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20x10\u003c\/td\u003e\n\u003ctd\u003e20x11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e73.1\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26lbs\u003c\/td\u003e\n\u003ctd\u003e28lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black","offer_id":50788291870859,"sku":"VFC520102011GB114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Gunmetal","offer_id":50788291936395,"sku":"VFC520102011GGM114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Bronze","offer_id":50788291969163,"sku":"VFC520102011GBRZ114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Silver","offer_id":50788292001931,"sku":"VFC520102011GS114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/Velgen_Classic5_V2_GlossBlack_1_1800x1800_461dd75c-3ecb-4ba9-b3ea-62145085a83b.webp?v=1794701757"},{"product_id":"borla-explorer-st-atak-cat-back-exhaust-black-chrome-tips-2020-2021-explorer","title":"Borla ATAK - 2020-2026 Ford Explorer ST\/ 2020-2026 Lincoln Aviator Cat-Back Exhaust System","description":"\u003cp\u003eGive your 3.0L twin-turbo V6 a more aggressive exhaust note with the \u003cstrong\u003eBorla 140821BC ATAK Cat-Back Exhaust System\u003c\/strong\u003e. The true-dual layout pairs a front muffler with an internal H-pipe and ATAK rear mufflers for a bold growl under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.25-inch mandrel-bent T-304 stainless steel, the system finishes each side with two 4-inch black chrome tips. The direct bolt-on design connects to the factory exhaust and retains the original catalytic converters.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2020–2026 Ford Explorer ST and Lincoln Aviator 3.0L twin-turbo V6 AWD, automatic. Contact us to confirm Explorer Platinum 3.0L or RWD fitment before ordering.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit vehicles equipped with a gasoline particulate filter (GPF).\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Loud, aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e True-dual 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFront muffler:\u003c\/strong\u003e Integrated H-pipe for a fuller exhaust note\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on cat-back that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788297048203,"sku":"140821BC","price":2499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140821BC-main-1-large.jpg?v=1792262307"},{"product_id":"borla-fusion-sport-s-type-quad-tip-axle-back-exhaust-2-25-2017-2019","title":"Borla S-Type - 2017-2019 Ford Fusion Sport Axle-Back Exhaust System","description":"\u003cp\u003eBring out the sound of your twin-turbo Fusion Sport with the \u003cstrong\u003eBorla 11942 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. Borla’s Polyphonic Harmonizer pairs with S-Type mufflers to give the 2.7L V6 a fuller, sportier note under throttle without cabin drone on the highway.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, the system replaces the factory rear mufflers and finishes each side with two polished 3.5-inch tips. The quad-tip layout keeps the Fusion Sport’s signature look while giving the rear end a cleaner finish.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2017–2019 Ford Fusion Sport sedan, 2.7L twin-turbo V6, automatic transmission, AWD\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Full-bodied Borla S-Type tone with Polyphonic Harmonizer technology and no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing with a single inlet and dual outlets per muffler\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 3.5-inch round polished stainless steel tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788298621067,"sku":"11942","price":2099.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11942-main-1-large.jpg?v=1792262328"},{"product_id":"mustang-gt-boss-302-axle-back-exhaust-s-type-2011-2012","title":"Borla S-Type - 2011-2012 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your 5.0L Mustang with the \u003cstrong\u003eBorla 11789 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers deliver an aggressive note when you get on the throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.75-inch mandrel-bent T-304 stainless steel, the system finishes each side with a 4.5-inch bright chrome tip. The direct bolt-on design replaces the factory rear mufflers while leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2011–2012 Ford Mustang GT 5.0L V8 (coupe or convertible, automatic or manual) and 2012 Mustang Boss 302 5.0L V8 coupe\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.75-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on axle-back that reuses the factory exhaust clamps. No cutting or welding required.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to upgrade to a full cat-back later? Add the Borla 60513 X-Pipe and 60521 Mid-Pipes, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303634571,"sku":"11789","price":1599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11789_xlarge.jpg?v=1792262420"},{"product_id":"mustang-shelby-gt500-2013-2014-cat-back-exhaust-atak","title":"Borla ATAK - 2011-2012 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your 5.0L Mustang with the \u003cstrong\u003eBorla 11791 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. The ATAK mufflers give your GT or Boss 302 an aggressive V8 roar under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.75-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4.5-inch bright chrome tip. The left and right muffler assemblies replace the factory rear mufflers without cutting or welding, leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2011–2012 Ford Mustang GT 5.0L V8 (coupe or convertible, automatic or manual) and 2012 Mustang Boss 302 5.0L V8 coupe\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Loud, aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.75-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on axle-back that reuses the factory exhaust clamps. No cutting or welding required.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to turn it into a full cat-back? Add the Borla 60513 X-Pipe and 60521 Mid-Pipes, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303667339,"sku":"11791","price":1699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11791_xlarge.jpg?v=1792262421"},{"product_id":"mustang-gt-cat-back-exhaust-s-type-2018-2021","title":"Borla S-Type - 2018-2023 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eDrop the top and let your 5.0L V8 be heard with the \u003cstrong\u003eBorla 140807 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The included Merge X-Pipe and S-Type mufflers give your Mustang GT Convertible a deep, aggressive growl under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eThe dual 2.5-inch T-304 stainless steel system replaces the exhaust behind the factory catalytic converters. Two 4-inch bright chrome tips on each side give the rear valance a clean quad-exit finish.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2023 Ford Mustang GT Convertible 5.0L V8, automatic or manual, without factory Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.5-inch T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe and left and right S-Type muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003ePrefer a quieter setup? The optional Borla 60561 resonator, sold separately, replaces the included Merge X-Pipe for additional sound control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303700107,"sku":"140807","price":2349.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140745_xlarge_1_d52f61d6-06ae-46b3-888a-f15b93fff629.jpg?v=1792262422"},{"product_id":"mustang-gt-without-active-exhaust-valve-axle-back-exhaust-s-type-2018-2020","title":"Borla S-Type - 2018-2023 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your Mustang GT with the \u003cstrong\u003eBorla 11953 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. Tuned for the 5.0L, the S-Type mufflers deliver a more aggressive note under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from mandrel-bent T-304 stainless steel, this axle-back replaces the factory rear mufflers while keeping the factory resonator and catalytic converters in place. Four polished stainless steel tips give the rear end a clean quad-exit finish.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2023 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual, without factory Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Mandrel-bent T-304 stainless steel with 2.5-inch muffler inlets and 2.5-inch and 3-inch outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round polished stainless steel tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to upgrade to a full cat-back later? Add the Borla 60705 X-Pipe and Mid-Pipes kit, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303765643,"sku":"11953","price":1599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11953_xlarge_be3cad7d-4a10-4801-bba9-fa87b83f7a2d.jpg?v=1792262423"},{"product_id":"mustang-gt-with-active-exhaust-valve-2018-2020-axle-back-exhaust-s-type","title":"Borla S-Type - 2018-2023 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your Mustang without giving up your factory exhaust modes. The \u003cstrong\u003eBorla 11951 S-Type Axle-Back Exhaust System\u003c\/strong\u003e delivers a more aggressive note under throttle without cabin drone at cruising speeds. The valved mufflers reuse your factory actuators, so you can still select your exhaust mode from the driver’s seat.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from mandrel-bent T-304 stainless steel, this axle-back uses 2.5-inch piping into the mufflers and finishes each side with two 4-inch bright chrome tips. It replaces the factory rear mufflers while keeping the factory resonator and catalytic converters in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2023 Ford Mustang GT 5.0L V8 coupe or convertible, automatic or manual, and 2019–2020 Mustang Bullitt. Requires factory Active Valve Performance Exhaust.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Mandrel-bent T-304 stainless steel with 2.5-inch muffler inlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eActive exhaust:\u003c\/strong\u003e Included exhaust valves reuse the factory electronic actuators to retain selectable exhaust modes\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to upgrade to a full cat-back later? Add the Borla 60705 X-Pipe and Mid-Pipes kit, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303831179,"sku":"11951","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11953_xlarge.jpg?v=1792262425"},{"product_id":"mustang-gt-cat-back-exhaust-s-type-2018-2020","title":"Borla S-Type - 2018-2023 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your Mustang GT with the \u003cstrong\u003eBorla 140745 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The included Merge X-Pipe and S-Type mufflers give your 5.0L a more aggressive note when you get on the throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 3-inch mandrel-bent T-304 stainless steel, the system finishes each side with two 4-inch bright chrome tips. Use the included clamp-on adapters to connect to the factory exhaust. Leave the adapters out when connecting to full 3-inch inlets.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2023 Ford Mustang GT 5.0L V8 coupe, automatic or manual, without factory Active Valve Exhaust\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eConvertible note:\u003c\/strong\u003e Borla does not recommend this system for convertibles.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 3-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe, S-Type mufflers, and two adapters for the factory exhaust connection\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Clamp-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303863947,"sku":"140745","price":2799.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140745_xlarge_1.jpg?v=1792262426"},{"product_id":"mustang-gt-cat-back-exhaust-atak-2018-2020","title":"Borla ATAK - 2018-2023 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eTurn up the 5.0L’s V8 roar without giving up your factory exhaust modes. The \u003cstrong\u003eBorla 140743 ATAK Cat-Back Exhaust System\u003c\/strong\u003e pairs a Merge X-Pipe and Borla’s Polyphonic Harmonizer with valved ATAK mufflers for a full, aggressive note under throttle and no cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 3-inch mandrel-bent T-304 stainless steel, the system finishes each side with two 4-inch bright chrome tips. The included adapters connect the cat-back to the stock exhaust. If you’re connecting to full 3-inch inlets, install the system without the adapters.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2018–2023 Ford Mustang GT 5.0L V8 coupe, automatic or manual, including 2019–2020 Bullitt models. Requires factory Active Valve Performance Exhaust.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eConvertible note:\u003c\/strong\u003e Borla does not recommend this system for convertibles.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 3-inch mandrel-bent T-304 stainless steel tubing with a Merge X-Pipe and Polyphonic Harmonizer\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eActive exhaust:\u003c\/strong\u003e Included exhaust valves reuse the factory actuators to retain selectable exhaust modes\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Four 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Clamp-on cat-back that retains the factory catalytic converters. Two adapters are included for the stock connection.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788303962251,"sku":"140743","price":3599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140743_xlarge.jpg?v=1792262427"},{"product_id":"borla-stinger-s-type-axle-back-exhaust-1","title":"Borla S-Type - 2015-2023 Ford Mustang EcoBoost Axle-Back Exhaust System","description":"\u003cp\u003eGive your Mustang a deeper, sportier exhaust note with the \u003cstrong\u003eBorla 11889 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. Designed for the 2.3L EcoBoost and 3.7L V6, the S-Type mufflers bring out a stronger growl under throttle without cabin drone when cruising.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch bright chrome tip. It replaces the factory rear mufflers while leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2023 Ford Mustang 2.3L EcoBoost coupe and 2015–2017 Mustang 3.7L V6 coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit convertibles or models equipped with factory Active Valve Exhaust (quad tips)\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, sporty Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Left and right S-Type muffler assemblies and two clamps\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326113419,"sku":"11889","price":1399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11889.jpg?v=1792262770"},{"product_id":"borla-atak-axle-back-exhaust-1","title":"Borla ATAK - 2015-2023 Ford Mustang EcoBoost Axle-Back Exhaust System","description":"\u003cp\u003eDrop the top and turn up the volume with the \u003cstrong\u003eBorla 11939 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. Designed for EcoBoost and 3.7L V6 Mustang convertibles, the ATAK mufflers deliver a loud, aggressive exhaust note when you get on the throttle.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch bright chrome tip. It replaces the factory rear mufflers while leaving the rest of the exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2023 Ford Mustang EcoBoost 2.3L convertible and 2015–2017 Mustang 3.7L V6 convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit coupes or vehicles with factory Active Valve Exhaust (quad tips)\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Loud, aggressive Borla ATAK tone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326244491,"sku":"11939","price":1249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11939.jpg?v=1792262772"},{"product_id":"borla-atak-axle-back-exhaust","title":"Borla ATAK - 2015-2023 Ford Mustang EcoBoost Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your S550 Mustang with the \u003cstrong\u003eBorla 11890 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. Tuned for the 2.3L EcoBoost and 3.7L V6, the ATAK mufflers deliver a loud, aggressive note under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch bright chrome tip. It replaces the factory rear mufflers while leaving the rest of the exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2023 Ford Mustang EcoBoost 2.3L coupe and 2015–2017 Mustang 3.7L V6 coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit convertibles or models with factory Active Valve Exhaust (quad tips)\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Left and right ATAK muffler assemblies and two clamps\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326342795,"sku":"11890","price":1199.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11890.jpg?v=1792262772"},{"product_id":"borla-atak-2-5-in-axle-back-exhaust-black-tips","title":"Borla ATAK - 2015-2017 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your S550 Mustang GT with the \u003cstrong\u003eBorla 11895BC ATAK Axle-Back Exhaust System\u003c\/strong\u003e. The ATAK mufflers give your 5.0L an aggressive V8 roar under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.5-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch black chrome tip. It replaces the factory rear mufflers while keeping the factory resonator and catalytic converters in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Loud, aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to upgrade to a full cat-back later? Pair this axle-back with the Borla 60705 X-Pipe and Mid-Pipes kit, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326834315,"sku":"11895BC","price":1499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11895BC.jpg?v=1792262787"},{"product_id":"borla-stinger-s-type-2-5-in-axle-back-exhaust","title":"Borla S-Type - 2015-2017 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your S550 Mustang GT with the \u003cstrong\u003eBorla 11887 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers give your 5.0L a more aggressive note under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.5-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch bright chrome tip. It replaces the factory rear mufflers while keeping the factory resonator and catalytic converters in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on without welding.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to upgrade to a full cat-back later? Pair this axle-back with the Borla 60705 X-Pipe and Mid-Pipes kit, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326867083,"sku":"11887","price":1449.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11887.jpg?v=1792262787"},{"product_id":"borla-stinger-s-type-2-5-in-axle-back-exhaust-black-tips","title":"Borla S-Type - 2015-2017 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eGive your S550 Mustang GT a deeper V8 growl and a darker look with the \u003cstrong\u003eBorla 11887BC S-Type Axle-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers deliver an aggressive note when you get on the throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.5-inch mandrel-bent T-304 stainless steel, this axle-back finishes each side with a 4-inch black chrome tip. It replaces the factory rear mufflers while retaining the factory resonator and catalytic converters.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Cutting the factory exhaust pipes is required. The new mufflers clamp on with no welding required.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant a full cat-back later? Pair this axle-back with the Borla 60705 X-Pipe and Mid-Pipes kit, sold separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Use hot water and a microfiber cloth to clean the black chrome tips. Borla does not recommend its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788326899851,"sku":"11887BC","price":1499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11887BC.jpg?v=1792262789"},{"product_id":"borla-atak-cat-back-exhaust-1","title":"Borla ATAK - 2015-2020 Ford Mustang Shelby GT350 Cat-Back Exhaust System","description":"\u003cul\u003e\n\u003cli\u003eCompatible with Factory Multi-mode Exhaust\u003c\/li\u003e\n\u003cli\u003eStraight-Through ATAK Race Inspired Mufflers\u003c\/li\u003e\n\u003cli\u003eFree Flowing X-Pipe Assembly Included\u003c\/li\u003e\n\u003cli\u003eDurable 304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e2.75\" Mandrel-Bent Tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eWith over 30 years of experience, Borla is now a globally recognized brand that’s committed in providing world-class exhaust products which surpass the expectations of customers. Borla has pioneered a variety of improvements in the design of performance exhaust systems and hold several US patents for innovative exhaust system technology, and the company has won numerous \"Best New Product\" awards in the industry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788327981195,"sku":"140684","price":3499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140684.jpg?v=1792262822"},{"product_id":"borla-stinger-s-type-cat-back-exhaust-1","title":"Borla S-Type - 2015-2017 Ford Mustang V6 Cat-Back Exhaust System","description":"\u003cp\u003eGive your 3.7L Mustang a deeper, sportier exhaust note with the \u003cstrong\u003eBorla 140587 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The true-dual design pairs S-Type mufflers with a front resonator that houses an internal H-pipe, bringing out the V6’s growl when you get on the throttle.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, this system finishes each side with a 4-inch bright chrome tip. The bolt-on cat-back replaces the exhaust behind the catalytic converters, leaving the factory cats in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang 3.7L V6 coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eConvertible note:\u003c\/strong\u003e Borla recommends the 11938 axle-back instead of this system for convertibles.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, sporty Borla S-Type V6 tone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e True-dual 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eResonator:\u003c\/strong\u003e Front resonator with an internal H-pipe\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788328210571,"sku":"140587","price":2399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140587.jpg?v=1792262829"},{"product_id":"borla-atak-cat-back-exhaust","title":"Borla ATAK - 2015-2023 Ford Mustang EcoBoost Cat-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your 2.3L EcoBoost Mustang with the \u003cstrong\u003eBorla 140585 ATAK Cat-Back Exhaust System\u003c\/strong\u003e. Borla’s most aggressive sound level gives your turbocharged Mustang a louder, sharper exhaust note under boost without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel tubing, this cat-back finishes each side with a 4-inch bright chrome tip. The bolt-on design replaces the exhaust behind the factory catalytic converter, leaving the converter in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2023 Ford Mustang EcoBoost 2.3L turbo coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit convertibles or models equipped with factory Active Valve Exhaust (quad tips)\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Loud, aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back that retains the factory catalytic converter and reuses the front factory clamp\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788328833163,"sku":"140585","price":1999.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140585.jpg?v=1792262844"},{"product_id":"borla-stinger-s-type-cat-back-exhaust","title":"Borla S-Type - 2015-2023 Ford Mustang EcoBoost Cat-Back Exhaust System","description":"\u003cp\u003eGive your 2.3L EcoBoost Mustang a deeper, sportier exhaust note with the \u003cstrong\u003eBorla 140584 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers bring out a more aggressive tone under boost without cabin drone at highway speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with a 4-inch bright chrome tip. The bolt-on cat-back replaces the exhaust behind the factory catalytic converter, leaving the converter in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2023 Ford Mustang EcoBoost 2.3L turbo coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eExclusions:\u003c\/strong\u003e Does not fit convertibles or models equipped with factory Active Valve Exhaust (quad tips)\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, sporty Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converter\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788328865931,"sku":"140584","price":2249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140584.jpg?v=1792262845"},{"product_id":"borla-touring-2-5-in-cat-back-exhaust-black-tips","title":"Borla Touring - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Convertible only\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eWith over 30 years of experience, Borla is now a globally recognized brand that’s committed in providing world-class exhaust products which surpass the expectations of customers. Borla has pioneered a variety of improvements in the design of performance exhaust systems and hold several US patents for innovative exhaust system technology, and the company has won numerous \"Best New Product\" awards in the industry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329291915,"sku":"140589BC","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140589BC.jpg?v=1792262856"},{"product_id":"borla-touring-2-5-in-cat-back-exhaust-chromed-tips","title":"Borla Touring - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eGive your S550 Mustang GT a deeper V8 rumble without making every drive loud. The \u003cstrong\u003eBorla 140589 Touring Cat-Back Exhaust System\u003c\/strong\u003e pairs Touring mufflers with a front resonator that houses an internal H-pipe. It brings out the 5.0L’s sound with a mellower tone than Borla’s S-Type or ATAK options.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.5-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with a 4-inch bright chrome tip. The bolt-on cat-back retains the factory catalytic converters and reuses the factory front band clamps.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, mellow Borla Touring V8 tone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Front resonator with internal H-pipe, over-axle pipes, left and right Touring muffler assemblies, and four stainless steel clamps\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329324683,"sku":"140589","price":2399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140589.jpg?v=1792262857"},{"product_id":"borla-atak-cat-back-exhaust-w-black-chrome-tips","title":"Borla ATAK - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your modified 5.0L Mustang GT with the \u003cstrong\u003eBorla 140630BC ATAK Cat-Back Exhaust System\u003c\/strong\u003e. The included Merge X-Pipe and ATAK mufflers deliver an aggressive V8 roar under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 3-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with a 4-inch black chrome tip. Use the included clamp-on adapters to connect to the factory exhaust. Leave the adapters out when connecting to full 3-inch inlets.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8 coupe, automatic or manual. Does not fit convertibles.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 3-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe, left and right ATAK muffler assemblies, and two adapters for the factory exhaust connection\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e Substantially modified engines that require a 3-inch exhaust\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329357451,"sku":"140630BC","price":2699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140630BC.jpg?v=1792262858"},{"product_id":"borla-atak-2-5-in-cat-back-exhaust-black-tips","title":"Borla ATAK - 2015-2017 Ford Mustang GT Cat-Back Exhaust System - Black Tips","description":"\u003cp\u003eGive your S550 Mustang GT an aggressive V8 roar with the \u003cstrong\u003eBorla 140591BC ATAK Cat-Back Exhaust System\u003c\/strong\u003e. The ATAK mufflers and included Merge X-Pipe bring out the 5.0L’s sound under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.5-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with a 4-inch black chrome tip. The bolt-on design replaces the exhaust behind the factory catalytic converters, keeping the original cats in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe, over-axle pipes, and left and right ATAK muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to dial back the volume? The optional Borla 60561 resonator (sold separately) replaces the included Merge X-Pipe for additional sound control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329422987,"sku":"140591BC","price":2399.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140591BC.jpg?v=1792262860"},{"product_id":"borla-atak-2-5-in-cat-back-exhaust","title":"Borla ATAK - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eGive your S550 Mustang GT an aggressive V8 roar with the \u003cstrong\u003eBorla 140591 ATAK Cat-Back Exhaust System\u003c\/strong\u003e. The ATAK mufflers and included Merge X-Pipe bring out the 5.0L’s sound when you get on the throttle, without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.5-inch mandrel-bent T-304 stainless steel tubing, the system finishes each side with a 4-inch bright chrome tip. The bolt-on design replaces the exhaust behind the factory catalytic converters, keeping the original cats in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe, left and right over-axle pipes, ATAK muffler assemblies, and four stainless steel clamps\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant to dial back the volume? The optional Borla 60561 resonator (sold separately) replaces the included Merge X-Pipe for additional sound control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329488523,"sku":"140591","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140591.jpg?v=1792262861"},{"product_id":"borla-stinger-s-type-3-in-cat-back-exhaust-black-tip","title":"Borla S-Type - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eGive your modified 5.0L Mustang GT a deeper V8 growl with the \u003cstrong\u003eBorla 140629BC S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The dual 3-inch tubing, included Merge X-Pipe, and S-Type mufflers deliver an aggressive note under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from mandrel-bent T-304 stainless steel, the system finishes each side with a 4-inch black chrome tip. The included adapters let you clamp the cat-back to the factory exhaust connection. Leave the adapters out when connecting to full 3-inch inlets.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8 coupe, automatic or manual. Does not fit convertibles.\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 3-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe, left and right S-Type muffler assemblies, and two adapters for the factory exhaust connection\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round black chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e Substantially modified engines that require a 3-inch exhaust\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eTip care: Clean the black chrome tips with hot water and a microfiber cloth. Borla does not recommend using its stainless steel polish on this finish.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329554059,"sku":"140629BC","price":2699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140629BC.jpg?v=1792262862"},{"product_id":"borla-stinger-s-type-2-5in-cat-back-exhaust-black-tips","title":"Borla S-Type - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Convertible only\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eWith over 30 years of experience, Borla is now a globally recognized brand that’s committed in providing world-class exhaust products which surpass the expectations of customers. Borla has pioneered a variety of improvements in the design of performance exhaust systems and hold several US patents for innovative exhaust system technology, and the company has won numerous \"Best New Product\" awards in the industry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788329619595,"sku":"140590BC","price":2199.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/140590BC.jpg?v=1792262865"},{"product_id":"touring-cat-back-exhaust-system-chrome-m-5200-m8tc","title":"Ford Racing 2015 Mustang 5.0L Touring Cat-Back Exhaust System Chrome","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to stock catalytic converters\u003c\/li\u003e\n\u003cli\u003e30 lbs lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eIntegral X-pipe\u003c\/li\u003e\n\u003cli\u003e2.5\" stainless steel mandrel bent cat-back tubing\u003c\/li\u003e\n\u003cli\u003e4\" chrome-plated stainless steel tip\u003c\/li\u003e\n\u003cli\u003eUses stock hangers and mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eFord Racing has partnered with industry leader Borla® Exhaust to offer the first in a series of Ford Racing by Borla® systems for the new 2015 Mustang. This cat-back system is constructed from ultra-smooth mandrel bent 300-series stainless steel tubing that is designed and fit to Ford Racing specs.\u003c\/p\u003e\n\u003cp\u003eThis 2.5\" cat-back exhaust system will give you an aggressive muscle car sound. This cat-back exhaust system with integral X-pipe bolts directly to the stock factory catalytic converters, making your Mustang 100% emission compliant. These tuned stainless steel mufflers with 4\" chrome-plated stainless steel tips not only sound great but look great too.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":50788348493963,"sku":"M-5200-M8TC","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/451231410_M-5200-M8SC_20_1.jpg?v=1792263324"},{"product_id":"touring-cat-back-exhaust-system-black-chrome-m-5200-m8tb","title":"Ford Racing 2015 Mustang 5.0L Touring Cat-Back Exhaust System Black Chrome","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to stock catalytic converters\u003c\/li\u003e\n\u003cli\u003e30 lbs lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eIntegral X-pipe\u003c\/li\u003e\n\u003cli\u003e4\" Black chrome-plated stainless steel tip\u003c\/li\u003e\n\u003cli\u003eUses stock hangers and mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eFord Racing has partnered with industry leader Borla® Exhaust to offer the first in a series of Ford Racing by Borla® systems for the new 2015 Mustang. This cat-back system is constructed from ultra-smooth mandrel bent 300-series stainless steel tubing that is designed and fit to Ford Racing specs.\u003c\/p\u003e\n\u003cp\u003eThis 2.5\" cat-back exhaust system will give you an aggressive muscle car sound. This cat-back exhaust system with integral X-pipe bolts directly to the stock factory catalytic converters, making your Mustang 100% emission compliant. These tuned stainless steel mufflers with 4\" chrome-plated stainless steel tips not only sound great but look great too.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":50788348526731,"sku":"M-5200-M8TB","price":2699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/451231410_M-5200-M8SB_20_1.jpg?v=1792263326"},{"product_id":"sport-cat-back-exhaust-system-chrome-m-5200-m8sc","title":"Ford Racing 2015 Mustang 5.0L Sport Cat-Back Exhaust System Chrome","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to stock catalytic converters\u003c\/li\u003e\n\u003cli\u003e30 lbs lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eIntegral X-pipe\u003c\/li\u003e\n\u003cli\u003e2.5\" stainless steel mandrel bent cat-back tubing\u003c\/li\u003e\n\u003cli\u003e4\" chrome-plated stainless steel tip\u003c\/li\u003e\n\u003cli\u003eUses stock hangers and mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eFord Racing has partnered with industry leader Borla® Exhaust to offer the first in a series of Ford Racing by Borla® systems for the new 2015 Mustang. This cat-back system is constructed from ultra-smooth mandrel bent 300-series stainless steel tubing that is designed and fit to Ford Racing specs.\u003c\/p\u003e\n\u003cp\u003eThis 2.5\" cat-back exhaust system will give you an aggressive muscle car sound. This cat-back exhaust system with integral X-pipe bolts directly to the stock factory catalytic converters, making your Mustang 100% emission compliant. These tuned stainless steel mufflers with 4\" chrome-plated stainless steel tips not only sound great but look great too.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":50788348559499,"sku":"M-5200-M8SC","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/451231410_M-5200-M8SC.jpg?v=1792263326"},{"product_id":"sport-cat-back-exhaust-system-black-chrome-m-5200-m8sb","title":"Ford Racing 2015 Mustang 5.0L Sport Cat-Back Exhaust System Black Chrome","description":"\u003cp\u003e\u003cstrong\u003eSPECIAL ORDER \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBolts to stock catalytic converters\u003c\/li\u003e\n\u003cli\u003e30 lbs lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eIntegral X-pipe\u003c\/li\u003e\n\u003cli\u003e2.5\" stainless steel mandrel bent cat-back tubing\u003c\/li\u003e\n\u003cli\u003e4\" Black chrome-plated stainless steel tip\u003c\/li\u003e\n\u003cli\u003eUses stock hangers and mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eFord Racing has partnered with industry leader Borla® Exhaust to offer the first in a series of Ford Racing by Borla® systems for the new 2015 Mustang. This cat-back system is constructed from ultra-smooth mandrel bent 300-series stainless steel tubing that is designed and fit to Ford Racing specs.\u003c\/p\u003e\n\u003cp\u003eThis 2.5\" cat-back exhaust system will give you an aggressive muscle car sound. This cat-back exhaust system with integral X-pipe bolts directly to the stock factory catalytic converters, making your Mustang 100% emission compliant. These tuned stainless steel mufflers with 4\" chrome-plated stainless steel tips not only sound great but look great too.\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e*Large\/heavy box, may require additional shipping cost*\u003c\/span\u003e\u003c\/p\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":50788348592267,"sku":"M-5200-M8SB","price":2599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/451231410_M-5200-M8SB.jpg?v=1792263328"},{"product_id":"s-type-cat-back-exhaust-system-140590","title":"Borla S-Type - 2015-2017 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eGive your S550 Mustang GT a deeper V8 growl with the \u003cstrong\u003eBorla 140590 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers and included Merge X-Pipe bring out an aggressive exhaust note when you get on the throttle without adding cabin drone on the highway.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from dual 2.5-inch mandrel-bent T-304 stainless steel tubing, this system finishes each side with a 4-inch bright chrome tip. The bolt-on design replaces the exhaust behind the factory catalytic converters and reuses the original front band clamps.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2015–2017 Ford Mustang GT 5.0L V8, coupe or convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Borla Merge X-Pipe and left and right S-Type mufflers\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWant a quieter setup? The optional Borla 60561 resonator (sold separately) replaces the included X-Pipe for additional sound control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788393549963,"sku":"140590","price":2199.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_140590_xlarge.jpg?v=1792264350"},{"product_id":"stinger-stainless-steel-agressive-catback-exhaust-system-140067","title":"Borla S-Type - 1999-2004 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eBring out the deep V8 growl of your New Edge Mustang with the \u003cstrong\u003eBorla 140067 S-Type Cat-Back Exhaust System\u003c\/strong\u003e. Tuned for the 4.6L Mustang GT and Mach 1, the S-Type mufflers deliver an aggressive muscle car note under throttle without cabin drone on the highway.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from T-304 stainless steel, this 2.5-inch cat-back pairs S-Type mufflers with two 4-inch bright chrome tips. The bolt-on system replaces the exhaust behind the catalytic converters, giving your Mustang a stronger sound while retaining the factory cats.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1999–2004 Ford Mustang GT 4.6L V8 (coupe or convertible) and 2003–2004 Mustang Mach 1 4.6L V8 coupe, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.5-inch T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Bolt-on cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your New Edge the sound to match its muscle car looks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788393582731,"sku":"140067","price":1449.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_140067_xlarge.jpg?v=1792264351"},{"product_id":"gt-cat-back-exhaust-14139","title":"Borla Touring - 1987-1993 Ford Mustang GT Cat-Back Exhaust System","description":"\u003cp\u003eBring out the classic 5.0L rumble of your Fox Body with the \u003cstrong\u003eBorla 14139 Touring Cat-Back Exhaust System\u003c\/strong\u003e. Tuned for the 1987–1993 Mustang GT, it gives your V8 a mellow, deeper tone without cabin drone on the highway.\u003c\/p\u003e\n\n\u003cp\u003eThe dual cat-back system uses mandrel-bent T-304 stainless steel tubing that transitions from 2.25 inches to 2 inches. Brushed stainless turn-down outlets tuck beneath the rear bumper, keeping the factory GT look without exposed chrome tips.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 1987–1993 Ford Mustang GT 5.0L V8 hatchback and convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, mellow Borla Touring tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e Dual 2.25-inch into 2-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Two 2-inch brushed stainless steel turn-down outlets, one per side\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Cat-back system that retains the factory catalytic converters\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your Fox Body a deeper V8 sound while keeping its classic GT look.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402167947,"sku":"14139","price":1699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/14139.jpg?v=1792264540"},{"product_id":"rear-section-exhaust-atak-11838","title":"Borla ATAK - 2013-2014 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your 5.0L Mustang with the \u003cstrong\u003eBorla 11838 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. Borla’s loudest sound level gives your GT or Boss 302 an aggressive V8 roar under throttle, with no cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.75-inch mandrel-bent T-304 stainless steel, the system pairs two ATAK mufflers with 4.5-inch bright chrome tips. The bolt-on design replaces the factory rear muffler assemblies while leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2013–2014 Ford Mustang GT 5.0L V8 (coupe or convertible, automatic or manual) and 2013 Mustang Boss 302 5.0L V8 coupe\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.75-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on replacement for the factory rear muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your 5.0L Mustang Borla’s boldest exhaust note with ATAK.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402495627,"sku":"11838","price":1799.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/11838.jpg?v=1792264549"},{"product_id":"axle-back-exhaust-s-type-11837","title":"Borla S-Type - 2013-2014 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eBring out the muscle car growl of your 5.0L Mustang with the \u003cstrong\u003eBorla 11837 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers give your GT or Boss 302 a deeper, more aggressive exhaust note under throttle without cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.75-inch mandrel-bent T-304 stainless steel, the system finishes each muffler with a 4.5-inch bright chrome tip. The bolt-on design replaces the factory rear muffler assemblies while keeping the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2013–2014 Ford Mustang GT 5.0L V8 (coupe or convertible, automatic or manual) and 2013 Mustang Boss 302 5.0L V8 coupe\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, aggressive Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.75-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on replacement for the factory rear muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your 5.0L a stronger voice with Borla S-Type sound.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402593931,"sku":"11837","price":1699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_tip_36_20_2.jpg?v=1792264550"},{"product_id":"axle-back-exhaust-atak-11806","title":"Borla  ATAK - 2005-2009 Ford Mustang GT Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your Mustang V8 with the \u003cstrong\u003eBorla 11806 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. Borla’s loudest sound level delivers a hard-edged muscle car growl under throttle without cabin drone at cruising speeds. Expect an especially aggressive note on the supercharged Shelby GT500.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.5-inch mandrel-bent T-304 stainless steel, the system finishes each muffler with a 4-inch bright chrome tip. The bolt-on axle-back design replaces the factory rear muffler assemblies while leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2005–2009 Ford Mustang GT (4.6L V8) and 2007–2009 Shelby GT500 (supercharged 5.4L V8), coupe and convertible\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.5-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on replacement for the factory rear muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your Mustang Borla’s boldest exhaust note with ATAK.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402921611,"sku":"11806","price":1199.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_11750_xlarge_439006bb-ad12-4669-9a2d-21310bb29ae5.jpg?v=1792264552"},{"product_id":"exhaust-system-kit-s-type-stainless-steel-11796","title":"Borla S-Type - 2011-2014 Ford Mustang V6 Axle-Back Exhaust System","description":"\u003cp\u003eGive your 3.7L Mustang a deeper growl with the \u003cstrong\u003eBorla 11796 S-Type Axle-Back Exhaust System\u003c\/strong\u003e. The S-Type mufflers bring out a sportier V6 note when you get on the throttle without adding cabin drone at cruising speeds.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, the system includes left and right muffler assemblies, each finished with a 4.5-inch bright chrome tip. The bolt-on design replaces the factory rear mufflers while leaving the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2011–2014 Ford Mustang 3.7L V6 coupe and convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Deep, sporty Borla S-Type tone with no cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on replacement for the factory rear muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eBring out your Mustang’s V6 sound with Borla S-Type.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402954379,"sku":"11796","price":1699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_11796_xlarge.jpg?v=1792264553"},{"product_id":"atak-agressive-axle-back-system-11792","title":"Borla  ATAK - 2011-2014 Ford Mustang V6 Axle-Back Exhaust System","description":"\u003cp\u003eTurn up the volume on your 3.7L Mustang with the \u003cstrong\u003eBorla 11792 ATAK Axle-Back Exhaust System\u003c\/strong\u003e. ATAK is Borla’s loudest exhaust sound level, tuned for a sharp, aggressive note under throttle without cabin drone on the highway.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from 2.25-inch mandrel-bent T-304 stainless steel, the system includes left and right ATAK muffler assemblies, each finished with a 4.5-inch bright chrome tip. The bolt-on design replaces the factory rear mufflers while keeping the rest of your exhaust in place.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2011–2014 Ford Mustang 3.7L V6 coupe and convertible, automatic or manual\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eSound:\u003c\/strong\u003e Aggressive Borla ATAK tone, tuned for high volume without cabin drone\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 2.25-inch mandrel-bent T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eTips:\u003c\/strong\u003e Two 4.5-inch round bright chrome tips with rolled edges and angle-cut outlets\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Direct bolt-on replacement for the factory rear muffler assemblies\u003c\/li\u003e\n\u003cli style=\"margin: 0;\"\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Backed by Borla’s Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eGive your V6 Mustang Borla’s boldest exhaust note.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003ePlease note: Due to size and weight, additional shipping charges may apply to this item.\u003c\/em\u003e\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":50788402987147,"sku":"11792","price":1799.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/852958518_11792_xlarge_4e43454d-39dc-401e-90c3-6ca1c3862119.jpg?v=1792264555"},{"product_id":"1-3-4-stainless-headers-2011-2014-shelby-gt500","title":"1-3\/4\" Stainless Headers. 2011-2014 Shelby GT500 - 11422200","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBrand new in the box. \u003c\/strong\u003eNew old stock. Only have a few remaining at this price. Picked up at our warehouse in Hamilton, Ontario. For shipping quotes, please email info@steeda.ca. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1-3\/4\" x 3\" Stainless Steel Long Tube Headers. 2011-2014 Ford Shelby GT500 5.4L \/ 5.8L 4V.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e304 Stainless Steel Construction\u003c\/li\u003e\n\u003cli\u003e3\/8\" Thick Laser Cut Flanges\u003c\/li\u003e\n\u003cli\u003eOval Port\u003c\/li\u003e\n\u003cli\u003e1-3\/4\" Mandrel bent Primaries\u003c\/li\u003e\n\u003cli\u003eStock Bolt Pattern\u003c\/li\u003e\n\u003cli\u003eIncludes EGR Fitting\u003c\/li\u003e\n\u003cli\u003eIncludes PY-8034-AL Gaskets, 2) CAS-109203 Oxygen Sensor Extension Harness and BK111 \u0026amp; BK114 Bolt Kits required for Installation\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: red;\"\u003e\u003cb\u003eRequires Kooks X-Pipe or H-Pipe\u003c\/b\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50859703206027,"sku":"11422200","price":2280.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/840ca779e88d69d591d11f33551c6d18_50ca1c40-0615-4adf-9e34-cb8df1e9499d.webp?v=1792960039"},{"product_id":"2015-ford-mustang-velgen-vf5-wheel-set-set-of-4-19x10-19x11-copy","title":"2015+ Ford Mustang Velgen VF10 Wheel Set (Set of 4) - 20x10\/20x11","description":"\u003cp\u003eIf you're passionate about aesthetics, you understand that customizing your ride is essential to truly make it stand out.\u003c\/p\u003e\n\u003cp\u003eThe Velgen VF10 wheel caters to car enthusiasts seeking a ten-spoke design with a sleek aesthetic suitable for a wide range of vehicles, including cars and SUVs. Its ten-spoke layout with a subtle concave profile makes it a versatile choice. The detailed design provides a unique style without compromising space for larger brake sets.\u003c\/p\u003e\n\u003cp\u003eThis top-tier lightweight wheel is available in various finishes and widths, making it a versatile option for a wide array of applications. You have the flexibility to select between mild, medium, or deep concave options, allowing you to achieve an even more aggressive appearance for your vehicle. Additionally, you can opt for a mild offset in the front and a deeper concave in the rear, enabling you to fine-tune the perfect look for both your front and rear setups.\u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20x10\u003c\/td\u003e\n\u003ctd\u003e20x11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e73.1\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26lbs\u003c\/td\u003e\n\u003ctd\u003e28lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Satin Black","offer_id":51221881487499,"sku":"VF1020102011SB114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Bronze","offer_id":51221881520267,"sku":"VF1020102011GBRZ114345270.5","price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Silver","offer_id":51221881553035,"sku":"VF10-GS-20in-STAGGERED-PACK","price":3699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/Velgen_VF10_SatinBlack_1_720x_c25599de-d3a5-41f2-9568-2786a040bb32.webp?v=1794716790"},{"product_id":"2020-ford-explorer-st-velgen-classic5-v2-wheel-set-set-of-4-gloss-black-22x10-5-copy","title":"2020+ Ford Explorer ST Velgen Classic5 V2 Wheel Set (Set of 4) - 20x10.5","description":"\u003cp\u003eIf you're an Explorer enthusiast, you know that the first thing you need to do to make your ride stand out is to customize it, and the Velgen Classic5 V2 Lightweight Series wheels are the ideal choice to take the style and appearance to the next level! The concave on the \u003cspan\u003eClassic5 V2\u003c\/span\u003e starts out mild and gets more concave with the increase in wheel width.\u003c\/p\u003e\n\u003cp\u003eAs a predecessor to our popular \u003cspan\u003eClassic5 \u003c\/span\u003ewheels, the \u003cspan\u003eClassic5 V2\u003c\/span\u003e wheels are the popular choice in our Lightweight Series of wheels. The overall design of the \u003cspan\u003eClassic5 V2\u003c\/span\u003e closely resembles the original \u003cspan\u003eClassic5\u003c\/span\u003e framework, \u003cspan\u003ebut the spokes have been widened a bit and redesigned for a more aggressive look\u003c\/span\u003e. The\u003cspan\u003e Classic5 V2 still retains the tried and TRUE 5-spoke look, but instead of getting really thin at the edge of the wheel, we opted for the spoke to have a less aggressive taper to the edge of the wheel. \u003c\/span\u003eThis wheel is finished off with a detail-oriented Velgen center cap that is color-matched to your specific wheel.\u003c\/p\u003e\n\u003ctable class=\"ThemeTable ThemeTable--alt\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eWHEEL SPECS\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eFRONT\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong class=\"heading\"\u003eREAR\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eSIZE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20x10.5\u003c\/td\u003e\n\u003ctd\u003e20x10.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eCENTER BORE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003ctd\u003e70.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePROFILE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003ctd\u003eDeep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003ePCD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003ctd\u003e5x114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eWEIGHT\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e27lbs\u003c\/td\u003e\n\u003ctd\u003e27lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong class=\"heading\"\u003eLOAD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003ctd\u003e815kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Velgen Wheels","offers":[{"title":"Gloss Black","offer_id":51221918318731,"sku":null,"price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Satin Black","offer_id":51221918351499,"sku":null,"price":3699.99,"currency_code":"CAD","in_stock":true},{"title":"Gloss Bronze","offer_id":51221918384267,"sku":null,"price":3699.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/SatinBlack_e526ecbc-529d-4a3b-8089-9ea57bc6334c.png?v=1792262175"}],"url":"https:\/\/www.steeda.ca\/collections\/large-item-shipping.oembed","provider":"Steeda Canada","version":"1.0","type":"link"}