{"title":"Suspension \u0026 Steering","description":null,"products":[{"product_id":"detroit-speed-foxbody-chassis-stiffening-kit-1979-1993","title":"Detroit Speed Foxbody Chassis Stiffening Kit (1979-1993)","description":"\u003cp\u003e\u003cspan\u003eThe Detroit Speed Fox Chassis Stiffening Kit is designed to give maximum stiffness to the notoriously flimsy Foxbody chassis. This kit combines our Subframe Connectors and Detroit Speed EXO Brace. The Detroit Speed Subframe Connectors are designed to give maximum torsional stiffness by connecting the front and rear frame rails. The connectors do not hang lower than the rocker pinch flange so ground clearance is unaffected. In addition to front seat mounting brackets that are stronger than factory, the connectors provide torque box and lower link reinforcement. The greatest value of this kit is that it fixes two common Fox Body issues with a single integrated solution. The Detroit Speed EXO Brace fixes a notorious failure point on the Fox Body platform. This is the point where the upper links mount to the chassis. The factory torque boxes weaken over time and are known to tear or even rip completely out of the vehicle. Losing an upper link mount can result in unpredictable handling and is dangerous at any speed. Detroit Speed has developed an effective bolt-on (or weld-in) solution that improves the rigidity of the torque box, prevents damage to the chassis, and improves the safety of the vehicle. It ties the link pockets into the frame and floor pan on both sides and connects the two boxes side-to-side with a telescoping feature. The Detroit Speed EXO Brace kit is a highly recommended addition to any Fox Body Mustang; especially those that are driven hard with higher horsepower.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFixes multiple Fox Body reinforcement issues with this single component, minimizing the need and costs to replace multiple individual components\u003c\/li\u003e\n\u003cli\u003eReinforces the lower link pocket and strengthens the rear torque box to stop common cracking\u003c\/li\u003e\n\u003cli\u003eStrengthens seat mounts without interfering with stock mounting\u003c\/li\u003e\n\u003cli\u003eConnects the rear torque box to the firewall creating one continuous frame rail\u003c\/li\u003e\n\u003cli\u003eFabricated from 2\" x 2\" x .083 steel tube and .090 plate for superior stiffness with minimal added weight\u003c\/li\u003e\n\u003cli\u003eCompatible with stock suspension\u003c\/li\u003e\n\u003cli\u003eDoes not affect ground clearance\u003c\/li\u003e\n\u003cli\u003eBolt-on Kit with Weld-in capability\u003c\/li\u003e\n\u003cli\u003eFixes weaknesses in the upper torque box with bolt on solution to prevent tearing in cars up to 400hp\u003c\/li\u003e\n\u003cli\u003eWelding the kit in supports torque boxes in cars 400+hp\u003c\/li\u003e\n\u003cli\u003eTies link pockets into the frame and floor pan on both sides of the frame rail, as well as connecting the two boxes side to side with a telescoping feature\u003c\/li\u003e\n\u003cli\u003eProvides second adjustment hole for upper link to help correct instant center on lowered cars\u003c\/li\u003e\n\u003cli\u003eWorks with factory links in both hole positions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Speed \u0026 Engineering","offers":[{"title":"Default Title","offer_id":50788254417035,"sku":"010116DS","price":2702.46,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/a549beb552a390cbeb3c5265b2219763f30b6ab1__02831.jpg?v=1792261717"},{"product_id":"bmr-tubular-k-member-hammertone-s197-2005-2014","title":"BMR Tubular K-Member Hammertone  (S197 2005-2014)","description":"\u003cp\u003e\u003cspan\u003eReduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1\/4-inch, and 1 ½-inch DOM tubing, BMR's K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMR's unique K-member design feature integrated engine mounts that replace the heavy factory mounts. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies' K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMR's lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension's KM018 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eNOTES:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and\/or handling use.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.\u003c\/span\u003e\u003c\/p\u003e","brand":"BMR","offers":[{"title":"Default Title","offer_id":50788254744715,"sku":"KM018H","price":912.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/KM018_image1_small_b0be2df6-c8ef-4e1b-93cd-0432016924bf.jpg?v=1792261725"},{"product_id":"steeda-mach-e-strut-tower-brace-2021-2023","title":"Steeda Mach-E Strut Tower Brace (2021-2023)","description":"\u003cp\u003e\u003cspan\u003eIf you are looking for a start to upgrading your Mach-E, this strut tower brace is a great option. MIG-welded by hand in our Valdosta, GA manufacturing facility and mounted to your SUV in 6 places. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePowder-coated.\u003c\/span\u003e The grey powder-coat finish protects the steel and looks great on your Mach-E. The brace peeks through the louvers in the frunk plastic, hinting that your SUV is not stock.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eBetter handling.\u003c\/span\u003e This 6-bolt, welded strut tower brace is a nice improvement over the factory brace with coined ends. The added rigidity will help provide greater control and stability.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eFeatures \u0026amp; Benefits:\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSporty look\u003c\/li\u003e\n\u003cli\u003e6-bolt design\u003c\/li\u003e\n\u003cli\u003eSimple to install\u003c\/li\u003e\n\u003cli\u003eGloss grey powder coat finish\u003c\/li\u003e\n\u003cli\u003eMIG welded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788254810251,"sku":"555-5737","price":250.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-5737-v2-3__47757.jpg?v=1792261727"},{"product_id":"grant-gm-steering-wheel-adapter-3-bolt-stock-column-3196","title":"Grant GM Steering Wheel Adapter 3 Bolt w\/ Stock Column (3196)","description":"\u003cp\u003e\u003cstrong\u003eGrant GM Steering Wheel Adapter 3 Bolt w\/ Stock Column (3196)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003e \u003cmeta charset=\"utf-8\"\u003e \u003c\/strong\u003e\n\u003cp\u003eThis adapter will allow you to remove most factory steering wheels off of GM Vehicles.\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e It is illegal to remove an airbag from a vehicle that was originally equipped with one. We do not condone, nor are we responsible for this being used on applications after what is noted above. That being said, for off-road use, race only cars, this is able to adapt tor many newer years in the event that you would like to replace the steering wheel with a light 5-bolt steering wheel option. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This does not work on MPI steering wheels\u003c\/span\u003e\u003c\/p\u003e","brand":"Grant","offers":[{"title":"Default Title","offer_id":50788254875787,"sku":"3196","price":73.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/81qh-_b1wwL._AC_SL1500_abc7cc08-fbf6-440f-9038-31c2db94f9e7.jpg?v=1792261729"},{"product_id":"grant-ford-steering-wheel-adapter-3-bolt-stock-column-3289","title":"Grant Ford Steering Wheel Adapter 3 Bolt w\/ Stock Column (3289)","description":"\u003cp\u003e\u003cstrong\u003eGrant Ford Steering Wheel Adapter 3 Bolt w\/ Stock Column (3289)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cstrong\u003e \u003cmeta charset=\"utf-8\"\u003e \u003c\/strong\u003e\n\u003cp\u003eThis adapter will allow you to remove most factory steering columns off of Ford Vehicles including 84-91 as well as many other years before and after. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e It is illegal to remove an airbag from a vehicle that was originally equipped with one. We do not condone, nor are we responsible for this being used on applications after what is noted above. That being said, for off-road use, race only cars, this is able to adapt tor many newer years in the event that you would like to replace the steering wheel with a light 5 bolt steering wheel option. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e 5 bolt adapter to 3 bolt adapter is included with the purchases of any of our Grant Steering Wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This does not work on MPI steering wheels.\u003c\/p\u003e","brand":"Grant","offers":[{"title":"Default Title","offer_id":50788254908555,"sku":"3289","price":88.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/81qh-_b1wwL._AC_SL1500_0c19b366-a486-43c2-961d-02be240f089d.jpg?v=1792261730"},{"product_id":"steering-u-joint-9-16-26-spline-to-3-4-dd","title":"Steering U-Joint 9\/16-26 Spline to 3\/4 DD 15-50003","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 9\/16-26 Spline to 3\/4 DD 15-50003\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e9\/16-26 spline shafts are commonly seen on Pinto Steering Racks, Flaming River Steering racks, and others.  This shaft adapts from 9\/16-26 to the very common 3\/4 DD shaft used in most \"intermediate shafts\" (the steering linkage shaft between the column and the steering rack).  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788254941323,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-9-16-26-spline-to-3-4-dd-1_5f24c1c7-afcf-4171-a316-161f7e0b2691.jpg?v=1792261731"},{"product_id":"steering-u-joint-30-spline-to-3-4-dd-15-50002","title":"Steering U-Joint 30 Spline to 3\/4 DD 15-50002","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 3\/4 30 Spline to 3\/4 DD 15-50002\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis joint adapts a 3\/4 DD to 1978 and up GM steering boxes.  Commonly found on G-body, 1st and 2nd Gen S10's, and other GM cars with manual and power steering boxes through the early 1990's.\u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788255760523,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-3-4-30-spline-to-3-4-dd-1_f4e869bb-69d5-4cdb-a8fb-9492bc85b12a.jpg?v=1792261748"},{"product_id":"steering-u-joint-9-16-26-spline-to-3-4-round","title":"Steering U-Joint 9\/16-26 Spline to 3\/4\" Round 15-50004","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 9\/16-26 Spline to 3\/4 Round 15-50004\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e9\/16-26 spline shafts are commonly seen on Pinto Steering Racks, Flaming River Steering racks, and others.  This shaft adapts from 9\/16-26 to the very common 3\/4\" Round shaft used in lightweight intermediate shafts (the steering linkage shaft between the column and the steering rack).  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788255826059,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-9-16-26-spline-to-3-4-round-1_41ec49dd-e275-47c5-a860-41d13bdf6020.jpg?v=1792261751"},{"product_id":"steering-u-joint-3-4-smooth-to-3-4-round","title":"Steering U-Joint 3\/4 Round to 3\/4 Round 15-50006","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 3\/4 Round to 3\/4 Round 15-50006\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis joint adapts an aftermarket race column to a 3\/4 Round to 3\/4 Round for a lightweight aftermarket intermediate steering shaft. This joint needs to be welded or cross-drilled depending on your preference for fastening.\u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788255858827,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-3-4-round-to-3-4-round-1_cc4d5d3b-741f-4d53-8025-1fddce0cf1ad.jpg?v=1792261752"},{"product_id":"steering-u-joint-17mm-dd-to-3-4-dd-15-50005","title":"Steering U-Joint 17MM DD to 3\/4 DD 15-50005","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 17MM DD to 3\/4 DD 15-50005\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis joint adapts a 17MM DD to a 3\/4 DD.  We use this adaptor to adapt a 3\/4 DD intermediate shaft to a 17MM male steering rack shaft. This is the same as what we use in our 5th Gen Camaro Steering Column. This joint needs to be welded or cross-drilled depending on your preference for fastening.\u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788255891595,"sku":null,"price":0.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-17mm-double-d-to-3-4-dd-1_015ca4cc-c8c2-4017-a65a-bb2b502e5b1f.jpg?v=1792261753"},{"product_id":"3-4-chromoly-065-wall-lightweight-intermediate-shaft-14","title":"3\/4\" Chromoly .065\" Wall Lightweight Intermediate Shaft 14\"","description":"\u003cp\u003e3\/4\" Chromoly .065\" Wall Lightweight Intermediate Shaft 14\"\u003c\/p\u003e\n\u003cp\u003eMany Drag Race only customers will use lightweight steering shaft such as this as it is considerable weight and cost savings to use 3\/4\" OD chromoly shaft.  \u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788255924363,"sku":"CHRO-SHAFT","price":28.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-3-4-chromoly-065-wall-lightweight-intermediate-shaft-14-2_a968624d-52c7-42d7-842a-b988e739500d.jpg?v=1792261754"},{"product_id":"steering-u-joint-36-spline-to-3-4-round-15-50010","title":"Steering U-Joint 36 Spline to 3\/4 Round-15-50010","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 13\/16 36 Spline to 3\/4 Round-15-50010\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis joint adapts a 67-72 Nova\/Camaro FACTORY steering box to a Motion Race style column.  \u003c\/p\u003e\n\u003cp\u003eNote: Aftermarket replacement steering boxes may use a different spline count.  \u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788256055435,"sku":"15-50010","price":125.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-3-4-30-spline-to-3-4-dd-1_7e917903-8424-450a-a23b-1d62b1754a7c.jpg?v=1792261757"},{"product_id":"steering-u-joint-30-spline-to-3-4-round-smooth-15-50007","title":"Steering U-Joint 30 Spline to 3\/4 Round\/Smooth - 15-50007","description":"\u003cp\u003e\u003cstrong\u003eSteering U-Joint 30 Spline to 3\/4 Round\/Smooth - 15-50007\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis joint adapts a 3\/4 Smooth\/Round steering intermediate shaft to 1978 and up GM steering boxes.  Commonly found on G-body, 1st and 2nd Gen S10's, and other GM cars with manual and power steering boxes through the early 1990's.\u003c\/span\u003e\u003c\/p\u003e","brand":"Ujoint","offers":[{"title":"Default Title","offer_id":50788256088203,"sku":"15-50007","price":125.58,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steering-steering-u-joint-3-4-30-spline-to-3-4-dd-1_47a814f0-871c-4f7d-8794-a16e13147bd8.jpg?v=1792261758"},{"product_id":"steeda-s550-mustang-tie-down-kit-2015-2023","title":"Steeda S550 Mustang Tie Down Kit (2015-2023)","description":"\u003cp\u003eTired of trying to figure out the best way to strap your 2015+ S550 Mustang coupe down to your trailer? Steeda has developed a bolt-on solution to eliminate the guess work. The Steeda S550 Mustang Tie Down Kit has locations on both the front and rear for you to attach straps, helping to make securing your vehicle quick and easy. No more trying to strap down your Mustang on the sides or with a permanent hook coming through your front bumper. These brackets are made from high strength steel and zinc-plated for longevity. The brackets also are uniquely designed for clearance on lowered vehicles so they do not have to be removed once installed. They also fit with popular twin turbo setups making securing your high horse powered Mustang a breeze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eGT350 and 2018+ Performance Pack models will require additional modifications to accommodate the extended belly pan design. Kit will not fit 2015+ convertible models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy bolt-on solution\u003c\/li\u003e\n\u003cli\u003eShortens time to tie down Mustang\u003c\/li\u003e\n\u003cli\u003eMade from high-strength steel and zinc-plated\u003c\/li\u003e\n\u003cli\u003eDesigned for clearance on lowered vehicles\u003c\/li\u003e\n\u003cli\u003eCoupe specific fitment\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788258021515,"sku":"555-5202","price":332.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555--5202--1__20723.jpg?v=1792261779"},{"product_id":"stop-the-hop-drag-ultimate-kit-diff-inserts-billet-upper-arms2015-2024-s550-s650","title":"Stop the Hop Drag Ultimate Kit (Diff inserts\/Billet Upper Arms)-(2015-2024) S550\/S650","description":"\u003cp\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop in drag racing. This is where the Stop the Hop Drag Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop in the new S550 Mustang to help you get the best time possible at the drag strip. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003cbr\u003e\u003cbr\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003cbr\u003e\u003cbr\u003eThe 3rd component of this kit is the strongest support brace for the S550 IRS on the market!! Made in house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003cbr\u003e\u003cbr\u003eThe 4th piece is Steeda's rear lower control arm spherical bushings which are recommended for all drag race applications. If you drag race your GT, EcoBoost, or V6 Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tires hook immediately upon acceleration. Our spherical bearings stop your S550 from building negative toe on launch. In addition to eliminating deflection and compliance of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.\u003c\/p\u003e\n\u003cp\u003eThe 5th piece included in this kit is the impressive Steeda Adjustable Rear Camber Arms. These help you dial in that track alignment, correct camber after lowering your Mustang, and help you get a better contact patch at the track. These are CNC machined from 6061 aluminum and offer +2 through -5 degrees of adjustment.\u003c\/p\u003e\n\u003cp\u003eSteeda's Rear Toe Links are the 6th item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda.\u003c\/p\u003e\n\u003cp\u003e7th in the kit, the Steeda Billet Vertical Links with Delrin Bushings prevents deflection and stiffens the rear of your S550. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cost your Mustang energy at launch and will hold your Ford back from reaching its full potential.\u003c\/p\u003e\n\u003cp\u003eThe 8th and final piece of this kit is the Ford Performance Knuckle to Toe Link Assembly. This replaces the factory rubber bushing and, like above, reduces deflection. This part will improve the handling and help your Mustang perform at its best.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Steeda IRS Subframe support braces will not fit convertible\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-rear-irs-subframe-brace-2015-coupe-555-5754.html\"\u003e\u003cstrong\u003e555-5754\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438.html\"\u003e\u003cstrong\u003e555-4438\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-sub-frame-bushing-support-system-2015-555-4437.html\"\u003e\u003cstrong\u003e555-4437\u003c\/strong\u003e\u003c\/a\u003e - Steeda IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-rear-adjustable-camber-arms-15-16-all-555-4123.html\"\u003e555-4123\u003c\/a\u003e - \u003c\/span\u003eSteeda Rear Adjustable Camber Arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-billet-aluminum-vertical-links-2015-all-555-4121.html\"\u003e555-4121\u003c\/a\u003e - \u003c\/span\u003eSteeda Billet Aluminum Vertical Links with Delrin Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-adjustable-rear-toe-link-2015-all-555-4120.html\"\u003e555-4120\u003c\/a\u003e - \u003c\/span\u003eSteeda Adjustable Rear Toe Links\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-rear-lower-control-arm-spherical-bearing-2015-2016-all-555-4117.html\"\u003e555-4117\u003c\/a\u003e\u003c\/strong\u003e - Steeda Rear Lower Control Arm Spherical Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/knuckle-to-toe-link-bearing-assembly-15-17-gt-ecoboost.html\"\u003eM-5A460-M\u003c\/a\u003e -\u003c\/span\u003e Ford Performance Knuckle To Toe Link Bearing Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEliminate wheel hop\u003c\/li\u003e\n\u003cli\u003eEliminate subframe movement\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003cli\u003eSquares subframe to the chassis\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli\u003eBetter 60-foot times\u003c\/li\u003e\n\u003cli\u003eAllows you to dial in the suspension for faster quarter-mile times\u003c\/li\u003e\n\u003cli\u003ePuts more energy into launching your S550\u003c\/li\u003e\n\u003cli\u003eGives you more control over your suspension with adjustable components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e California Residents: Cancer and Reproductive Harm; \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788258283659,"sku":"555-2129D","price":4307.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-2129-D__60518_3661a41a-cf8a-4a29-bad0-66971fbc8577.jpg?v=1792261780"},{"product_id":"steedas-hardcore-s550-mustang-differential-brackets","title":"Steeda's HARDCORE S550 Mustang Differential Brackets","description":"\u003cp\u003eWant to tear up the pavement and not your differential housing? Steeda has the part for you! Steeda's HARDCORE S550 Mustang Differential Brackets were developed after multiple aluminum differential housings had front ear failures at the track. This simple bolt-in part locks the differential in place and redistributes the loads so that the front ears are under less stress. This enables you to run the aluminum differential housing, which shaves 20+ lbs off of the rear of your S550! The Steeda HARDCORE S550 Mustang Differential Brackets are a must for anyone running today's compounds drag radials and slicks. NVH will be added, but this is a simple install that can be done before a track day and removed when hitting the streets in your daily.\u003c\/p\u003e\n\u003cp\u003eDecrease wheel hop and rear differential movement on your S550 Mustang by adding these braces, differential pinion rise and lateral movement are significantly reduced. Less drivetrain movement means more power to ground. More power to the ground means more enjoyment out of your Mustang.\u003c\/p\u003e\n\u003cp\u003eSteeda's design has also eliminated the single shear design which exists between the rear differential mounting ear and the rear subframe bushing, replacing it with a triple shear design. This reduces the average stress on the bolt, allowing for 3 times the load capacity! But Steeda didn't stop there. We have also added upgraded hardware for an added factor of safety, ensuring you confidence when launching your Mustang.\u003c\/p\u003e\n\u003cp\u003eUsed in conjunction with our all new\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-555-4051-s550-differential-bolt-upgrade-kit\"\u003e\u003cstrong\u003e555-4051\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e- Steeda S550 Mustang THRU Threaded Differential Bolt Upgrade Kit, you'll have no worries riding your Mustang to fast times.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eDecrease wheel hop\u003c\/li\u003e\n\u003cli\u003eReduced pinion rise and differential bushing deflection\u003c\/li\u003e\n\u003cli\u003eLess movement = more power to the ground\u003c\/li\u003e\n\u003cli\u003eEliminates single shear design\u003c\/li\u003e\n\u003cli\u003eUpgraded hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788259332235,"sku":"555-4050","price":440.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555_4050_po5__82893.jpg?v=1792261781"},{"product_id":"stop-the-hop-handling-ultimate-kit-with-diff-lockouts","title":"Stop the Hop Handling Ultimate Kit (with Diff Lockouts)","description":"\u003cp\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop and improve the handling of their Mustang. This is where the Stop the Hop Handling Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop and bushing deflection in the new S550\/S650 Mustang to help you take corners faster and get tack sharp handling. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550\/S650 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more. Installed on our 2024 Mustang GT HPDE build along with our Competition Front and Rear Sway Bar Kit, we achieved over a 2 second improvement in our lap times!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003cbr\u003e\u003cbr\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003cbr\u003e\u003cbr\u003eThe 3rd component of this kit is the strongest support brace for the Mustang IRS on the market!! Made in-house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSteeda's Rear Toe Links are the 4th item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda.\u003c\/p\u003e\n\u003cp\u003e5th in the kit, the Steeda Billet Vertical Links with Urethane Bushings reduce deflection and tighten the rear of your Mustang. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground and improve control, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cause sloppy or soft handling and will hold your Ford back from reaching its full potential.\u003c\/p\u003e\n\u003cp\u003eThe 6th piece is Steeda's Adjustable Differential Bushing Insert System. These polyurethane bushings replace the soft rubber factory bushings that result in pinion changes, differential movement, and wheel hop. This will improve handling by helping to keep the rear of your S550\/S650 connected. You can expect some increase in NVH and may experience \u003cspan\u003eincreased transfer of gear whine noise problematic to some Super 8.8 IRS differentials\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Coupe fitment only. Steeda IRS Subframe Support Braces will not fit convertibles. Will not fit 2024+ Mustang equipped with Brembo brakes. Kit not compatible with GT500.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-rear-irs-subframe-brace-2015-coupe-555-5754.html\"\u003e\u003cstrong\u003e555-5754\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-adjustable-differential-bushing-insert-system-urethane-2015-ecoboost-555-4443.html\"\u003e555-4443\u003c\/a\u003e -\u003c\/span\u003e Steeda Adjustable Differential Bushing Insert System\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-subframe-alignment-kit-2015-all-555-4438.html\"\u003e\u003cstrong\u003e555-4438\u003c\/strong\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-irs-sub-frame-bushing-support-system-2015-555-4437.html\"\u003e\u003cstrong\u003e555-4437\u003c\/strong\u003e\u003c\/a\u003e - Steeda IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-555-4129-s550-vertical-links-poly-bushings\"\u003e555-4129\u003c\/a\u003e - \u003c\/span\u003eSteeda Billet Aluminum Vertical Links with Urethane Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-adjustable-rear-toe-link-2015-all-555-4120.html\"\u003e555-4120\u003c\/a\u003e - \u003c\/span\u003eSteeda Adjustable Rear Toe Links\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-67g50tl419\/content\/banners\/fitmentConfirmed.jpg\" alt=\"S650 Fitment Confirmed\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEliminate wheel hop\u003c\/li\u003e\n\u003cli\u003eMay increase NVH (gear noise)\u003c\/li\u003e\n\u003cli\u003eEliminate subframe movement\u003c\/li\u003e\n\u003cli\u003eMinimizes differential movement\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003cli\u003eSquares subframe to the chassis\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli\u003eMore predictable handling\u003c\/li\u003e\n\u003cli\u003eGreater control and stability\u003c\/li\u003e\n\u003cli\u003eFits 2024+ non-Brembo Pack Mustangs\u003c\/li\u003e\n\u003cli\u003eOur 2024+ HPDE build achieved over a 2-second improvement in lap times when combined with our Competition Front and Rear Sway Bar Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"image-center\"\u003e\u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-67g50tl419\/product_images\/images\/pages\/resources\/articles\/body\/steeda-stop-the-hop-infographic.jpg\" alt=\"Steeda S550 Stop The Hop Infographic\"\u003e\u003cem\u003eFind out\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.steeda.com\/which-stop-the-hop-is-best-for-you\" target=\"_blank\"\u003ewhich Stop The Hop Kit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eis best for you!\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788259496075,"sku":"555-2129H","price":2247.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-2129-H-v2-1__19019_573182fa-0114-43c6-a1bd-fa42393d3fc9.jpg?v=1792261782"},{"product_id":"ford-mustang-s550-s650-weekend-drag-pack-extreme-2015-2024","title":"Ford Mustang S550\/S650 Weekend Drag Pack 2015-2024","description":"\u003cul\u003e\n\u003cli\u003eUpgrade your Mustang to a weekend-ready drag car with our transformation package. Unleash its full potential and dominate the drag strip with ease. Push your limits and conquer the competition.\u003c\/li\u003e\n\u003cli\u003eOur package includes:\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"555-8231\" href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-gt-drag-springs-linear-2015-2020?_pos=2\u0026amp;_sid=12a1b8695\u0026amp;_ss=r\"\u003e555-8231  \u003c\/a\u003e                Steeda Linear Drag Springs\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"555-4050\" href=\"https:\/\/steeda.ca\/products\/steedas-hardcore-s550-mustang-differential-brackets?_pos=2\u0026amp;_sid=9cc29d984\u0026amp;_ss=r\"\u003e555-4050 \u003c\/a\u003e                 \u003cspan\u003eSteeda HARDCORE S550 Mustang Differential Bracket\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"555-8152\" href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-billet-rear-shock-mount-12mm-2015-2021?_pos=3\u0026amp;_sid=672fc06f3\u0026amp;_ss=r\"\u003e555-8152 \u003c\/a\u003e                 Steeda Billet Shock Mounts (12mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"555-2129D\" href=\"https:\/\/steeda.ca\/products\/stop-the-hop-drag-ultimate-kit-diff-inserts-billet-upper-arms2015-2024-s550-s650?_pos=2\u0026amp;_sid=0ca2aec9a\u0026amp;_ss=r\"\u003e555-2129D\u003c\/a\u003e               Steeda \u003cspan\u003eStop the Hop Drag Ultimate Kit (With Diff Inserts)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"555-5202\" href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-tie-down-kit-2015-2023?_pos=2\u0026amp;_sid=1d1ba6ab2\u0026amp;_ss=r\"\u003e555-5202 \u003c\/a\u003e                 \u003cspan\u003eSteeda S550 Mustang Tie Down Kit \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"10202303S\" href=\"https:\/\/steeda.ca\/products\/steeda-mustang-gt-3-5-1350-series-aluminum-driveshaft-manual-transmission-2018-2024?_pos=2\u0026amp;_sid=385c33079\u0026amp;_ss=r\"\u003e10202303S\u003c\/a\u003e               Steeda One Piece Driveshaft (Aluminium)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"M-4033-G4\" href=\"https:\/\/steeda.ca\/collections\/new-items\/products\/ford-performance-8-8-axle-girdle-cover-kit-2015-2024s550-s650\"\u003eM-4033-G4\u003c\/a\u003e              \u003cspan\u003eFord Racing Mustang 8.8\" Differential Cover with Girdle\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"VWST013\" href=\"https:\/\/steeda.ca\/products\/vms-v-star-wheel-rear-rim-package-s550-ford-mustang2005-2020?_pos=3\u0026amp;_sid=1b70d0108\u0026amp;_ss=r\"\u003eVWST013\u003c\/a\u003e                  VMS V-Star 17x10 Rear Rim Package\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"#180-700\" href=\"https:\/\/steeda.ca\/products\/nt555r-drag-radial-275-40r17-180-700?_pos=2\u0026amp;_sid=0d55f271d\u0026amp;_ss=r\"\u003e180-700\u003c\/a\u003e                    \u003cspan\u003eNitto NT-555R Drag Radial Tire 275\/40\/R17 (x2)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-nhra-legal-driveshaft-safety-loop-2015-2019-all?_pos=2\u0026amp;_sid=8f71a4ad7\u0026amp;_ss=r\" title=\"555-5070\"\u003e555-5070\u003c\/a\u003e                  Steeda \u003cspan\u003eNHRA Legal Driveshaft Safety Loop\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-gt-5-0l-coyote-304-stainless-resonator-delete-x-pipe-2018-2020?_pos=3\u0026amp;_sid=d587c093a\u0026amp;_ss=r\" title=\"555-3618\"\u003e555-3618\u003c\/a\u003e                  \u003cspan\u003eSteeda 304SS Resonator Delete X-Pipe\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/2018-2019-mustang-cold-air-intake-package-with-tuner?_pos=3\u0026amp;_sid=bde8b71c1\u0026amp;_ss=r\u0026amp;variant=31793377804373\" title=\"CAI 2018\"\u003eBYOCAI18-1\u003c\/a\u003e              JLT Cold Air Intake \u0026amp; SCT Tuner Package\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/jlt-oil-separator-3-0-passenger-side-18-19-mustang-gt?_pos=3\u0026amp;_sid=b3703c6f3\u0026amp;_ss=r\u0026amp;variant=32916021280853\" title=\"3024P-B\"\u003e3024P-B\u003c\/a\u003e                    J\u0026amp;L Oil Separator Passenger Side (Black) \u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-clutch-spring-assist-35-lb-in-555-7022?_pos=3\u0026amp;_sid=f0399ed86\u0026amp;_ss=r\" title=\"555-7022\"\u003e555-7022\u003c\/a\u003e                  Steeda Clutch Spring 35lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note: Kit will vary from vehicle year\/options, Please contact before purchase of kit.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788259561611,"sku":"Dragpak6","price":11131.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/DSC03666.jpg?v=1792261784"},{"product_id":"ford-mustang-s550-s650-ultimate-upgrade-package-track","title":"Ford Mustang S550\/S650 Track Pack Upgrade 2015-2024","description":"\u003cp\u003eEnhance your driving experience with the Ford Mustang S550\/S650 Ultimate Upgrade Package (Track). Upgrade your factory Mustang and achieve improved performance, handling, and overall driving capabilities. Transform your car into the ultimate track machine with this must-have upgrade package.\u003c\/p\u003e\n\u003cp\u003eThis package includes :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-extreme-g-trac-k-member-brace-555-5532?_pos=2\u0026amp;_sid=9789711b0\u0026amp;_ss=r\"\u003e555-5536\u003c\/a\u003e       \u003cspan\u003eSteeda S550\/S650 Mustang Extreme G-Trac Brace\u003c\/span\u003e  \u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-mustang-coupe-full-length-jacking-rails-2015-2021?_pos=2\u0026amp;_sid=e725dd905\u0026amp;_ss=r\"\u003e555-5212\u003c\/a\u003e       Full Length Jacking Rails\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-s550-mustang-gt-5-0l-coyote-304-stainless-resonator-delete-x-pipe-2018-2020?_pos=3\u0026amp;_sid=258566466\u0026amp;_ss=r\"\u003e555-3618\u003c\/a\u003e       \u003cspan\u003eSteeda's 304SS Resonator Delete X-Pipe\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-mt-82-tri-ax-race-short-throw-shifter-555-7317?_pos=2\u0026amp;_sid=2a87f90ae\u0026amp;_ss=r\"\u003e555-7317 \u003c\/a\u003e      Steeda \u003cspan\u003eTri-Ax Race Short Throw Shifter\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/stop-the-hop-handling-ultimate-kit-with-diff-lockouts?_pos=2\u0026amp;_sid=97ff71f3d\u0026amp;_ss=r\"\u003e555-2129H \u003c\/a\u003e   \u003cspan\u003eStop the Hop Handling Ultimate Kit \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-mustang-w-magneride-nurburg-package-2015-2024s550-s650?_pos=2\u0026amp;_sid=bc3af8587\u0026amp;_ss=r\"\u003e555-2155\u003c\/a\u003e       Nurburg Handling Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-heavy-duty-braided-clutch-line-555-7016?_pos=2\u0026amp;_sid=5e30d3802\u0026amp;_ss=r\"\u003e555-7016\u003c\/a\u003e       \u003cspan\u003eSteeda S550\/S650 Mustang Heavy Duty Braided Clutch Line\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/mustang-stainless-braided-brake-lines-555-6027?_pos=2\u0026amp;_sid=722998514\u0026amp;_ss=r\"\u003e555-6027 \u003c\/a\u003e      \u003cspan\u003eSteeda's front and rear stainless braided brake lines\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/mt-82-transmission-mount-bushing-insert-555-4037?_pos=2\u0026amp;_sid=9e51d0f6b\u0026amp;_ss=r\"\u003e555-4037\u003c\/a\u003e       \u003cspan\u003eSteeda MT-82 Transmission Mount Bushing Insert\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-clutch-spring-assist-35-lb-in-555-7022?_pos=3\u0026amp;_sid=96ab984cd\u0026amp;_ss=r\"\u003e555-7022\u003c\/a\u003e       \u003cspan\u003eSteeda S550 Mustang Clutch Assist Spring 35 lb\/in \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/jlt-oil-separator-3-0-passenger-side-18-19-mustang-gt?_pos=3\u0026amp;_sid=69b8da940\u0026amp;_ss=r\u0026amp;variant=32916021280853\"\u003e3024P-B\u003c\/a\u003e         J\u0026amp;L Oil Separator Passenger side \u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/2018-2019-mustang-cold-air-intake-package-with-tuner?_pos=3\u0026amp;_sid=fc55bc5a8\u0026amp;_ss=r\u0026amp;variant=31793377804373\"\u003eBYOCAI18-1\u003c\/a\u003e   JLT Cold Air Intake Package With SCT Tuner.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-bumpsteer-kit-555-8133?_pos=4\u0026amp;_sid=f22e4996f\u0026amp;_ss=r\"\u003e555-8133\u003c\/a\u003e       Steeda Bumpsteer Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePlease note: Items may vary depending on vehicle year and options. Please contact before purchase of kit.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788259627147,"sku":"Trackpak6","price":8208.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/BestWeekendRacer-header.jpg?v=1792261785"},{"product_id":"steeda-mustang-pro-action-front-strut-and-rear-shock-kit-adjustable-1987-1993","title":"Steeda Mustang Pro-Action Front Strut and Rear Shock Kit - Adjustable (1987-1993)","description":"\u003cp\u003eWant the pinnacle of suspension performance for your Fox Body Mustang? These Pro-Action dampers are the perfect upgrade. With years of expertise in Mustang performance parts, Steeda developed these shocks and struts to provide excellent performance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBetter performance.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThese dampers are adjustable so that you can fine tune your handling on the street and track. Combined with lowering springs and performance suspension parts, your Fox Body will handle better than ever and feel better than it did rolling off of the showroom floor.\u003c\/p\u003e\n\u003cp\u003eSwitch to the Steeda Pro-Action shocks and struts for the pinnacle of performance, ride quality and reliability.\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSteeda proprietary shock valving\u003c\/li\u003e\n\u003cli\u003eWorks great with lowering springs\u003c\/li\u003e\n\u003cli\u003eReduce squat and improve control\u003c\/li\u003e\n\u003cli\u003eAdjustable\u003c\/li\u003e\n\u003cli\u003eFits 87-93 V8 and 84-86 SVO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788259922059,"sku":"555-8427","price":1128.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8427-v1-1__59762.jpg?v=1792261789"},{"product_id":"rtr-mustang-non-magneride-tactical-performance-coilovers-2015-2024-s550-s650","title":"RTR Mustang Non-MagneRide Tactical Performance Coilovers (2015-2024) S550\/S650","description":"\u003cp\u003eImprove the performance of your Ford with this suspension upgrade from RTR. Engineered to enhance your Mustang and make driving more exciting and fun.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eImprove handling and performance.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eMake your S550\/S650 more exciting to drive and improve the performance of your Ford with this kit from RTR. Blending street and track performance, you can unlock more from your car.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eQuality that rivals OE parts.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eRTR manufactures their parts from high-quality materials that OE suppliers use. OEM CAD data from Ford allows RTR to achieve great fitment that rivals factory pieces. If you want a high-quality upgrade that is on par with the factory parts on your vehicle, RTR is a great choice.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Benefits:\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMono-Tube Shock Design\u003c\/li\u003e\n\u003cli\u003eLinear Piston And Damping Curve\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM Top Plate And Bearing\u003c\/li\u003e\n\u003cli\u003e30-Clicks Of Simultaneous Compression\/Rebound Adjustment\u003c\/li\u003e\n\u003cli\u003eAllows for Front Camber Adjustment\u003c\/li\u003e\n\u003cli\u003eCustom RTR Spring Rates\u003c\/li\u003e\n\u003cli\u003eCustom RTR Valving\u003c\/li\u003e\n\u003cli\u003eHeight Adjustment Independent Of Spring Compression\u003c\/li\u003e\n\u003cli\u003eIncludes Spanner Wrenches\u003c\/li\u003e\n\u003cli\u003e1-Year Warranty Against Manufacturers Defect\u003c\/li\u003e\n\u003cli\u003eFully Rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe factory rear shock mounts will not fit with the rear coil-overs. Steeda 555 8152 Mustang Billet Rear Shock Mount - 12mm Adjustable Pro Action Rear Shocks All (2015+) will fit and are compatible with the rear coil-overs.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"RTR","offers":[{"title":"Default Title","offer_id":50788260020363,"sku":"1598-0420-01","price":2912.94,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/rtr-1598-0420-01-v1-1__43915.jpg?v=1792261790"},{"product_id":"steeda-bronco-strut-tower-brace-2021-2023","title":"Steeda Bronco Strut Tower Brace (2021-2023)","description":"\u003cp\u003eSupe-Up your Bronco's engine bay with this Strut Tower Brace from Steeda. This fits both the 4 cylinder engine and the 6 cylinder engine and provides clearance for an engine cover if your Bronco has one installed.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMade in America.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis strut tower brace is made in-house at Steeda's Valdosta, Georgia facility. Fabricated on our CNC tube bender from 1\" high-strength tubular DOM steel for great strength. Solid rod ends increase strength and provide stability.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShow ready styling.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWith the Steeda plaque front and center, people will know that you only equip your Bronco with the best. Perfect for the Bronco owner that enjoys car shows and meets and wants a unique engine bay. Stainless steel hardware provides a lasting finish and great looks.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eQuick Removal for off-road driving.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to tackle a trail or go rock crawling, the strut tower brace can be removed in less than 5 minutes with 2 bolts. This allows you to get greater flexibility out of your Bronco so that you maximize traction.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Benefits:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eBent on CNC tube bender for precision\u003c\/li\u003e\n\u003cli\u003eHigh-strength 1\" tubular DOM steel\u003c\/li\u003e\n\u003cli\u003eGrey powder coated finish\u003c\/li\u003e\n\u003cli\u003eTig welded mounting plates\u003c\/li\u003e\n\u003cli\u003eAdjustable height\u003c\/li\u003e\n\u003cli\u003eSimple, 30 minute installation\u003c\/li\u003e\n\u003cli\u003e2 bolt, 5-minute removal for maximum performance off-road\u003c\/li\u003e\n\u003cli\u003eFits both 4 cylinder and 6 cylinder Bronco's\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp id=\"prop65\"\u003e\u003cimg alt=\"warning\" src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCalifornia Residents: Cancer and Reproductive Harm;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788260085899,"sku":"555-5738","price":646.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-5738-v1-3__79272.jpg?v=1792261792"},{"product_id":"ridetech-2015-2024-mustang-hq-series-air-suspension-systems-kit","title":"RideTech 2015-2024 Mustang HQ Series Air Suspension Systems Kit","description":"\u003cp\u003e\u003cspan\u003eRideTech 2015-24 Mustang HQ Series air suspension systems offer adjustability for an aggressive, yet functional stance and improved handling performance without sacrificing ride quality or comfort. Packaging front ShockWaves and rear CoolRide shocks, these kits offer many features and benefits that will extend the performance capabilities of your Blue Oval muscle car. Equally important when upgrading suspension components are the sway bars. So RideTech offers these HQ Series systems with or without front and rear sway bars. Select the kit you want for your 2015-24 Mustang.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeatures and benefits:\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e* Fox Factory shock internals and valving along with monotube design provide excellent ride quality and handling\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Anodized gunmetal black and gray finish--great looks and long lasting finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Improved range of camber and caster for performance driving alignments:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-- Caster range: +7.5 to +8.5 degrees\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-- Camber range: -2.5 to +.25 degrees\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e-- Camber range extreme (slug flipped): -1.0 to -4.25 degrees\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Impact forged aluminum shock body provides an excellent strength-to-weight ratio\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Allows 1.5 to 2.5 in. drop in ride height from stock, improving vehicle center of gravity and reduce wheel-to-tire gap\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Fully deflated will net an additional 2 to 3 in. drop\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* 24-position rebound adjustable HQ Series ShockWaves allow ride quality and suspension responsiveness adjustability\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Rubber isolated spherical bearing minimizes NVH noises commonly associated with performance suspension\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Tunable pressures based on vehicle use: street performance, drag, road course, autocross\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Application specific mounting for a seamless installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e* Bolt-on installation; no irreversible modifications necessary\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(Note) Kit includes front and rear sway bars. +7.5 to +8.5 degrees caster range and -2.5 to +.25 degrees camber range. -1.0 to -4.25 degrees camber range with the slugs flipped. Cars equipped with factory electronic shock systems require an Electronic Shock Simulator kit from Shock Delete Engineering. (Control pack and compressor system not included)\u003c\/span\u003e\u003c\/p\u003e","brand":"RideTech","offers":[{"title":"Default Title","offer_id":50788260511883,"sku":"12270296","price":6109.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/ridetech-12270298-v1-2__09130.1681243297.1280.1280__34570.1719238384.1280.1280__07645.jpg?v=1792261797"},{"product_id":"steeda-mustang-w-magneride-nurburg-package-2015-2024s550-s650","title":"Steeda Mustang w\/ MagneRide Nurburg Package (2015-2024)S550\/S650","description":"\u003cp\u003eSteeda's Q767 Mach 1 Mustang showcased impressive capability while at the Nurburgring, overtaking cars twice its price. If you want to get the same handling and performance from your Mach 1, this package includes the essentials to crank up the performance.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDual Rate MagneRide Lowering Springs.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThe lowering springs in this kit are compatible with MagneRide suspension and were thoroughly tested and refined at the track by Steeda. These springs are race-proven in NASA and SCCA events and when combined with Steeda's adjustable camber plates, helped Steeda achieve a 4-second lap time improvement.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCamber Plates.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eCorrect negative camber, align your Mustang for racing, and increase maximum lateral acceleration by up to .11 G's. The camber plates can eliminate understeer and turn-in response to give your Mustang a nimble and agile feel on track.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompetition Sway Bars.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThese competition sway bars are specifically designed and engineered for racing. Track tested on our #20 Race Car, HPDE Q500, and Q350 EcoBoost. Relocation brackets are included in the kit to provide greater clearance and place the end links in a vertical position to prevent binding. The rates of these bars are designed to complement and work with other track-focused upgrades.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eProduct Benefits:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplements all MagneRide-equipped Mustangs\u003c\/li\u003e\n\u003cli\u003eFront Sway Bar is up to 97% stiffer than OE PP GT bar\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar is up to 39% softer than our standard rear bars\u003c\/li\u003e\n\u003cli\u003eSway bars are adjustable with billet steel ends\u003c\/li\u003e\n\u003cli\u003eUp to 3% of camber adjustment with Steeda camber plates\u003c\/li\u003e\n\u003cli\u003eCamber plates improve overall handling and cornering performance\u003c\/li\u003e\n\u003cli\u003eMagneRide Dual Rate Springs are race-proven and tested by professional racers\u003c\/li\u003e\n\u003cli\u003eDual Rate Springs lower your Mustang approx. 0.5-inches on all four corners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eIncluded in the Nurburg Package:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-555-1036-mustang-competition-front-and-rear-sway-bar-kit\" target=\"_blank\"\u003e555-1036\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eSteeda Mustang Competition Front and Rear Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/steeda-s550-mustang-camber-plates-15-16-all-555-8139.html\" target=\"_blank\"\u003e555-8139\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eSteeda Mustang Camber Plates\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.steeda.com\/mustang-magneride-lowering-springs_555-8243\" target=\"_blank\"\u003e555-8243\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eSteeda Mustang MagneRide Dual Rate Ultimate Handling Lowering Springs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788261658763,"sku":"555-2155","price":2166.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-2155-v1-1__71419_ed98c65a-f22e-4ea4-8395-bf1458e09109.jpg?v=1792261805"},{"product_id":"steeda-s550-mustang-pp-style-front-control-arms-lateral-links-2015-2023","title":"Steeda S550 Mustang PP Style Front Control Arms Lateral Links (2015-2023)","description":"\u003cp\u003eYou love your S550 Mustang, but there's always room for improvement: increased steering response, decreased body roll, and increased cornering grip - a must for the true performance handling enthusiast. These Performance Pack style arms feature rubber bushings with a higher than OE durometer. The higher durometer bushings provide tighter steering and better handling without added NVH.\u003c\/p\u003e\n\u003cp\u003eSteeda's industry-first S550 Mustang Lateral Links, are a great upgrade for stock height 2015+ Mustang owners looking for a bolt-on suspension upgrade to increase handling performance!\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDoes not fit MagneRide\u003c\/p\u003e\n\u003csection\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eReduces alignment change under loads\u003c\/li\u003e\n\u003cli\u003eIncreases steering wheel responsiveness\u003c\/li\u003e\n\u003cli\u003eEasy install\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003c!----\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788263297163,"sku":"555-4914","price":396.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5554914_p04__64335.jpg?v=1792261821"},{"product_id":"steeda-explorer-rear-differential-brace-2020-2023","title":"Steeda Explorer Rear Differential Brace (2020-2025)","description":"\u003cp\u003e\u003cb\u003eProduct Benefits:\u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual bushing support\u003c\/li\u003e\n\u003cli\u003eCompatible with single and dual differential bushing designs from the factory\u003c\/li\u003e\n\u003cli\u003eEasily change diff fluid without removing the brace\u003c\/li\u003e\n\u003cli\u003eCNC-machined in in-house in the USA\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 and 12.9 hardware included\u003c\/li\u003e\n\u003cli\u003eZinc plated washers and spacers\u003c\/li\u003e\n\u003cli\u003eBillet steel locating sleeves increase strength and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePut the power down with this billet aluminum differential brace from Steeda! During testing, Steeda found that the differential bushings were being stretched to their limit with hard launches, so Steeda set out to disperse the load and minimize rear differential movement.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBillet construction.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eTo keep the part lightweight yet ultra-strong, Steeda CNC machines this brace from 6061 billet aluminum at their Valdosta, GA location.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBetter performance.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWith 50% more attachment points than the competition and a dual bushing design, you can be confident this brace will out perform. An optional stiffer durometer bushing set can be added to the kit for those that are looking for maximum performance at the track and do not mind minor NVH.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePractical design.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eRetain great functionality when you upgrade with the differential brace. An access hole is machined into the brace to retain easy diff fluid changes. No need to remove or uninstall the Steeda brace.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788263886987,"sku":"555-8141","price":889.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/Brace.jpg?v=1792261825"},{"product_id":"steeda-lightweight-mustang-front-sway-bar-brackets-1987-1993","title":"Steeda Lightweight Mustang Front Sway Bar Brackets (1987-1993)","description":"\u003cp data-mce-fragment=\"1\"\u003eA common suspension upgrade for Fox body Mustang owners is a high performance front sway bar. Yet when you re-use the Ford factory stamped, strap-type brackets to attach that beefy new bar, you never get the full benefit of that upgrade due to excessive flex in the steel original. These billet aluminum sway bar brackets reinforce and eliminate that weak link.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBy more positively attaching the sway bar to the front sub-frame you minimize compliance roll and permit the bar to more efficiently reduce body roll through the turns. More precise, stable handing is the result.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInstalls easily with basic hand tools. New, longer bolts are supplied; crimp locking nuts are included.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCompatible with Steeda sway bar\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.steeda.com\/steeda-fox-body-mustang-front-swaybar-555-1087.html\" data-mce-fragment=\"1\"\u003e555 1087\u003c\/a\u003e.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788264247435,"sku":"555-8112","price":334.02,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8112.jpg?v=1792261830"},{"product_id":"bps-spring-perches-2005-2014-mustang","title":"BPS Spring Perches (2005-2014 Mustang)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur perches will allow you toŒæfine tune your ride height with a simple twist of the retaining ring. Offers 1.25äó� in adjustability which is more than sufficient to get your car sitting right.\u003c\/span\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\r\u003cul data-mce-fragment=\"1\"\u003e\r\u003cli data-mce-fragment=\"1\"\u003eCNC machined 6061-T6 aluminum\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eHard anodized for durability\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eNo fabrication needed\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eFit 2.5äó� ID coil springs\u003c\/li\u003e\r\u003c\/ul\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eComplete your order with a pair of drag springs. We offer different spring rates that will best suit your application. Simply choose your estimated axle weight (40-50% of total weight) in the designated space above. These springs replace the factory rear springs.\u003c\/span\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem class=\"x-el x-el-span c2-a c2-b c2-c c2-bc c2-t c2-bd c2-be c2-4\" data-mce-fragment=\"1\"\u003eWill not work with Moser 9\".\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"No Thanks","offer_id":50788280402059,"sku":"S001","price":200.07,"currency_code":"CAD","in_stock":true},{"title":"12in 150lbs\/in (1500+ lbs axle weight)","offer_id":50788280434827,"sku":"S001-12DP150","price":384.75,"currency_code":"CAD","in_stock":true},{"title":"10in 150lbs\/in (1250-1499 lbs axle weight)","offer_id":50788280467595,"sku":"S001-10DP150","price":384.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/perch_2323a202-a911-4163-ade5-662ab25b9e0f.jpg?v=1792262006"},{"product_id":"bps-swaybar-relocation-brackets-2005-2014-mustang","title":"BPS Swaybar Relocation Brackets (2005-2014 Mustang)","description":"\u003cspan data-mce-fragment=\"1\"\u003eInstalling 15äó� drag wheels wonäó»t happen with the stock location of the swaybar. These relocation brackets move the swaybar up higher to accommodate your new wheels. This kit includes two (2) Stainless Steel Relocation Brackets and all the necessary hardware.\u003c\/span\u003e","brand":"Billet Pro Shop","offers":[{"title":"Default Title","offer_id":50788280664203,"sku":"B002","price":69.26,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/B002_7bd6bd71-aa9a-49b7-8558-4dd2d92f0b1b.jpg?v=1792262010"},{"product_id":"2020-ford-7-3l-godzilla-engine-lift-plate","title":"BPS 2020+ Ford 7.3L Godzilla Engine Lift Plate","description":"\u003cp data-mce-fragment=\"1\"\u003eMake your swap an easy one with our engine lift plates. These bolt up to the heads using all the intake manifold bolt locations.Œæ\u003cbr\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\r\u003cul data-mce-fragment=\"1\"\u003e\r\u003cli data-mce-fragment=\"1\"\u003eOptional Black powdercoated finish\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eHardware included\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eCNC laser cut steel\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003e5 locations to lift engine from\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eBlocks intake runners for transportation\u003c\/li\u003e\r\u003c\/ul\u003e\r\u003cp data-mce-fragment=\"1\"\u003eŒæ\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Bare steel","offer_id":50788282892427,"sku":"EN027","price":152.36,"currency_code":"CAD","in_stock":true},{"title":"Black Powdercoat","offer_id":50788282925195,"sku":"EN027-B","price":200.07,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/EN027_95ecafbc-26dd-4e1d-aabb-2b2b99f12d26.jpg?v=1792262032"},{"product_id":"2011-ford-coyote-voodoo-predator-engine-lift-plate","title":"BPS 2011+ Ford Coyote\/Voodoo\/Predator Engine Lift Plate","description":"\u003cp data-mce-fragment=\"1\"\u003eMake your swap an easy one with our engine lift plates. These bolt up to the heads using all the intake manifold bolt locations.Œæ\u003cbr\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\r\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\r\u003cul data-mce-fragment=\"1\"\u003e\r\u003cli data-mce-fragment=\"1\"\u003eOptional Black powdercoated finish\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eHardware included\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eCNC laser cut steel\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003e5 locations to lift engine from\u003c\/li\u003e\r\u003cli data-mce-fragment=\"1\"\u003eBlocks intake runners for transportation\u003c\/li\u003e\r\u003c\/ul\u003e\r\u003cp data-mce-fragment=\"1\"\u003eŒæ\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Billet Pro Shop","offers":[{"title":"Bare steel","offer_id":50788285841547,"sku":"EN039","price":138.51,"currency_code":"CAD","in_stock":true},{"title":"Black Powdercoat","offer_id":50788285874315,"sku":"EN039B","price":183.14,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/coyoteliftplate_dbf32e3d-eaf6-4d41-8aad-3f2ba27d9641.jpg?v=1792262089"},{"product_id":"ford-performance-mustang-magneride-handling-pack-2018-2022-mustang","title":"FORD PERFORMANCE MUSTANG MAGNERIDE HANDLING PACK (2018-2024 Mustang)","description":"\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2018-2024 Base \u0026amp; GT Mustang Coupe and Convertible models equipped with MagneRide\u003c\/li\u003e\n\u003cli\u003eProvides improved handling with unique Ford Performance springs and sway bars\u003c\/li\u003e\n\u003cli\u003eVDM Calibration ensures compatibility between hardware and software\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Ford Performance MagneRide Handling Pack has been developed to maximize the handling potential of MagneRide equipped Base \u0026amp; GT Mustangs.  The kit includes unique springs, sway bars, and a Vehicle Dynamics Module (VDM) software update that provides a substantial improvement to MagneRide Vehicles handling performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKit includes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM-5300-W Spring Kit\u003c\/li\u003e\n\u003cli\u003eM-5490-G Sway Bar Kit\u003c\/li\u003e\n\u003cli\u003eMagneRide Performance Pack 2 VDM Software Upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eNOTE: Customers with a Performance Pack 2 equipped Mustang can upgrade by installing only the M-5300-W Spring Kit and \u003ca href=\"https:\/\/performanceparts.ford.com\/part\/M-5490-G\" target=\"_self\" data-mce-href=\"https:\/\/performanceparts.ford.com\/part\/M-5490-G\"\u003eM-5490-G\u003c\/a\u003e Sway Bar Kit\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eNOTE: Mach 1 Base and Mach 1 HP have unique MagneRide suspension calibrations similar to PP2\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ford Performance","offers":[{"title":"Default Title","offer_id":50788287316107,"sku":"M-9602-M","price":2143.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/59bf136c2389a36d24290d110024cb63.jpg?v=1792262103"},{"product_id":"steeda-mustang-mach-e-adjustable-front-sway-bar-2021-2022","title":"Steeda Mustang Mach-E Adjustable Front Sway Bar (2021-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecise CNC bends\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter turn-in\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlue powder coat finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\" solid steel with billet steel ends\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable front endlinks included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eMake your Mach-E feel more agile with this adjustable front sway bar. Designed to improve the handling of your electric SUV and give you greater control, the front sway bar is the upgrade for those that want their Mach-E to handle like a Mustang.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePremium construction.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eSteeda manufactures this 1\" solid steel sway bar in-house in the USA. Bent on a CNC-tubing bender for precision, constructed with TIG welded billet steel ends, and powder coated in-house, you can be sure that you are getting an unrivaled upgrade. Adjustable front endlinks are included for clearance with MagneRide. These feature greasable ends and an anodized billet aluminum body.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMore direct handling.\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eIf you aren't satisfied with the feel of Mach-E or simply want better turn-in, Steeda's front sway bar will help you get a more direct feel. With three adjustments, you can adjust from a slight improvement over the GT PE front sway bar to a much stiffer setting.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788287348875,"sku":"555-1033","price":767.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-1033-v1-1_thumbnail.jpg?v=1792262104"},{"product_id":"steeda-mustang-alignment-kit-for-the-s550-rear-subframe-for-bmr-cb005-sr-kit-2015-2022","title":"Steeda Mustang Alignment Kit for the S550 Rear Subframe for BMR CB005 \/ SR Kit (2015-2022)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCorrectly align the rear end\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAligns rear ends with BMR CB005 Kit \u0026amp; SR Performance IRS Tie Down Kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo increase in NVH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eYou asked and Steeda listened! The team here at Steeda went hard to work when we started fielding calls of the rear subframe being misaligned from the factory and there being no solution with the BMR CB005 \/ SR Performance IRS Tie Down kits. So here you have it, Steeda's new S550 IRS subframe alignment kit for the BMR CB005 \/ SR Performance IRS Tie Down kits!\u003c\/p\u003e\n\u003cp\u003eThe S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1\/2\" left to right. The Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other like the competition, preventing corrosion. Delrin is also less weight then aluminum or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory.\u003c\/p\u003e\n\u003cp\u003eOur Steeda S550 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary alignments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eNote: An alignment is needed upon initial installation, due to the fact it could have been mis-aligned from the factory and with it now being squared in the chassis, some adjustments might need to be made. This part is designed to fit with BMR CB005 \u0026amp; SR Performance IRS Tie Down Kits. Purchase your Steeda Alignment Kit for the S550 Rear Subframe for BMR CB005 \/ SR Performance for your 2015+ Mustang at Steeda Autosports today\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288168075,"sku":"555-4447","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-s550-mustang-alignment-kit-rear-subframe-for-bmr-cb05-555-4447-01_1.jpg?v=1792262115"},{"product_id":"steeda-explorer-ultimate-handling-package-2020-2022","title":"Steeda Explorer Ultimate Handling Package (2020-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncreased front rigidity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDresses up the engine bay\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduced body roll and brake dive\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore aggressive appearance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDurable construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWrinkle black powder-coat finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy to install at home\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore control with heavy loads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess trailer sway when towing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eAfter a sportier feel and more responsive handling from your Explorer? This Steeda Explorer Ultimate Handling Package is a comprehensive suspension kit that takes your SUV up a notch. Improving the looks, rigidity, handling, and steering response, this kit brings the best out of your Explorer or Explorer ST. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eIncreased rigidity.\u003c\/span\u003e A stamped steel strut tower brace comes standard on the Explorer ST but it may not offer the greatest performance. The Steeda strut tower brace features strong steel tubing and sturdy mounting plates to ensure great strength.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eCustom look.\u003c\/span\u003e The Steeda strut tower brace is an eye-catching upgrade over the stamped steel piece. This brace is a great way to give your SUV a unique look at meets and shows. The wrinkle black powder coat finish matches the factory trim and looks great in the engine bay. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStability and control.\u003c\/span\u003e Distributing the weight of your Explorer between the rear wheels when turning, the Steeda sway bar helps to keep your SUV level in corners and planted to the road. Trailer sway is reduced when towing and control is better with heavy payloads, so you can drive with confidence. The bar is 3-way adjustable and up to 4x the stiffness of the OE swaybar. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMore aggressive styling for any trim level.\u003c\/span\u003e With a 1-1\/8 inch drop front and rear, the Steeda springs give your Explorer a lower and more performance-oriented style without compromising the functionality of your SUV. Lowering springs are a great way to give your Explorer a unique look and set it apart from other Explorers on the road. \u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288299147,"sku":"555-2138","price":1299.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-2138-v1-1.jpg?v=1792262118"},{"product_id":"steeda-mustang-mach-e-adjustable-rear-sway-bar-2021-2022","title":"Steeda Mustang Mach-E Adjustable Rear Sway Bar (2021-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFlatter cornering\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduced body roll\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSportier feel\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e250lbs, 300lbs, 350lbs settings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDoes not affect straight-line ride quality\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC machined billet steel ends\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore control with heavy loads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess trailer sway when towing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes bushings and brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eBearing the Mustang name, you expect your SUV to feel sporty and respond well to steering inputs. If you are looking to get flatter cornering and adjustability over how your Mach-E handles, the Steeda Adjustable Rear Sway Bar is the upgrade that you need. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eBetter Performance.\u003c\/span\u003e The electric SUV has a lower center of gravity due to the battery pack, but there is still noticeable body roll when cornering. Reign in the body roll and keep your SUV flatter through corners by upgrading the sway bar. Increasing the stiffness also helps reduce understeer in corners, improving how the Mach-E performs.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eAdjustable.\u003c\/span\u003e With three different adjustments, you are able to stiffen the handling of your Mach-E to your liking. The stock swaybar has a rate of 200lbs, while the Steeda Rear Sway Bar has rates of 250lbs, 300lbs, and 350lbs. This means that you have control over how your SUV handles, and you can maximize its performance. Adjustability is simple, the hole furthest from the bar is 250lbs, while the hole closest to the bar is 350lbs.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eGreater stability.\u003c\/span\u003e A swaybar distributes the weight of your Mach-E to the wheels when making turns, helping to keep the SUV planted. By increasing the rate of the sway bar, trailer sway is reduced when towing, and control is improved with heavy payloads, so you can drive with confidence.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288397451,"sku":"555-1032","price":470.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-1032-v1-1.jpg?v=1792262120"},{"product_id":"steeda-mustang-strut-tower-cutting-tool-2015-2022","title":"Steeda Mustang Strut Tower Cutting Tool (2015-2022)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSelf-centering design for the cleanest cut possible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMetal cutting specific blade for cleanest and fastest cut\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAllows for extreme alignment specs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStrut removal not required in most cases\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSteeda's strut tower cutting tool allows you to take full advantage of your Steeda camber plates and dial in extreme negative camber without hacking up your strut towers and having to remove your struts!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDial-in Impressive angles\u003c\/span\u003e. Even after installing a Steeda camber plate, you might not be able to get the alignment specs you need due to interference between the strut nut and strut tower. In this instance, opening up the hole diameter in your strut tower is mandatory to achieve the handling performance you desire without compromise. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eClean stock appearance.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSteeda's tool design uses a premium grade metal cutting hole saw to produce a perfectly concentric hole centered on the factory original rather than notching the strut tower with a cut off wheel or die grinder. Using the outer diameter of the Delrin guide plug, the cutting teeth produce a clean cut that can be deburred with fine sandpaper to prevent finger cuts when making alignment adjustments. The Morse hole saw Steeda uses in their kit is specifically designed to cut metal not wood and provides the fastest and cleanest cut possible. The raw metal edge can be sanded smooth and finished with either regular paint or touch up paint matching your body color for a near-identical appearance to stock.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo hassle mod.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eUntil now no other product allowed you to enlarge your strut tower hole without removing your struts and having to take your car in for realignment. Steeda designed their tool with a clearance hole in the Delrin guide plug that fits over OE and most aftermarket most strut nuts. Furthermore, the Steeda design does not use a drill bushing that relies on the 1\/4\" pilot bit to center the hole. The smooth Delrin bushing provides perfect self-alignment and cannot snap like a 1\/4\" pilot bit in the middle of the hole cutting operation. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with most hole saw arbors.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe 2-3\/4\" hole saw Steeda uses is universally compatible with most hole saw arbors with a threaded 5\/8\"-18 threaded inner diameter regardless of pilot bit  since our design eliminates the need for a 1\/4\" pilot drill bit. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNon-returnable, no warranty part.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe hole saw included with this kit is a consumable item meaning it will become dull after multiple uses and teeth can chip off due to operator error at excessive drill speed. The Delrin pilot plug may also become worn due to the sacrificial nature of it's precise self centering design. Using slow drill RPM, moderate pressure and cutting oil on both the Delrin plug and Bi-metal cutting teeth will maximize the life of this tool. We believe your Mustang is an investment that justifies the expense of doing the job correctly with this tool and will maintain the value of your car. \u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788288495755,"sku":"555-8920","price":119.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8920-2.jpg?v=1792262121"},{"product_id":"steeda-mustang-rear-lower-control-arm-bushings-2015-2022","title":"Steeda Mustang Rear Lower Control Arm Bushings (2015-2024)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReplacement and upgrade\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess bushing deflection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRestores handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eThis rear LCA bushing kit replaces the inner, front bushing of the rear lower control arm. This replaces a worn factory bushing to correct uneven tire wear, unpredictable handling, and poor braking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eReplace and upgrade.\u003c\/span\u003e A worn bushing can negatively impact performance, tire life, braking, and other important aspects of driving. Restore the handling and functionality by replacing the bushing with this upgraded polyurethane one. The polyurethane will have a longer life in addition to less deflection.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788289249419,"sku":"555-4047","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/W63498-s550_thumbnail.jpg?v=1792262137"},{"product_id":"steeda-mustang-irs-subframe-replacement-bushings-2015-2022","title":"Steeda Mustang IRS Subframe Replacement Bushings (2015-2024)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImprove traction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReplaces factory bushing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces wheel hop and IRS movement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter launching and cornering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv\u003eSteeda's IRS replacement bushings are the big brother to the bushing inserts. These are polyurethane bushings that completely replace the factory bushings. While they offer more support and are great for racing applications, the installation process is more involved. Rather than the costly process of replacing the complete subframe, these give you the ability to fix and even upgrade your S550's existing subframe.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eGreater support.\u003c\/span\u003e The factory bushings leave a lot to be desired due to their compliance and voiding. These replacement bushings offer even more support than an insert kit and are the way to go if you do a lot of racing or have a power adder on your Mustang. Take control and eliminate unwanted IRS movement with this bushing kit. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePolyurethane bushings.\u003c\/span\u003e A step up over the stock rubber bushings, these solid polyurethane bushings will put an end to your wheel hop. Polyurethane is not as compliant as rubber and will offer greater support when cornering or launching. \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788289314955,"sku":"555-4046","price":85.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/kdt953_s550_thumbnail.jpg?v=1792262138"},{"product_id":"steeda-mustang-differential-mount-replacement-bushings-2015-2022","title":"Steeda Mustang Differential Mount Replacement Bushings (2015-2023)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReplacement and upgrade\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter traction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduced wheel hop\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved times at the track\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreater control\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAvoid sub-frame replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSteeda differential mount replacement bushings are a great way to improve the handling of your Mustang and put power to the ground. These are a replacement and upgrade to the soft factory bushings that will deflect and cause wheel hop.\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eReign in your Mustang.\u003c\/span\u003e Wheel hop and bushing deflection can make your Mustang difficult to launch or control. These bushings are made from polyurethane and will let you put the power down, brake, and take sharp corners without wheel hop.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eLabor and cash savings\u003c\/span\u003e: As the IRS Mustangs get used and abused on the street and track, the OE rubber bushings are prone to failure. Up until now, your only repair option was to source a new or used rear sub-frame with the same non-serviceable failure prone rubber bushings. Steeda's more durable polyurethane bushings retain your shell and replace the bushing and sleeve. New hardware is included in the event your old bolts are bent or busted.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788289347723,"sku":"555-4048","price":269.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/kdt933_s550.png?v=1792262139"},{"product_id":"koni-mustang-str-t-street-shock-and-strut-pack-1994-2004","title":"Koni Mustang STR.T Street Shock and Strut Pack (1994-2004)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTwin-tube low pressure gas design\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect bolt-on replacement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eKoni Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThis Koni STR.T Street Series Shock and Strut Pack are high performance, nonadjustable dampers that are designed to be a perfect complement to lowering springs. These 1994-2004 Mustang Shocks and Struts are conveniently packaged for you and include 2 Koni STR.T Street Series Shocks and 2 Koni STR.T Street Series Struts.\u003c\/p\u003e\n\u003cp\u003eKoni STR.T shock and strut units are a direct bolt on, nonadjustable, twin-tube low-pressure gas design that will enhance both ride quality and handling performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eKoni Sport STR.T Street Shocks and Struts are NOT adjustable. Fits 1994-2004 Mustang, All V6 \u0026amp; V8 (SN95) excl. IRS\u003c\/p\u003e","brand":"Koni","offers":[{"title":"Default Title","offer_id":50788289839243,"sku":"1125 KIT","price":695.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/KONI-SHOCK-STURTS-ORG.jpg?v=1792262148"},{"product_id":"steeda-mustang-35mm-front-sway-bar-1994-2004","title":"Steeda Mustang 35mm Front Sway Bar (1994-2004)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnd link kit 122-9-8124-G required for 1994-1995 Mustangs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2003-2004 Mustang Cobra requires 555-8124 sway bar spacer kit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1996-2004 Mustangs re-use the factory end link bushings\u003c\/li\u003e\n\u003c!-- split --\u003e\n\u003c\/ul\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003e  Factory\u003c\/th\u003e\n\u003cth\u003e    Steeda\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e94-95 GT\u003c\/td\u003e\n\u003ctd\u003e  27mm\u003c\/td\u003e\n\u003ctd\u003e    150% stiffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e94-95 Cobra\u003c\/td\u003e\n\u003ctd\u003e  25mm\u003c\/td\u003e\n\u003ctd\u003e    220% stiffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e95 Cobra R\u003c\/td\u003e\n\u003ctd\u003e  33mm\u003c\/td\u003e\n\u003ctd\u003e    15% stiffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e97-98 Cobra\u003c\/td\u003e\n\u003ctd\u003e  29mm\u003c\/td\u003e\n\u003ctd\u003e    85% stiffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e99-02\u003c\/td\u003e\n\u003ctd\u003e  27mm\u003c\/td\u003e\n\u003ctd\u003e    150% stiffer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Steeda 35mm Front Sway Bar is the perfect way to get better handling from your SN95 or New Edge Mustang. Steeda's sway bar delivers exceptional performance and has proven results with testing on both the street and track. The reduced body roll and better handling give your Mustang a whole new feel and make driving even more enjoyable. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSteeda Sway bar Spacer Kit required on 2003 \u0026amp; 2004 Cobra Mustangs\u003c\/p\u003e\n\u003csection\u003e\u003cspan\u003eBetter handling on the street and the track.\u003c\/span\u003e The Steeda sway bar offers much-improved handling. The bar helps to reduce body roll for a level car throughout turns and curves and corrects oversteer at the track. If you are looking for a way to give your Mustang tighter handling and a more responsive feel, look no further. \u003c\/section\u003e\n\u003csection\u003e\u003cbr\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cspan\u003eGreat construction for long-lasting performance.\u003c\/span\u003e The 35mm front sway bar is made in the USA from tubular steel for great quality. The sway bar features billet steel end caps, rather than coined ends. This end is stronger than a coined end and reduces deflection.\u003c\/section\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788289970315,"sku":"555-1094","price":484.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-1094_5904b93b-8de8-4cf3-80f4-46782ff706ae.jpg?v=1792262151"},{"product_id":"steeda-mustang-aluminum-rear-lower-control-arms-4500-series-1999-2004","title":"Steeda Mustang Aluminum Rear Lower Control Arms - 4500 Series (1999-2004)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe 4500 series is best for street cars, road racing, and occasional drag strip use.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe 4600 series is best for drag racers who consistently see 60 foot times of 1.65 or better, and for heavy (3500+lb) street and road race cars with more than 400 rear wheel horsepower.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess NVH than arms with spherical bearings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/2 the weight of the competition's control arms\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard bushing centers control the axle for maximum traction and handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSofter outer bushings edges won't squeak or bind\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWon't damage torque boxes like other arms with solid bushings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh-strength extruded 6061 T-6 Alum. eliminates flex \u0026amp; reduces unsprung weight 32%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/3 the weight of lift bars!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eSteeda's Aluminum Lower Control Arms really hook, for the lowest 60 ft. times and maximum control off corners. They are a direct bolt-on, with sway bar mounts located to clear differential stud girdles and T-Rex fuel pumps.\u003c\/p\u003e\n\u003cp\u003eDon't be fooled by imitators! Steeda's Aluminum lower rear control arms are the only ones that use our exclusive three part variable rate bushings to eliminate suspension bind and control noise and vibration while planting your tires to the pavement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDoes not fit 1999-2004 Cobra\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788290035851,"sku":"555-4551","price":621.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-4551.jpg?v=1792262152"},{"product_id":"cd4-fusion-adjustable-front-sway-bar-endlinks-2013-2020","title":"CD4 Fusion Adjustable Front Sway Bar Endlinks (2013-2020)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAs silent as factory units in street use\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAerospace grade aluminum center adjusters\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDouble adjustable design for adjustment without removing them from the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's adjustable swaybar end links make a great upgrade for the stock end links as well as the perfect dual purpose street\/open track piece.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFor competition use our double adjustable design makes it adjustable on the car and allows to both retain proper swaybar geometry on lowered cars and adjust swaybar preload for suspension fine tuning.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe adjustment body is constructed from lightweight aerospace grade aluminum and is corrosion resistant. End links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788290429067,"sku":"555-1044","price":340.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-1044-v1-1.jpg?v=1792262159"},{"product_id":"steeda-cd4-fusion-adjustable-rear-sway-bar-endlinks-2013-2020","title":"Steeda CD4 Fusion Adjustable Rear Sway Bar Endlinks (2013-2020)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAs silent as factory units in street use\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAerospace grade aluminum center adjusters\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDouble adjustable design for adjustment without removing them from the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's adjustable swaybar end links make a great upgrade for the stock end links as well as the perfect dual purpose street\/open track piece. For street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units. For competition use our double adjustable design makes it adjustable on the car and allows to both retain proper swaybar geometry on lowered cars and adjust swaybar preload for suspension fine tuning. The adjustment body is constructed from lightweight aerospace grade aluminum and is corrosion resistant. End links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788290494603,"sku":"555-1045","price":303.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/5551045-A.jpg?v=1792262160"},{"product_id":"steeda-fusion-sport-front-sway-bar-2017-2020","title":"Steeda Fusion Sport Front Sway Bar (2017-2020)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e48% stiffer than stock sway bar\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes bushings and brackets\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces body roll\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduces understeer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's Fusion Front Sway Bar for the 2017+ Fusion Sport increases roll stiffness by 48%. This increase in stiffness improves vehicle handling performance by greatly reducing understeer and also reduces overall vehicle body roll. This front sway bar is the perfect compliment to our Fusion Rear Sway bar (555-1090).\u003c\/span\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788290592907,"sku":"555-1078","price":951.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/fusion-sport-front-swaybar.jpg?v=1792262162"},{"product_id":"steeda-escape-1-lowering-springs-2020-2022","title":"Steeda Escape 1\" Lowering Springs (2020-2022)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\" drop AWD models\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLevels your Escape\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProgressive spring rate\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLike stock comfort\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent performance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReduced brake dive\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLower center of gravity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter stability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSportier appearance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLess fender gap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eLower and level your 2020-2022 Escape with a set of Steeda Lowering Springs. Steeda's springs are a direct fit and give your Ford better handling, performance, and styling without compromising comfort or greatly reducing ground clearance. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan\u003eMore predictable handling.\u003c\/span\u003e Drive comfortably and with confidence when you upgrade to the Steeda springs. Offering greater stability, reduced brake dive, and less body roll, your fourth-generation Escape will feel like a different car. Lowering the SUV an inch lowers the center of gravity as well, giving you greater stability and a planted feeling on the road. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eRefined spring rate.\u003c\/span\u003e With in-house testing combined with years of expertise and knowledge, Steeda precisely chose a progressive spring rate. The springs provide a comfortable ride, similar to the stock springs during your commute. However, in the corners and during spirited driving, the testing and tuning of these springs really become noticeable. You will get a more lively, agile, and exciting experience in your Ford.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788292427915,"sku":"555-8204","price":683.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-8204-v2-1.jpg?v=1792262192"},{"product_id":"steeda-escape-rear-sway-bar-2020-2022","title":"Steeda Escape\/Maverick AWD Rear Sway Bar (2020-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eNeutral and flat handling\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003cli\u003eMore control with heavy loads\u003c\/li\u003e\n\u003cli\u003eLess trailer sway when towing\u003c\/li\u003e\n\u003cli\u003eMaintains a comfortable ride\u003c\/li\u003e\n\u003cli\u003e1.00\" tubular steel sway bar\u003c\/li\u003e\n\u003cli\u003e3-way adjustable\u003c\/li\u003e\n\u003cli\u003e280lb, 350lb, and 450lb rates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eSteeda's Escape\/Maverick AWD adjustable rear sway bar gives you control of your Ford's handling. The sway bar reduces body roll for more neutral handling helping you take corners better. The sway bar offers a comfortable ride for your CUV but keeps things level through corners.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStability and control.\u003c\/span\u003e Distributing the weight of your Escape or Maverick between the rear wheels when turning, the sway bar helps to keep your Ford level in corners and planted to the road. Trailer sway is reduced when towing and control is better with heavy payloads, so you can drive with confidence.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eStrong construction.\u003c\/span\u003e Steeda's sway bar is designed, engineered, and manufactured in the USA and is made from 1-inch tubular Chromoly steel tubing for long-lasting performance and durability. CNC-machined billet steel ends offer greater strength than the coined ends on other bars. The bar is powder-coated Steeda blue for protection from the elements and to let people know your Escape is equipped with Steeda parts.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eSporty feel.\u003c\/span\u003e The flat and level handling that the sway bar provides makes driving more exciting and enjoyable. Get tight handling like a sports car with the upgraded sway bar. 3-way adjustability lets you fine-tune the sway bar stiffness to meet your needs and provide the control you want. At its softest, the bar is 280lb per inch and at its stiffest, the bar is 450lb per inch, a lot stiffer than your factory 270lb per inch sway bar. It is recommended that you start at the middle adjustment hole for the first setup.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788292460683,"sku":"555-1031","price":369.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/steeda-555-1031-1.jpg?v=1792262193"},{"product_id":"steeda-escape-bronco-sport-strut-tower-brace-2020-2022","title":"Steeda Escape\/Bronco Sport\/Maverick Strut Tower Brace - Black (2020-2026)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSporty look\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBetter steering response\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreater stability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSimple to install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTextured black powder coat finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDoes not fit hybrid models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003e\u003cspan\u003eIf you are looking to add a custom look to your engine bay and want better steering response, the Steeda strut tower brace is the perfect upgrade. This brace adds a custom touch while blending with the factory trim for a clean and stylish look when you pop the hood. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eTextured finish.\u003c\/span\u003e The brace has a seamless look with the rest of your engine bay. A textured black finish is applied to the brace and gives the brace a similar look to the factory trim and pieces.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003ePredictable handling.\u003c\/span\u003e Stiffening and supporting the strut towers will help reduce flex and improve the response of your vehicle when turning. This is a great way to get a more exciting feel and better handling from your Ford. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eNote:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eWill not fit hybrid models.\u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788292493451,"sku":"555-5736","price":239.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-5736-v1-1.jpg?v=1792262194"},{"product_id":"steeda-mustang-gt350-mach-1-handling-ultimate-kit-2015-2021","title":"Steeda Mustang GT350\/Mach 1 Handling Ultimate Kit (2015-2021)","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEliminate wheel hop with little to no increase in NVH\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEliminate subframe movement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSimple install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSquares subframe to the chassis\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo permanent modifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMore predictable handling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreater control and stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop and improve the handling of their GT350 or Mach 1. This is where the Handling Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop and bushing deflection in the new S550 Mustang to help you take corners faster and get tack sharp handling. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e\n\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003cbr\u003e\u003cbr\u003eThe 2nd component of this kit is the strongest support brace for the S550 IRS on the market!! Made in-house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSteeda's Rear Toe Links are the 3rd item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda. \u003c\/p\u003e\n\u003cp\u003e4th in the kit, the Steeda Billet Vertical Links with Urethane Bushings reduce deflection and tighten the rear of your S550. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground and improve control, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cause sloppy or soft handling and will hold your Ford back from reaching its full potential. \u003c\/p\u003e\n\u003cp\u003eLastly is our tried and true GT350\/Mach 1 IRS Subframe Bushing Support System. This 6 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-rear-irs-subframe-support-braces-555-5754\"\u003e555-5754\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/steeda-mustang-gt350-mach-1-irs-subframe-bushing-support-system-2016-2022\"\u003e555-4449\u003c\/a\u003e -\u003c\/span\u003e Steeda GT350\/Mach 1 Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/steeda.ca\/products\/s550-irs-subframe-aligment-kit-555-4438\"\u003e555-4438\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e- Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/mustang-billet-aluminum-vertical-links-polyurethane-bushings\"\u003e555-4129\u003c\/a\u003e - \u003c\/span\u003eSteeda Billet Aluminum Vertical Links with Urethane Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/steeda.ca\/products\/s550-mustang-adjustable-rear-toe-links-555-4120\"\u003e555-4120\u003c\/a\u003e - \u003c\/span\u003eSteeda Adjustable Rear Toe Links\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":50788293673099,"sku":"555-2129-G","price":1733.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0805\/7418\/5611\/files\/555-2129-G-v2-1.jpg?v=1792262218"}],"url":"https:\/\/www.steeda.ca\/collections\/suspension.oembed?page=2","provider":"Steeda Canada","version":"1.0","type":"link"}